From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>,
Ben Herrenschmidt <benh@kernel.crashing.org>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org
Subject: Re: CONFIG_PREEMPT_RCU in next/mmotm
Date: Mon, 10 Aug 2009 15:43:45 -0700 [thread overview]
Message-ID: <20090810224345.GA17730@linux.vnet.ibm.com> (raw)
In-Reply-To: <20090810033907.GA1530@linux.vnet.ibm.com>
On Sun, Aug 09, 2009 at 08:39:07PM -0700, Paul E. McKenney wrote:
> On Sun, Aug 09, 2009 at 02:16:29PM -0700, Paul E. McKenney wrote:
> > On Sun, Aug 09, 2009 at 09:53:53PM +0100, Hugh Dickins wrote:
> > > On Sun, 9 Aug 2009, Paul E. McKenney wrote:
> > > >
> > > > I introduced the problem in commit 7fe616c5dd50a50f334edec1ea0580b90b7af0d9
> > > > by changing from register_cpu_notifier() to hotcpu_notifier(). The former
> > > > lets you know when CPUs come on line unconditionally, the latter only
> > > > when CONFIG_HOTPLUG_CPU is in effect.
> > > >
> > > > But hotcpu_notifier() is much nicer to use, so I propose introducing
> > > > a cpu_notifier() that is invoked like hotcpu_notifier() is, but is
> > > > unconditional in the same way that register_cpu_notifier().
> > > >
> > > > Something like the following (untested, probably does not compile):
> > > >
> > > > diff --git a/include/linux/cpu.h b/include/linux/cpu.h
> > > > index 4d668e0..d5dfc1f 100644
> > > > --- a/include/linux/cpu.h
> > > > +++ b/include/linux/cpu.h
> > > > @@ -48,6 +48,15 @@ struct notifier_block;
> > > >
> > > > #ifdef CONFIG_SMP
> > > > /* Need to know about CPUs going up/down? */
> > > > +#if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE)
> > > > +#define cpu_notifier(fn, pri) { \
> > > > + static struct notifier_block fn##_nb __cpuinitdata = \
> > > > + { .notifier_call = fn, .priority = pri }; \
> > > > + register_cpu_notifier(&fn##_nb); \
> > > > +}
> > > > +#else /* #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
> > > > +#define cpu_notifier(fn, pri) do { (void)(fn); } while (0)
> > > > +#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
> > > > #ifdef CONFIG_HOTPLUG_CPU
> > > > extern int register_cpu_notifier(struct notifier_block *nb);
> > > > extern void unregister_cpu_notifier(struct notifier_block *nb);
> > > > @@ -99,11 +108,7 @@ extern struct sysdev_class cpu_sysdev_class;
> > > >
> > > > extern void get_online_cpus(void);
> > > > extern void put_online_cpus(void);
> > > > -#define hotcpu_notifier(fn, pri) { \
> > > > - static struct notifier_block fn##_nb __cpuinitdata = \
> > > > - { .notifier_call = fn, .priority = pri }; \
> > > > - register_cpu_notifier(&fn##_nb); \
> > > > -}
> > > > +#define hotcpu_notifier(fn, pri) cpu_notifier(fn, pri)
> > > > #define register_hotcpu_notifier(nb) register_cpu_notifier(nb)
> > > > #define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb)
> > > > int cpu_down(unsigned int cpu);
> > > > diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
> > > > index 9f0584e..c1bbfd5 100644
> > > > --- a/kernel/rcupdate.c
> > > > +++ b/kernel/rcupdate.c
> > > > @@ -251,7 +251,7 @@ void __init rcu_init(void)
> > > > int i;
> > > >
> > > > __rcu_init();
> > > > - hotcpu_notifier(rcu_barrier_cpu_hotplug, 0);
> > > > + cpu_notifier(rcu_barrier_cpu_hotplug, 0);
> > > >
> > > > /*
> > > > * We don't need protection against CPU-hotplug here because
> > > >
> > > [ removed repeat of rcupdate.c patch ]
> > > >
> > > > Thoughts?
> > >
> > > That builds and works for me, with or without CONFIG_HOTPLUG_CPU.
> > >
> > > But I didn't get what you're achieving with the MODULE part of it;
> > > and (I'm not a notifier buff at all) it does seems rather baroque to
> > > me - a single callsite, why not stick with register_cpu_notifier()?
> > >
> > > Ah, perhaps it's your ambition to move others over to this
> > > (or perhaps it's your ambition to leave that to someone else ;-)
> >
> > Actually, nothing quite that clearly thought out. I was just following
> > the pattern set for register_cpu_notifier(). My guess at the reasoning
> > is that when !HOTPLUG_CPU, modules cannot be loaded until all the CPUs
> > are online, so there is no point in letting a module set itself up for
> > notification.
> >
> > But whatever their reasoning, mine was that there is no point in
> > creating a struct notifier_block that wasn't going to be used. ;-)
>
> And the above patch fails for !CONFIG_SMP. Here is an update, testing
> in progress. Still not fully tested, but results are encouraging.
> In particular, this one is more likely to compile.
And this handled !CONFIG_SMP, but fails two of fifteen test cases.
So better, but still far from perfect.
Chasing the failures down.
Thanx, Paul
next prev parent reply other threads:[~2009-08-10 22:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-08 19:34 Hugh Dickins
2009-08-08 23:56 ` Paul E. McKenney
2009-08-09 3:32 ` Hugh Dickins
2009-08-09 5:33 ` Paul E. McKenney
2009-08-09 11:24 ` Hugh Dickins
2009-08-09 13:06 ` Hugh Dickins
2009-08-09 18:57 ` Paul E. McKenney
2009-08-09 20:53 ` Hugh Dickins
2009-08-09 21:16 ` Paul E. McKenney
2009-08-10 3:39 ` Paul E. McKenney
2009-08-10 22:43 ` Paul E. McKenney [this message]
2009-08-12 1:34 ` Paul E. McKenney
2009-08-12 9:22 ` Ingo Molnar
2009-08-13 0:51 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090810224345.GA17730@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=hugh.dickins@tiscali.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome