mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ingo Molnar <mingo@elte.hu>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Zachary Amsden <zach@vmware.com>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Xiao Guangrong <xiaooguangrong@cn.fujitsu.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org
Subject: Re: linux-next: reservetop fix disables mem=
Date: Mon, 24 Aug 2009 20:27:13 +0200	[thread overview]
Message-ID: <20090824182713.GB9785@elte.hu> (raw)
In-Reply-To: <4A92D029.8090807@kernel.org>


* Yinghai Lu <yinghai@kernel.org> wrote:

> Hugh Dickins wrote:
> > I find the "mem=" boot parameter disabled in today's linux-next:
> > reverting the tip commit below fixes that.
> > 
> > Hugh
> > 
> > From: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
> > Date: Thu, 20 Aug 2009 12:23:11 +0000 (+0800)
> > Subject: x86: Fix system crash when loading with "reservetop" parameter
> > X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fmingo%2Flinux-2.6-x86.git;a=commitdiff_plain;h=8126dec32738421afa362114337331337b4be17f
> > 
> > x86: Fix system crash when loading with "reservetop" parameter
> > 
> > The system will die if the kernel is booted with "reservetop"
> > parameter, in present code, parse "reservetop" parameter after
> > early_ioremap_init(), and some function still use
> > early_ioremap() after it.
> > 
> > The problem is, "reservetop" parameter can modify
> > 'FIXADDR_TOP', then the virtual address got by early_ioremap()
> > is base on old 'FIXADDR_TOP', but the page mapping is base on
> > new 'FIXADDR_TOP', it will occur page fault, and the IDT is not
> > prepare yet, so, the system is dead.
> > 
> > So, put parse_early_param() in the front of
> > early_ioremap_init() in this patch.
> > 
> > Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
> > Cc: yinghai@kernel.org
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > LKML-Reference: <4A8D402F.4080805@cn.fujitsu.com>
> > Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > ---
> > 
> > diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> > index 63f32d2..02643cc 100644
> > --- a/arch/x86/kernel/setup.c
> > +++ b/arch/x86/kernel/setup.c
> > @@ -711,6 +711,11 @@ void __init setup_arch(char **cmdline_p)
> >  	printk(KERN_INFO "Command line: %s\n", boot_command_line);
> >  #endif
> >  
> > +	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
> > +	*cmdline_p = command_line;
> > +
> > +	parse_early_param();
> > +
> >  	/* VMI may relocate the fixmap; do this before touching ioremap area */
> >  	vmi_init();
> >  
> > @@ -793,11 +798,6 @@ void __init setup_arch(char **cmdline_p)
> >  #endif
> >  #endif
> >  
> > -	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
> > -	*cmdline_p = command_line;
> > -
> > -	parse_early_param();
> > -
> >  #ifdef CONFIG_X86_64
> >  	check_efer();
> >  #endif
> 
> yes, that patch will break other built-in command too.
> 
> need drop that patch.

done. Was nervous about the patch already:

  http://lkml.org/lkml/2009/8/21/127

> also the problem was caused by vmi patch, and that commit should 
> be reverted.
>
> commit ae8d04e2ecbb233926860e9ce145eac19c7835dc
> Author: Zachary Amsden <zach@vmware.com>
> Date:   Sat Dec 13 12:36:58 2008 -0800
> 
>     x86 Fix VMI crash on boot in 2.6.28-rc8
>     
>     VMI initialiation can relocate the fixmap, causing early_ioremap to
>     malfunction if it is initialized before the relocation.  To fix this,
>     VMI activation is split into two phases; the detection, which must
>     happen before setting up ioremap, and the activation, which must happen
>     after parsing early boot parameters.
>     
>     This fixes a crash on boot when VMI is enabled under VMware.
>     
>     Signed-off-by: Zachary Amsden <zach@vmware.com>
>     Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
> 
> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> index 9d5674f..bdec76e 100644
> --- a/arch/x86/kernel/setup.c
> +++ b/arch/x86/kernel/setup.c
> @@ -794,6 +794,9 @@ void __init setup_arch(char **cmdline_p)
>         printk(KERN_INFO "Command line: %s\n", boot_command_line);
>  #endif
>  
> +       /* VMI may relocate the fixmap; do this before touching ioremap area */
> +       vmi_init();
> +
>         early_cpu_init();
>         early_ioremap_init();
>  
> @@ -880,13 +883,8 @@ void __init setup_arch(char **cmdline_p)
>         check_efer();
>  #endif
>  
> -#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
> -       /*
> -        * Must be before kernel pagetables are setup
> -        * or fixmap area is touched.
> -        */
> -       vmi_init();
> -#endif
> +       /* Must be before kernel pagetables are setup */
> +       vmi_activate();
>  
>         /* after early param, so could get panic from serial */
>         reserve_early_setup_data();
> 
> 
> and according to
> http://lkml.org/lkml/2008/12/10/388
> http://lkml.org/lkml/2008/12/10/456
> 
> Zachary should split reserve_top_address() to two functions... 
> before sending that patch to Linus

mind looking at this yourself if interested? Zachary has not been 
active for quite some time.

	Ingo

  reply	other threads:[~2009-08-24 18:28 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-24 16:45 Hugh Dickins
2009-08-24 17:38 ` Yinghai Lu
2009-08-24 18:27   ` Ingo Molnar [this message]
2009-08-28 19:28     ` Yinghai Lu
2009-09-06  6:56     ` Yinghai Lu
2009-09-16  0:23     ` Hugh Dickins
2009-09-19 17:55       ` Ingo Molnar
2009-09-19 18:02         ` Yinghai Lu
2009-09-19 18:07           ` Yinghai Lu
2009-09-19 18:32             ` Ingo Molnar
2009-09-19 18:33             ` [tip:x86/urgent] Revert 'x86: Fix system crash when loading with "reservetop" parameter' tip-bot for Yinghai Lu
2009-08-26  1:13   ` linux-next: reservetop fix disables mem= Xiao Guangrong
2009-09-01  7:55     ` [RFC][PATCH] x86: introduce parse_early_param_alone() to parse param early (Was Re: linux-next: reservetop fix disables mem= ) Xiao Guangrong
2009-09-01 15:17       ` Américo Wang
2009-09-03  6:04         ` Xiao Guangrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090824182713.GB9785@elte.hu \
    --to=mingo@elte.hu \
    --cc=akpm@linux-foundation.org \
    --cc=hpa@zytor.com \
    --cc=hugh.dickins@tiscali.co.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=xiaooguangrong@cn.fujitsu.com \
    --cc=yinghai@kernel.org \
    --cc=zach@vmware.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®