From: Ingo Molnar <mingo@elte.hu>
To: Darren Hart <dvhltc@us.ibm.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>,
linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
Peter Zijlstra <peterz@infradead.org>,
Steven Rostedt <rostedt@goodmis.org>,
Dinakar Guniguntala <dino@in.ibm.com>,
John Stultz <johnstul@us.ibm.com>
Subject: Re: [PATCH 5/5] futex: fix wakeup race by setting TASK_INTERRUPTIBLE before queue_me
Date: Tue, 22 Sep 2009 21:26:49 +0200 [thread overview]
Message-ID: <20090922192649.GB12342@elte.hu> (raw)
In-Reply-To: <4AB907AD.1020605@us.ibm.com>
* Darren Hart <dvhltc@us.ibm.com> wrote:
> Eric Dumazet wrote:
>> Darren Hart a ??crit :
>>> PI futexes do not use the same plist_node_empty() test for wakeup. It was
>>> possible for the waiter (in futex_wait_requeue_pi()) to set TASK_INTERRUPTIBLE
>>> after the waker assigned the rtmutex to the waiter. The waiter would then note
>>> the plist was not empty and call schedule(). The task would not be found by any
>>> subsequeuent futex wakeups, resulting in a userspace hang. By moving the
>>> setting of TASK_INTERRUPTIBLE to before the call to queue_me(), the race with
>>> the waker is eliminated. Since we no longer call get_user() from within
>>> queue_me(), there is no need to delay the setting of TASK_INTERRUPTIBLE until
>>> after the call to queue_me().
>>>
>>> The FUTEX_LOCK_PI operation is not affected as futex_lock_pi() relies entirely
>>> on the rtmutex code to handle schedule() and wakeup. The requeue PI code is
>>> affected because the waiter starts as a non-PI waiter and is woken on a PI
>>> futex.
>>>
>>> Remove the crusty old comment about holding spinlocks() across get_user() as we
>>> no longer do that. Correct the locking statement with a description of why the
>>> test is performed.
>>
>> I am very confused by this ChangeLog...
>>
>>> Signed-off-by: Darren Hart <dvhltc@us.ibm.com>
>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>> Cc: Peter Zijlstra <peterz@infradead.org>
>>> Cc: Steven Rostedt <rostedt@goodmis.org>
>>> Cc: Ingo Molnar <mingo@elte.hu>
>>> CC: Eric Dumazet <eric.dumazet@gmail.com>
>>> CC: Dinakar Guniguntala <dino@in.ibm.com>
>>> CC: John Stultz <johnstul@us.ibm.com>
>>> ---
>>>
>>> kernel/futex.c | 15 +++------------
>>> 1 files changed, 3 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/kernel/futex.c b/kernel/futex.c
>>> index f92afbe..463af2e 100644
>>> --- a/kernel/futex.c
>>> +++ b/kernel/futex.c
>>> @@ -1656,17 +1656,8 @@ out:
>>> static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q,
>>> struct hrtimer_sleeper *timeout)
>>> {
>>> - queue_me(q, hb);
>>> -
>>> - /*
>>> - * There might have been scheduling since the queue_me(), as we
>>> - * cannot hold a spinlock across the get_user() in case it
>>> - * faults, and we cannot just set TASK_INTERRUPTIBLE state when
>>> - * queueing ourselves into the futex hash. This code thus has to
>>> - * rely on the futex_wake() code removing us from hash when it
>>> - * wakes us up.
>>> - */
>>> set_current_state(TASK_INTERRUPTIBLE);
>>
>> Hmm, you missed the smp_mb() properties here...
>>
>> Before :
>> queue_me()
>> set_mb(current->state, TASK_INTERRUPTIBLE);
>> if (timeout) {...}
>> if (likely(!plist_node_empty(&q->list))) {
>> ...
>> }
>>
>> After :
>> set_mb(current->state, TASK_INTERRUPTIBLE);
>> queue_me();
>> if (timeout) {...}
>> // no barrier... why ar we still testing q->list
>> // since it has no synchro between queue_me() and test ?
>
> As Ingo said, the barrier is covered by the spin_unlock() in queue_me()
> according to memory-barriers.txt:
>
>
> (2) UNLOCK operation implication:
>
> Memory operations issued before the UNLOCK will be completed before
> the UNLOCK operation has completed.
btw., it might make sense to add a comment about this - it's not trivial
at all and the barrier rules here are tricky ...
Ingo
next prev parent reply other threads:[~2009-09-22 19:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-22 5:29 [PATCH 0/5] Futex cleanups and race fix Darren Hart
2009-09-22 5:29 ` [PATCH 1/5] futex: correct futex_wait_requeue_pi() commentary Darren Hart
2009-09-22 8:40 ` [tip:core/urgent] futex: Correct " tip-bot for Darren Hart
2009-09-22 5:30 ` [PATCH 2/5] futex: correct queue_me and unqueue_me commentary Darren Hart
2009-09-22 8:40 ` [tip:core/urgent] futex: Correct " tip-bot for Darren Hart
2009-09-22 5:30 ` [PATCH 3/5] futex: make function kernel-doc commentary consistent Darren Hart
2009-09-22 8:41 ` [tip:core/urgent] futex: Make " tip-bot for Darren Hart
2009-09-22 5:30 ` [PATCH 4/5] futex: correct futex_q woken state commentary Darren Hart
2009-09-22 8:41 ` [tip:core/urgent] futex: Correct " tip-bot for Darren Hart
2009-09-22 5:30 ` [PATCH 5/5] futex: fix wakeup race by setting TASK_INTERRUPTIBLE before queue_me Darren Hart
2009-09-22 8:38 ` Eric Dumazet
2009-09-22 9:10 ` Ingo Molnar
2009-09-22 17:21 ` Darren Hart
2009-09-22 19:26 ` Ingo Molnar [this message]
2009-09-22 8:41 ` [tip:core/urgent] futex: Fix wakeup race by setting TASK_INTERRUPTIBLE before queue_me() tip-bot for Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090922192649.GB12342@elte.hu \
--to=mingo@elte.hu \
--cc=dino@in.ibm.com \
--cc=dvhltc@us.ibm.com \
--cc=eric.dumazet@gmail.com \
--cc=johnstul@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®