i also have a crash with vanilla -rc4, test on this commit: d93a8f8: Revert "USB: Work around BIOS bugs by quiescing USB controllers earlier" crashlog pasted below - config attached. Ingo Linux version 2.6.32-rc4 (mingo@aldebaran) (gcc version 4.4.2 20091002 (prerelease) (GCC) ) #1 Mon Oct 12 11:22:47 CEST 2009 Command line: root=/dev/sda3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) bootconsole [earlyser0] enabled debug: ignoring loglevel setting. DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e4000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007ffa0000 (usable) modified: 000000007ffa0000 - 000000007ffae000 (ACPI data) modified: 000000007ffae000 - 000000007ffe0000 (ACPI NVS) modified: 000000007ffe0000 - 0000000080000000 (reserved) modified: 00000000ffb80000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007ffa0000 0000000000 - 007ffa0000 page 4k kernel direct mapping tables up to 7ffa0000 @ 100000-503000 ACPI: RSDP 00000000000facd0 00024 (v02 ACPIAM) ACPI: XSDT 000000007ffa0100 00044 (v01 A M I OEMXSDT 10000630 MSFT 00000097) ACPI: FACP 000000007ffa0290 000F4 (v03 A M I OEMFACP 10000630 MSFT 00000097) ACPI: DSDT 000000007ffa0410 08318 (v01 A0227 A0227000 00000000 INTL 02002026) ACPI: FACS 000000007ffae000 00040 ACPI: APIC 000000007ffa0390 00080 (v01 A M I OEMAPIC 10000630 MSFT 00000097) ACPI: OEMB 000000007ffae040 00066 (v01 A M I AMI_OEM 10000630 MSFT 00000097) ACPI: MCFG 000000007ffa8730 0003C (v01 A M I OEMMCFG 10000630 MSFT 00000097) ACPI: Local APIC address 0xfee00000 (6 early reservations) ==> bootmem [0000000000 - 007ffa0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0002881080] TEXT DATA BSS ==> [0001000000 - 0002881080] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0002882000 - 000288227c] BRK ==> [0002882000 - 000288227c] #5 [0000100000 - 0000501000] PGTABLE ==> [0000100000 - 0000501000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002e00000-ffff8800049fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007ffa0 On node 0 totalpages: 524079 DMA zone: 56 pages used for memmap DMA zone: 1124 pages reserved DMA zone: 2803 pages, LIFO batch:0 DMA32 zone: 7111 pages used for memmap DMA32 zone: 512985 pages, LIFO batch:31 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information mapped APIC to ffffffffff5fc000 (fee00000) mapped IOAPIC to ffffffffff5fb000 (fec00000) nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000) Booting paravirtualized kernel on bare hardware Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515788 Kernel command line: root=/dev/sda3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled kernel profiling enabled (shift: 0) debug: sysrq always enabled. PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Memory: 2034728k/2096768k available (7661k kernel code, 452k absent, 61180k reserved, 6599k data, 812k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is enabled. NR_IRQS:288 Console: colour VGA+ 80x25 console [tty0] enabled, bootconsole disabled console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6335 kB per task-struct memory footprint: 2688 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | |failed| recursive read-lock #2: | ok | |failed| mixed read-write-lock: |failed| |failed| mixed write-read-lock: |failed| |failed| -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12:failed|failed| ok | soft-irqs-on + irq-safe-A/12:failed|failed| ok | hard-irqs-on + irq-safe-A/21:failed|failed| ok | soft-irqs-on + irq-safe-A/21:failed|failed| ok | sirq-safe-A => hirqs-on/12:failed|failed| ok | sirq-safe-A => hirqs-on/21:failed|failed| ok | hard-safe-A + irqs-on/12:failed|failed| ok | soft-safe-A + irqs-on/12:failed|failed| ok | hard-safe-A + irqs-on/21:failed|failed| ok | soft-safe-A + irqs-on/21:failed|failed| ok | hard-safe-A + unsafe-B #1/123:failed|failed| ok | soft-safe-A + unsafe-B #1/123:failed|failed| ok | hard-safe-A + unsafe-B #1/132:failed|failed| ok | soft-safe-A + unsafe-B #1/132:failed|failed| ok | hard-safe-A + unsafe-B #1/213:failed|failed| ok | soft-safe-A + unsafe-B #1/213:failed|failed| ok | hard-safe-A + unsafe-B #1/231:failed|failed| ok | soft-safe-A + unsafe-B #1/231:failed|failed| ok | hard-safe-A + unsafe-B #1/312:failed|failed| ok | soft-safe-A + unsafe-B #1/312:failed|failed| ok | hard-safe-A + unsafe-B #1/321:failed|failed| ok | soft-safe-A + unsafe-B #1/321:failed|failed| ok | hard-safe-A + unsafe-B #2/123:failed|failed| ok | soft-safe-A + unsafe-B #2/123:failed|failed| ok | hard-safe-A + unsafe-B #2/132:failed|failed| ok | soft-safe-A + unsafe-B #2/132:failed|failed| ok | hard-safe-A + unsafe-B #2/213:failed|failed| ok | soft-safe-A + unsafe-B #2/213:failed|failed| ok | hard-safe-A + unsafe-B #2/231:failed|failed| ok | soft-safe-A + unsafe-B #2/231:failed|failed| ok | hard-safe-A + unsafe-B #2/312:failed|failed| ok | soft-safe-A + unsafe-B #2/312:failed|failed| ok | hard-safe-A + unsafe-B #2/321:failed|failed| ok | soft-safe-A + unsafe-B #2/321:failed|failed| ok | hard-irq lock-inversion/123:failed|failed| ok | soft-irq lock-inversion/123:failed|failed| ok | hard-irq lock-inversion/132:failed|failed| ok | soft-irq lock-inversion/132:failed|failed| ok | hard-irq lock-inversion/213:failed|failed| ok | soft-irq lock-inversion/213:failed|failed| ok | hard-irq lock-inversion/231:failed|failed| ok | soft-irq lock-inversion/231:failed|failed| ok | hard-irq lock-inversion/312:failed|failed| ok | soft-irq lock-inversion/312:failed|failed| ok | hard-irq lock-inversion/321:failed|failed| ok | soft-irq lock-inversion/321:failed|failed| ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | -------------------------------------------------------- 133 out of 218 testcases failed, as expected. | ---------------------------------------------------- allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 3456.952 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6916.98 BogoMIPS (lpj=11523173) Security Framework initialized TOMOYO Linux initialized Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Performance Events: no PMU driver, software events only. CPU: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02 ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 32532 entries in 128 pages calling spawn_ksoftirqd+0x0/0x39 @ 1 initcall spawn_ksoftirqd+0x0/0x39 returned 0 after 0 usecs calling spawn_softlockup_task+0x0/0x55 @ 1 initcall spawn_softlockup_task+0x0/0x55 returned 0 after 0 usecs calling relay_init+0x0/0x8 @ 1 initcall relay_init+0x0/0x8 returned 0 after 0 usecs calling tracer_alloc_buffers+0x0/0x1a1 @ 1 initcall tracer_alloc_buffers+0x0/0x1a1 returned 0 after 0 usecs calling init_trace_printk+0x0/0x12 @ 1 initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs calling trace_workqueue_early_init+0x0/0xea @ 1 initcall trace_workqueue_early_init+0x0/0xea returned 0 after 0 usecs Setting APIC routing to flat enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs 2-0 (apicid-pin) not connected IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1440239 ..... delta 1440239 ..... mult: 61861827 ..... calibration result: 768127 ..... CPU clock speed is 3456.3059 MHz. ..... host bus clock speed is 230.1537 MHz. ... verify APIC timer ... jiffies delta = 30 ... jiffies result ok PM: Adding info for No Bus:platform khelper used greatest stack depth: 5808 bytes left calling init_mmap_min_addr+0x0/0x16 @ 1 initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs calling net_ns_init+0x0/0x153 @ 1 initcall net_ns_init+0x0/0x153 returned 0 after 0 usecs calling e820_mark_nvs_memory+0x0/0x40 @ 1 initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs calling pci_reboot_init+0x0/0x14 @ 1 initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs calling init_lapic_sysfs+0x0/0x2d @ 1 initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs calling ksysfs_init+0x0/0xc0 @ 1 initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs calling async_init+0x0/0x60 @ 1 initcall async_init+0x0/0x60 returned 0 after 0 usecs calling init_jiffies_clocksource+0x0/0x12 @ 1 initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs calling pm_init+0x0/0x34 @ 1 initcall pm_init+0x0/0x34 returned 0 after 0 usecs calling pm_disk_init+0x0/0x19 @ 1 initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs calling swsusp_header_init+0x0/0x31 @ 1 initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs calling init_zero_pfn+0x0/0x35 @ 1 initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs calling filelock_init+0x0/0x2e @ 1 initcall filelock_init+0x0/0x2e returned 0 after 0 usecs calling init_script_binfmt+0x0/0x14 @ 1 initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_elf_binfmt+0x0/0x14 @ 1 initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling init_compat_elf_binfmt+0x0/0x14 @ 1 initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs calling debugfs_init+0x0/0x5c @ 1 initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs calling securityfs_init+0x0/0x53 @ 1 initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs calling random32_init+0x0/0x6d @ 1 initcall random32_init+0x0/0x6d returned 0 after 0 usecs calling gnttab_init+0x0/0x196 @ 1 initcall gnttab_init+0x0/0x196 returned -19 after 0 usecs calling regulator_init+0x0/0x2e @ 1 regulator: core version 0.5 initcall regulator_init+0x0/0x2e returned 0 after 3255 usecs calling early_resume_init+0x0/0x18 @ 1 Time: 9:22:18 Date: 10/12/09 initcall early_resume_init+0x0/0x18 returned 0 after 3255 usecs calling cpuidle_init+0x0/0x20 @ 1 initcall cpuidle_init+0x0/0x20 returned 0 after 0 usecs calling virtio_init+0x0/0x2b @ 1 initcall virtio_init+0x0/0x2b returned 0 after 0 usecs calling sock_init+0x0/0x59 @ 1 initcall sock_init+0x0/0x59 returned 0 after 0 usecs calling netpoll_init+0x0/0x41 @ 1 initcall netpoll_init+0x0/0x41 returned 0 after 0 usecs calling netlink_proto_init+0x0/0x19e @ 1 NET: Registered protocol family 16 initcall netlink_proto_init+0x0/0x19e returned 0 after 3255 usecs calling bdi_class_init+0x0/0x41 @ 1 initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs calling kobject_uevent_init+0x0/0x54 @ 1 initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs calling pcibus_class_init+0x0/0x19 @ 1 initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_driver_init+0x0/0x12 @ 1 initcall pci_driver_init+0x0/0x12 returned 0 after 3255 usecs calling backlight_class_init+0x0/0x5d @ 1 initcall backlight_class_init+0x0/0x5d returned 0 after 3255 usecs calling xenbus_probe_init+0x0/0x107 @ 1 initcall xenbus_probe_init+0x0/0x107 returned -19 after 0 usecs calling tty_class_init+0x0/0x38 @ 1 initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs calling vtconsole_class_init+0x0/0xc2 @ 1 PM: Adding info for No Bus:vtcon0 initcall vtconsole_class_init+0x0/0xc2 returned 0 after 3255 usecs calling spi_init+0x0/0xd7 @ 1 initcall spi_init+0x0/0xd7 returned 0 after 0 usecs calling amd_postcore_init+0x0/0x3c @ 1 initcall amd_postcore_init+0x0/0x3c returned 0 after 0 usecs calling arch_kdebugfs_init+0x0/0x2d @ 1 initcall arch_kdebugfs_init+0x0/0x2d returned 0 after 0 usecs calling ffh_cstate_init+0x0/0x7e @ 1 initcall ffh_cstate_init+0x0/0x7e returned 0 after 0 usecs calling acpi_pci_init+0x0/0x57 @ 1 ACPI: bus type pci registered initcall acpi_pci_init+0x0/0x57 returned 0 after 3255 usecs calling dmi_id_init+0x0/0xfb @ 1 PM: Adding info for No Bus:id initcall dmi_id_init+0x0/0xfb returned 0 after 3255 usecs calling pci_arch_init+0x0/0x57 @ 1 PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access initcall pci_arch_init+0x0/0x57 returned 0 after 6510 usecs calling topology_init+0x0/0x16 @ 1 initcall topology_init+0x0/0x16 returned 0 after 0 usecs calling param_sysfs_init+0x0/0xe4 @ 1 khelper used greatest stack depth: 5464 bytes left initcall param_sysfs_init+0x0/0xe4 returned 0 after 136718 usecs calling pm_sysrq_init+0x0/0x1e @ 1 initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs calling audit_watch_init+0x0/0x2f @ 1 initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs calling init_slow_work+0x0/0x1b @ 1 initcall init_slow_work+0x0/0x1b returned 0 after 0 usecs calling default_bdi_init+0x0/0xc6 @ 1 PM: Adding info for No Bus:default initcall default_bdi_init+0x0/0xc6 returned 0 after 3255 usecs calling init_bio+0x0/0x128 @ 1 bio: create slab at 0 initcall init_bio+0x0/0x128 returned 0 after 3255 usecs calling fsnotify_init+0x0/0x12 @ 1 initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs calling fsnotify_notification_init+0x0/0x68 @ 1 initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs calling cryptomgr_init+0x0/0x12 @ 1 initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs calling blk_settings_init+0x0/0x2a @ 1 initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs calling blk_ioc_init+0x0/0x2a @ 1 initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs calling blk_softirq_init+0x0/0x2e @ 1 initcall blk_softirq_init+0x0/0x2e returned 0 after 0 usecs calling blk_iopoll_setup+0x0/0x2e @ 1 initcall blk_iopoll_setup+0x0/0x2e returned 0 after 0 usecs calling genhd_device_init+0x0/0x66 @ 1 initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs calling blk_dev_integrity_init+0x0/0x2a @ 1 initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs calling gpiolib_debugfs_init+0x0/0x24 @ 1 initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs calling pci_slot_init+0x0/0x4b @ 1 initcall pci_slot_init+0x0/0x4b returned 0 after 0 usecs calling acpi_init+0x0/0x134 @ 1 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: Using MMCONFIG at f0000000 - f3ffffff PM: Adding info for acpi:LNXSYSTM:00 PM: Adding info for acpi:LNXCPU:00 PM: Adding info for acpi:LNXCPU:01 PM: Adding info for acpi:LNXCPU:02 PM: Adding info for acpi:LNXCPU:03 PM: Adding info for acpi:LNXSYBUS:00 PM: Adding info for acpi:PNP0A08:00 PM: Adding info for acpi:PNP0C01:00 PM: Adding info for acpi:device:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:device:02 PM: Adding info for acpi:device:03 PM: Adding info for acpi:device:04 PM: Adding info for acpi:device:05 PM: Adding info for acpi:device:06 PM: Adding info for acpi:device:07 PM: Adding info for acpi:device:08 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:PNP0700:00 PM: Adding info for acpi:PNP0401:00 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:PNP0C02:01 PM: Adding info for acpi:ATK0110:00 PM: Adding info for acpi:PNP0C02:02 PM: Adding info for acpi:PNP0501:00 PM: Adding info for acpi:PNP0C02:03 PM: Adding info for acpi:device:09 PM: Adding info for acpi:device:0a PM: Adding info for acpi:device:0b PM: Adding info for acpi:device:0c PM: Adding info for acpi:device:0d PM: Adding info for acpi:device:0e PM: Adding info for acpi:device:0f PM: Adding info for acpi:device:10 PM: Adding info for acpi:device:11 PM: Adding info for acpi:device:12 PM: Adding info for acpi:device:13 PM: Adding info for acpi:device:14 PM: Adding info for acpi:device:15 PM: Adding info for acpi:device:16 PM: Adding info for acpi:PNP0C01:01 PM: Adding info for acpi:PNP0C0C:00 PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:LNXTHERM:00 PM: Adding info for acpi:LNXPWRBN:00 ACPI Warning: Incorrect checksum in table [OEMB] - 5F, should be 52 (20090903/tbutils-314) initcall acpi_init+0x0/0x134 returned 0 after 957029 usecs calling dock_init+0x0/0x8d @ 1 ACPI: No dock devices found. initcall dock_init+0x0/0x8d returned 0 after 3255 usecs calling acpi_pci_root_init+0x0/0x28 @ 1 ACPI: PCI Root Bridge [PCI0] (0000:00) PM: Adding info for No Bus:pci0000:00 PM: Adding info for No Bus:0000:00 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xd7cf8000-0xd7cfbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x7000-0x701f] pci 0000:00:1d.1: reg 20 io port: [0x7400-0x741f] pci 0000:00:1d.2: reg 20 io port: [0x7800-0x781f] pci 0000:00:1d.3: reg 20 io port: [0x8000-0x801f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd7cff800-0xd7cffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:1f.2: reg 10 io port: [0x9800-0x9807] pci 0000:00:1f.2: reg 14 io port: [0x9400-0x9403] pci 0000:00:1f.2: reg 18 io port: [0x9000-0x9007] pci 0000:00:1f.2: reg 1c io port: [0x8800-0x8803] pci 0000:00:1f.2: reg 20 io port: [0x8400-0x840f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd7cffc00-0xd7cfffff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:04:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:04:00.0: reg 14 io port: [0xe000-0xe0ff] pci 0000:04:00.0: reg 18 32bit mmio: [0xd7fe0000-0xd7feffff] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xd7fc0000-0xd7fdffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.1: reg 10 32bit mmio: [0xd7ff0000-0xd7ffffff] pci 0000:04:00.1: supports D1 D2 pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: bridge io port: [0xe000-0xefff] pci 0000:00:01.0: bridge 32bit mmio: [0xd7f00000-0xd7ffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] pci 0000:02:00.0: reg 10 64bit mmio: [0xd7efc000-0xd7efffff] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xd7ec0000-0xd7edffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.3: bridge 32bit mmio: [0xd7e00000-0xd7efffff] pci 0000:01:01.0: reg 10 32bit mmio: [0xd7ddf000-0xd7ddffff] pci 0000:01:01.0: reg 14 32bit mmio: [0xd7dde000-0xd7ddefff] pci 0000:01:01.0: supports D1 pci 0000:01:03.0: reg 10 io port: [0xb800-0xb807] pci 0000:01:03.0: reg 14 io port: [0xb400-0xb403] pci 0000:01:03.0: reg 18 io port: [0xb000-0xb007] pci 0000:01:03.0: reg 1c io port: [0xa800-0xa803] pci 0000:01:03.0: reg 20 io port: [0xa400-0xa40f] pci 0000:01:03.0: reg 30 32bit mmio pref: [0xd7de0000-0xd7dfffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff] pci 0000:00:1e.0: bridge 32bit mmio: [0xd7d00000-0xd7dfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:1b.0 PM: Adding info for pci:0000:00:1c.0 PM: Adding info for pci:0000:00:1c.3 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1d.1 PM: Adding info for pci:0000:00:1d.2 PM: Adding info for pci:0000:00:1d.3 PM: Adding info for pci:0000:00:1d.7 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.1 PM: Adding info for pci:0000:00:1f.2 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:04:00.0 PM: Adding info for pci:0000:04:00.1 PM: Adding info for No Bus:0000:04 PM: Adding info for No Bus:0000:03 PM: Adding info for pci:0000:02:00.0 PM: Adding info for No Bus:0000:02 PM: Adding info for pci:0000:01:01.0 Clocksource tsc unstable (delta = 115790085 ns) PM: Adding info for pci:0000:01:03.0 PM: Adding info for No Bus:0000:01 initcall acpi_pci_root_init+0x0/0x28 returned 0 after 475259 usecs calling acpi_pci_link_init+0x0/0x43 @ 1 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) initcall acpi_pci_link_init+0x0/0x43 returned 0 after 58593 usecs calling pnp_init+0x0/0x12 @ 1 initcall pnp_init+0x0/0x12 returned 0 after 0 usecs calling setup_shutdown_event+0x0/0x14 @ 1 initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs calling misc_init+0x0/0xb7 @ 1 initcall misc_init+0x0/0xb7 returned 0 after 0 usecs calling vga_arb_device_init+0x0/0x80 @ 1 PM: Adding info for No Bus:vga_arbiter vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded initcall vga_arb_device_init+0x0/0x80 returned 0 after 6510 usecs calling init_scsi+0x0/0x81 @ 1 SCSI subsystem initialized initcall init_scsi+0x0/0x81 returned 0 after 3255 usecs calling ata_init+0x0/0x8d @ 1 libata version 3.00 loaded. initcall ata_init+0x0/0x8d returned 0 after 3255 usecs calling phy_init+0x0/0x2e @ 1 initcall phy_init+0x0/0x2e returned 0 after 0 usecs calling init_pcmcia_cs+0x0/0x36 @ 1 initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs calling nop_usb_xceiv_init+0x0/0x12 @ 1 initcall nop_usb_xceiv_init+0x0/0x12 returned 0 after 0 usecs calling usb_init+0x0/0x1ad @ 1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb initcall usb_init+0x0/0x1ad returned 0 after 13020 usecs calling serio_init+0x0/0x86 @ 1 initcall serio_init+0x0/0x86 returned 0 after 0 usecs calling input_init+0x0/0xbd @ 1 khelper used greatest stack depth: 5224 bytes left initcall input_init+0x0/0xbd returned 0 after 3255 usecs calling init_dvbdev+0x0/0xd7 @ 1 initcall init_dvbdev+0x0/0xd7 returned 0 after 0 usecs calling power_supply_class_init+0x0/0x38 @ 1 initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs calling thermal_init+0x0/0x57 @ 1 initcall thermal_init+0x0/0x57 returned 0 after 0 usecs calling ac97_bus_init+0x0/0x12 @ 1 initcall ac97_bus_init+0x0/0x12 returned 0 after 0 usecs calling pci_subsys_init+0x0/0x107 @ 1 PCI: Using ACPI for IRQ routing initcall pci_subsys_init+0x0/0x107 returned 0 after 3255 usecs calling proto_init+0x0/0x12 @ 1 initcall proto_init+0x0/0x12 returned 0 after 0 usecs calling net_dev_init+0x0/0x15e @ 1 PM: Adding info for No Bus:lo initcall net_dev_init+0x0/0x15e returned 0 after 3255 usecs calling neigh_init+0x0/0x71 @ 1 initcall neigh_init+0x0/0x71 returned 0 after 0 usecs calling genl_init+0x0/0x8f @ 1 initcall genl_init+0x0/0x8f returned 0 after 0 usecs calling cipso_v4_init+0x0/0x88 @ 1 initcall cipso_v4_init+0x0/0x88 returned 0 after 0 usecs calling wanrouter_init+0x0/0x55 @ 1 Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. initcall wanrouter_init+0x0/0x55 returned 0 after 3255 usecs calling bt_init+0x0/0x5a @ 1 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized initcall bt_init+0x0/0x5a returned 0 after 9765 usecs calling wireless_nlevent_init+0x0/0x12 @ 1 initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs calling netlbl_init+0x0/0x81 @ 1 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default initcall netlbl_init+0x0/0x81 returned 0 after 13020 usecs calling rfkill_init+0x0/0x79 @ 1 PM: Adding info for No Bus:rfkill initcall rfkill_init+0x0/0x79 returned 0 after 3255 usecs calling wpan_phy_class_init+0x0/0x19 @ 1 initcall wpan_phy_class_init+0x0/0x19 returned 0 after 0 usecs calling pci_iommu_init+0x0/0x17 @ 1 initcall pci_iommu_init+0x0/0x17 returned 0 after 0 usecs calling print_all_ICs+0x0/0x4b @ 1 printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0c29 ... PIC ISR: 0000 ... PIC ELCR: 0e28 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00050014 ... APIC TASKPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000000000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 000c0630 ... APIC ICR2: ff000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00010000 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 0000bb87 ... APIC TMCCT: 000027f5 ... APIC TDCR: 00000003 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 001 0 0 0 0 0 1 1 31 02 001 0 0 0 0 0 1 1 30 03 001 0 0 0 0 0 1 1 33 04 001 0 0 0 0 0 1 1 34 05 001 0 0 0 0 0 1 1 35 06 001 0 0 0 0 0 1 1 36 07 001 0 0 0 0 0 1 1 37 08 001 0 0 0 0 0 1 1 38 09 001 0 1 0 0 0 1 1 39 0a 001 0 0 0 0 0 1 1 3A 0b 001 0 0 0 0 0 1 1 3B 0c 001 0 0 0 0 0 1 1 3C 0d 001 0 0 0 0 0 1 1 3D 0e 001 0 0 0 0 0 1 1 3E 0f 001 0 0 0 0 0 1 1 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. initcall print_all_ICs+0x0/0x4b returned 0 after 175780 usecs calling hpet_late_init+0x0/0x6b @ 1 hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter initcall hpet_late_init+0x0/0x6b returned 0 after 13020 usecs calling clocksource_done_booting+0x0/0x38 @ 1 Switching to clocksource hpet initcall clocksource_done_booting+0x0/0x38 returned 0 after 3258 usecs calling ftrace_init_debugfs+0x0/0xba @ 1 initcall ftrace_init_debugfs+0x0/0xba returned 0 after 167 usecs calling rb_init_debugfs+0x0/0x2f @ 1 initcall rb_init_debugfs+0x0/0x2f returned 0 after 18 usecs calling tracer_init_debugfs+0x0/0x24d @ 1 initcall tracer_init_debugfs+0x0/0x24d returned 0 after 774 usecs calling init_trace_printk_function_export+0x0/0x2f @ 1 initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 18 usecs calling stat_workqueue_init+0x0/0x2b @ 1 initcall stat_workqueue_init+0x0/0x2b returned 0 after 41 usecs calling event_trace_init+0x0/0x1f7 @ 1 initcall event_trace_init+0x0/0x1f7 returned 0 after 37202 usecs calling init_pipe_fs+0x0/0x4c @ 1 initcall init_pipe_fs+0x0/0x4c returned 0 after 162 usecs calling eventpoll_init+0x0/0xe3 @ 1 initcall eventpoll_init+0x0/0xe3 returned 0 after 27 usecs calling anon_inode_init+0x0/0x127 @ 1 initcall anon_inode_init+0x0/0x127 returned 0 after 73 usecs calling tomoyo_initerface_init+0x0/0x11b @ 1 initcall tomoyo_initerface_init+0x0/0x11b returned 0 after 263 usecs calling blk_scsi_ioctl_init+0x0/0x289 @ 1 initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs calling acpi_event_init+0x0/0x81 @ 1 initcall acpi_event_init+0x0/0x81 returned 0 after 108 usecs calling pnpacpi_init+0x0/0x8c @ 1 pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 ACPI: bus type pnp registered PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) PM: Adding info for pnp:00:05 IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) PM: Adding info for pnp:00:06 IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) PM: Adding info for pnp:00:0b PM: Adding info for pnp:00:0c PM: Adding info for pnp:00:0d pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered initcall pnpacpi_init+0x0/0x8c returned 0 after 157696 usecs calling pnp_system_init+0x0/0x12 @ 1 system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved system 00:08: ioport range 0x290-0x297 has been reserved system 00:09: ioport range 0x4d0-0x4d1 has been reserved system 00:09: ioport range 0x800-0x87f has been reserved system 00:09: ioport range 0x480-0x4bf has been reserved system 00:09: ioport range 0x900-0x91f has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:09: iomem range 0xfff00000-0xffffffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xdffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved initcall pnp_system_init+0x0/0x12 returned 0 after 95376 usecs calling chr_dev_init+0x0/0xc3 @ 1 PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg initcall chr_dev_init+0x0/0xc3 returned 0 after 30412 usecs calling firmware_class_init+0x0/0x79 @ 1 initcall firmware_class_init+0x0/0x79 returned 0 after 261 usecs calling ssb_modinit+0x0/0x49 @ 1 initcall ssb_modinit+0x0/0x49 returned 0 after 330 usecs calling pcibios_assign_resources+0x0/0x74 @ 1 pci 0000:01:03.0: BAR 6: address space collision on of device [0xd7de0000-0xd7dfffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04 pci 0000:00:01.0: IO window: 0xe000-0xefff pci 0000:00:01.0: MEM window: 0xd7f00000-0xd7ffffff pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.0: IO window: 0xd000-0xdfff pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.3: IO window: 0xc000-0xcfff pci 0000:00:1c.3: MEM window: 0xd7e00000-0xd7efffff pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0xa000-0xbfff pci 0000:00:1e.0: MEM window: 0xd7d00000-0xd7dfffff pci 0000:00:1e.0: PREFETCH window: 0x80400000-0x804fffff IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 IOAPIC[0]: Set routing entry (2-19 -> 0x51 -> IRQ 19 Mode:1 Active:1) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] pci_bus 0000:04: resource 1 mem: [0xd7f00000-0xd7ffffff] pci_bus 0000:04: resource 2 pref mem [0xd8000000-0xdfffffff] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] pci_bus 0000:03: resource 1 mem: [0x80000000-0x801fffff] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] pci_bus 0000:02: resource 1 mem: [0xd7e00000-0xd7efffff] pci_bus 0000:01: resource 0 io: [0xa000-0xbfff] pci_bus 0000:01: resource 1 mem: [0xd7d00000-0xd7dfffff] pci_bus 0000:01: resource 2 pref mem [0x80400000-0x804fffff] pci_bus 0000:01: resource 3 io: [0x00-0xffff] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] initcall pcibios_assign_resources+0x0/0x74 returned 0 after 201862 usecs calling inet_init+0x0/0x199 @ 1 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) IPv4 FIB: Using LC-trie version 0.409 TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 32768 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 262144 bind 32768) TCP reno registered initcall inet_init+0x0/0x199 returned 0 after 38666 usecs calling af_unix_init+0x0/0x55 @ 1 NET: Registered protocol family 1 initcall af_unix_init+0x0/0x55 returned 0 after 3138 usecs calling populate_rootfs+0x0/0x10f @ 1 initcall populate_rootfs+0x0/0x10f returned 0 after 422 usecs calling calgary_fixup_tce_spaces+0x0/0xf9 @ 1 initcall calgary_fixup_tce_spaces+0x0/0xf9 returned -19 after 0 usecs calling irqfd_module_init+0x0/0x35 @ 1 initcall irqfd_module_init+0x0/0x35 returned 0 after 168 usecs calling vmx_init+0x0/0x1fd @ 1 PM: Adding info for No Bus:kvm initcall vmx_init+0x0/0x1fd returned 0 after 4498 usecs calling i8259A_init_sysfs+0x0/0x22 @ 1 initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 499 usecs calling vsyscall_init+0x0/0xbd @ 1 initcall vsyscall_init+0x0/0xbd returned 0 after 1 usecs calling sbf_init+0x0/0xe9 @ 1 initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs calling i8237A_init_sysfs+0x0/0x22 @ 1 initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 601 usecs calling add_rtc_cmos+0x0/0xa9 @ 1 initcall add_rtc_cmos+0x0/0xa9 returned 0 after 3 usecs calling cache_sysfs_init+0x0/0x26 @ 1 initcall cache_sysfs_init+0x0/0x26 returned 0 after 911 usecs calling cpu_debug_init+0x0/0xa9 @ 1 cpu0(1) debug files 237 initcall cpu_debug_init+0x0/0xa9 returned 0 after 12677 usecs calling mce_init_device+0x0/0xc6 @ 1 PM: Adding info for No Bus:mcelog initcall mce_init_device+0x0/0xc6 returned 0 after 4075 usecs calling inject_init+0x0/0x32 @ 1 Machine check injector initialized initcall inject_init+0x0/0x32 returned 0 after 3183 usecs calling thermal_throttle_init_device+0x0/0x3e @ 1 initcall thermal_throttle_init_device+0x0/0x3e returned 0 after 38 usecs calling cpuid_init+0x0/0xdf @ 1 PM: Adding info for No Bus:cpu0 initcall cpuid_init+0x0/0xdf returned 0 after 3619 usecs calling ioapic_init_sysfs+0x0/0xb3 @ 1 initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 506 usecs calling microcode_init+0x0/0xfe @ 1 PM: Adding info for platform:microcode microcode: CPU0 sig=0xf62, pf=0x4, revision=0xf PM: Adding info for No Bus:microcode Microcode Update Driver: v2.00 , Peter Oruba initcall microcode_init+0x0/0xfe returned 0 after 18589 usecs calling start_periodic_check_for_corruption+0x0/0x3c @ 1 Scanning for low memory corruption every 60 seconds initcall start_periodic_check_for_corruption+0x0/0x3c returned 0 after 4624 usecs calling audit_classes_init+0x0/0xaf @ 1 initcall audit_classes_init+0x0/0xaf returned 0 after 88 usecs calling start_pageattr_test+0x0/0x47 @ 1 initcall start_pageattr_test+0x0/0x47 returned 0 after 71 usecs calling crypto_fpu_module_init+0x0/0x12 @ 1 initcall crypto_fpu_module_init+0x0/0x12 returned 0 after 40 usecs calling aes_init+0x0/0x12 @ 1 initcall aes_init+0x0/0x12 returned 0 after 199 usecs calling aesni_init+0x0/0x142 @ 1 Intel AES-NI instructions are not detected. initcall aesni_init+0x0/0x142 returned -19 after 3944 usecs calling init_vdso_vars+0x0/0x210 @ 1 initcall init_vdso_vars+0x0/0x210 returned 0 after 53 usecs calling sysenter_setup+0x0/0xaf @ 1 initcall sysenter_setup+0x0/0xaf returned 0 after 7 usecs calling init_sched_debug_procfs+0x0/0x2c @ 1 initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 26 usecs calling proc_schedstat_init+0x0/0x22 @ 1 initcall proc_schedstat_init+0x0/0x22 returned 0 after 18 usecs calling proc_execdomains_init+0x0/0x22 @ 1 initcall proc_execdomains_init+0x0/0x22 returned 0 after 17 usecs calling ioresources_init+0x0/0x3c @ 1 initcall ioresources_init+0x0/0x3c returned 0 after 32 usecs calling uid_cache_init+0x0/0x8a @ 1 initcall uid_cache_init+0x0/0x8a returned 0 after 18 usecs calling init_posix_timers+0x0/0x17a @ 1 initcall init_posix_timers+0x0/0x17a returned 0 after 12 usecs calling init_posix_cpu_timers+0x0/0xe5 @ 1 initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs calling nsproxy_cache_init+0x0/0x2d @ 1 initcall nsproxy_cache_init+0x0/0x2d returned 0 after 3 usecs calling create_proc_profile+0x0/0x4b @ 1 initcall create_proc_profile+0x0/0x4b returned 0 after 18 usecs calling timekeeping_init_device+0x0/0x22 @ 1 initcall timekeeping_init_device+0x0/0x22 returned 0 after 472 usecs calling init_clocksource_sysfs+0x0/0x50 @ 1 initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 573 usecs calling init_timer_list_procfs+0x0/0x2c @ 1 initcall init_timer_list_procfs+0x0/0x2c returned 0 after 33 usecs calling lockdep_proc_init+0x0/0x5f @ 1 initcall lockdep_proc_init+0x0/0x5f returned 0 after 48 usecs calling futex_init+0x0/0x7d @ 1 initcall futex_init+0x0/0x7d returned 0 after 6 usecs calling init_rttest+0x0/0x155 @ 1 Initializing RT-Tester: OK initcall init_rttest+0x0/0x155 returned 0 after 5544 usecs calling proc_dma_init+0x0/0x22 @ 1 initcall proc_dma_init+0x0/0x22 returned 0 after 39 usecs calling proc_modules_init+0x0/0x22 @ 1 initcall proc_modules_init+0x0/0x22 returned 0 after 18 usecs calling kallsyms_init+0x0/0x25 @ 1 initcall kallsyms_init+0x0/0x25 returned 0 after 18 usecs calling snapshot_device_init+0x0/0x12 @ 1 PM: Adding info for No Bus:snapshot initcall snapshot_device_init+0x0/0x12 returned 0 after 3632 usecs calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1 initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 28 usecs calling crash_notes_memory_init+0x0/0x88 @ 1 initcall crash_notes_memory_init+0x0/0x88 returned 0 after 23 usecs calling backtrace_regression_test+0x0/0x105 @ 1 ====[ backtrace testing ]=========== Testing a backtrace from process context. The following trace is a kernel self test and not a bug! Pid: 1, comm: swapper Not tainted 2.6.32-rc4 #1 Call Trace: [] ? backtrace_regression_test+0x0/0x105 [] backtrace_regression_test+0x3d/0x105 [] ? printk+0x41/0x43 [] ? ktime_get+0x65/0xbb [] ? backtrace_regression_test+0x0/0x105 [] ? backtrace_regression_test+0x0/0x105 [] do_one_initcall+0x5c/0x15b [] do_basic_setup+0x4f/0x61 [] kernel_init+0x5d/0xa0 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] child_rip+0xa/0x20 [] ? T.1296+0x0/0xd5 [] ? restore_args+0x0/0x30 [] ? kernel_init+0x0/0xa0 [] ? child_rip+0x0/0x20 Testing a backtrace from irq context. The following trace is a kernel self test and not a bug! Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.32-rc4 #1 Call Trace: [] backtrace_test_irq_callback+0xe/0x1c [] tasklet_action+0x63/0xaa [] __do_softirq+0xe0/0x1b4 [] call_softirq+0x1a/0x30 [] do_softirq+0x49/0xa4 [] ksoftirqd+0x4c/0xc9 [] ? ksoftirqd+0x0/0xc9 [] kthread+0x7e/0x86 [] child_rip+0xa/0x20 [] ? T.1296+0x0/0xd5 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x86 [] ? child_rip+0x0/0x20 Testing a saved backtrace. The following trace is a kernel self test and not a bug! [] save_stack_trace+0x2e/0x4b [] backtrace_regression_test+0xe1/0x105 [] do_one_initcall+0x5c/0x15b [] do_basic_setup+0x4f/0x61 [] kernel_init+0x5d/0xa0 [] child_rip+0xa/0x20 [] 0xffffffffffffffff ====[ end of backtrace testing ]==== initcall backtrace_regression_test+0x0/0x105 returned 0 after 191206 usecs calling audit_init+0x0/0x153 @ 1 audit: initializing netlink socket (disabled) type=2000 audit(1255339340.578:1): initialized initcall audit_init+0x0/0x153 returned 0 after 8401 usecs calling audit_tree_init+0x0/0x49 @ 1 initcall audit_tree_init+0x0/0x49 returned 0 after 10 usecs calling hung_task_init+0x0/0x53 @ 1 initcall hung_task_init+0x0/0x53 returned 0 after 65 usecs calling rcuclassic_trace_init+0x0/0xf8 @ 1 initcall rcuclassic_trace_init+0x0/0xf8 returned 0 after 121 usecs calling init_tracepoints+0x0/0x17 @ 1 initcall init_tracepoints+0x0/0x17 returned 0 after 1 usecs calling init_lstats_procfs+0x0/0x25 @ 1 initcall init_lstats_procfs+0x0/0x25 returned 0 after 19 usecs calling ftrace_mod_cmd_init+0x0/0x12 @ 1 initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 11 usecs calling init_events+0x0/0x64 @ 1 initcall init_events+0x0/0x64 returned 0 after 13 usecs calling init_sched_switch_trace+0x0/0x12 @ 1 initcall init_sched_switch_trace+0x0/0x12 returned 0 after 4 usecs calling init_stack_trace+0x0/0x12 @ 1 initcall init_stack_trace+0x0/0x12 returned 0 after 2 usecs calling init_function_trace+0x0/0x3e @ 1 initcall init_function_trace+0x0/0x3e returned 0 after 3 usecs calling init_irqsoff_tracer+0x0/0x14 @ 1 initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 2 usecs calling init_wakeup_tracer+0x0/0x22 @ 1 initcall init_wakeup_tracer+0x0/0x22 returned 0 after 3 usecs calling stack_trace_init+0x0/0x6b @ 1 initcall stack_trace_init+0x0/0x6b returned 0 after 52 usecs calling init_blk_tracer+0x0/0x55 @ 1 initcall init_blk_tracer+0x0/0x55 returned 0 after 4 usecs calling perf_event_sysfs_init+0x0/0x19 @ 1 initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 30 usecs calling init_per_zone_wmark_min+0x0/0x67 @ 1 initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 149 usecs calling kswapd_init+0x0/0x14 @ 1 initcall kswapd_init+0x0/0x14 returned 0 after 73 usecs calling setup_vmstat+0x0/0x7c @ 1 initcall setup_vmstat+0x0/0x7c returned 0 after 80 usecs calling mm_sysfs_init+0x0/0x29 @ 1 initcall mm_sysfs_init+0x0/0x29 returned 0 after 29 usecs calling proc_vmalloc_init+0x0/0x25 @ 1 initcall proc_vmalloc_init+0x0/0x25 returned 0 after 18 usecs calling procswaps_init+0x0/0x22 @ 1 initcall procswaps_init+0x0/0x22 returned 0 after 18 usecs calling pfn_inject_init+0x0/0x64 @ 1 initcall pfn_inject_init+0x0/0x64 returned 0 after 34 usecs calling fasync_init+0x0/0x2a @ 1 initcall fasync_init+0x0/0x2a returned 0 after 5 usecs calling proc_filesystems_init+0x0/0x22 @ 1 initcall proc_filesystems_init+0x0/0x22 returned 0 after 19 usecs calling dnotify_init+0x0/0x80 @ 1 initcall dnotify_init+0x0/0x80 returned 0 after 22 usecs calling inotify_setup+0x0/0x12 @ 1 initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs calling inotify_user_setup+0x0/0xbe @ 1 initcall inotify_user_setup+0x0/0xbe returned 0 after 82 usecs calling aio_setup+0x0/0xa5 @ 1 initcall aio_setup+0x0/0xa5 returned 0 after 91 usecs calling proc_locks_init+0x0/0x22 @ 1 initcall proc_locks_init+0x0/0x22 returned 0 after 21 usecs calling init_sys32_ioctl+0x0/0x83 @ 1 initcall init_sys32_ioctl+0x0/0x83 returned 0 after 18 usecs calling init_mbcache+0x0/0x14 @ 1 initcall init_mbcache+0x0/0x14 returned 0 after 3 usecs calling proc_cmdline_init+0x0/0x22 @ 1 initcall proc_cmdline_init+0x0/0x22 returned 0 after 19 usecs calling proc_cpuinfo_init+0x0/0x22 @ 1 initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 19 usecs calling proc_devices_init+0x0/0x22 @ 1 initcall proc_devices_init+0x0/0x22 returned 0 after 19 usecs calling proc_interrupts_init+0x0/0x22 @ 1 initcall proc_interrupts_init+0x0/0x22 returned 0 after 18 usecs calling proc_loadavg_init+0x0/0x22 @ 1 initcall proc_loadavg_init+0x0/0x22 returned 0 after 18 usecs calling proc_meminfo_init+0x0/0x22 @ 1 initcall proc_meminfo_init+0x0/0x22 returned 0 after 18 usecs calling proc_stat_init+0x0/0x22 @ 1 initcall proc_stat_init+0x0/0x22 returned 0 after 21 usecs calling proc_uptime_init+0x0/0x22 @ 1 initcall proc_uptime_init+0x0/0x22 returned 0 after 19 usecs calling proc_version_init+0x0/0x22 @ 1 initcall proc_version_init+0x0/0x22 returned 0 after 18 usecs calling proc_softirqs_init+0x0/0x22 @ 1 initcall proc_softirqs_init+0x0/0x22 returned 0 after 18 usecs calling proc_kmsg_init+0x0/0x25 @ 1 initcall proc_kmsg_init+0x0/0x25 returned 0 after 19 usecs calling configfs_init+0x0/0xb3 @ 1 initcall configfs_init+0x0/0xb3 returned 0 after 32 usecs calling init_devpts_fs+0x0/0x4c @ 1 initcall init_devpts_fs+0x0/0x4c returned 0 after 100 usecs calling init_ext3_fs+0x0/0x71 @ 1 initcall init_ext3_fs+0x0/0x71 returned 0 after 47 usecs calling init_ext4_fs+0x0/0xe9 @ 1 initcall init_ext4_fs+0x0/0xe9 returned 0 after 99 usecs calling journal_init+0x0/0x1e @ 1 initcall journal_init+0x0/0x1e returned 0 after 36 usecs calling journal_init+0x0/0x73 @ 1 initcall journal_init+0x0/0x73 returned 0 after 58 usecs calling init_cramfs_fs+0x0/0x2e @ 1 initcall init_cramfs_fs+0x0/0x2e returned 0 after 54 usecs calling init_ramfs_fs+0x0/0x12 @ 1 initcall init_ramfs_fs+0x0/0x12 returned 0 after 2 usecs calling init_fat_fs+0x0/0x4f @ 1 initcall init_fat_fs+0x0/0x4f returned 0 after 14 usecs calling init_vfat_fs+0x0/0x12 @ 1 initcall init_vfat_fs+0x0/0x12 returned 0 after 2 usecs calling init_msdos_fs+0x0/0x12 @ 1 initcall init_msdos_fs+0x0/0x12 returned 0 after 2 usecs calling init_hfsplus_fs+0x0/0x5f @ 1 initcall init_hfsplus_fs+0x0/0x5f returned 0 after 10 usecs calling ecryptfs_init+0x0/0x1d5 @ 1 PM: Adding info for No Bus:ecryptfs initcall ecryptfs_init+0x0/0x1d5 returned 0 after 3849 usecs calling init_nls_cp850+0x0/0x12 @ 1 initcall init_nls_cp850+0x0/0x12 returned 0 after 9 usecs calling init_nls_cp852+0x0/0x12 @ 1 initcall init_nls_cp852+0x0/0x12 returned 0 after 0 usecs calling init_nls_cp855+0x0/0x12 @ 1 initcall init_nls_cp855+0x0/0x12 returned 0 after 0 usecs calling init_nls_cp860+0x0/0x12 @ 1 initcall init_nls_cp860+0x0/0x12 returned 0 after 0 usecs calling init_nls_cp864+0x0/0x12 @ 1 initcall init_nls_cp864+0x0/0x12 returned 0 after 0 usecs calling init_nls_ascii+0x0/0x12 @ 1 initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs calling init_nls_iso8859_1+0x0/0x12 @ 1 initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs calling init_nls_iso8859_5+0x0/0x12 @ 1 initcall init_nls_iso8859_5+0x0/0x12 returned 0 after 1 usecs calling init_nls_cp1255+0x0/0x12 @ 1 initcall init_nls_cp1255+0x0/0x12 returned 0 after 0 usecs calling init_nls_iso8859_14+0x0/0x12 @ 1 initcall init_nls_iso8859_14+0x0/0x12 returned 0 after 1 usecs calling init_nls_koi8_u+0x0/0x12 @ 1 initcall init_nls_koi8_u+0x0/0x12 returned 0 after 1 usecs calling init_nls_koi8_ru+0x0/0x48 @ 1 initcall init_nls_koi8_ru+0x0/0x48 returned 0 after 1 usecs calling init_nls_utf8+0x0/0x29 @ 1 initcall init_nls_utf8+0x0/0x29 returned 0 after 1 usecs calling init_efs_fs+0x0/0x71 @ 1 EFS: 1.0a - http://aeschi.ch.eu.org/efs/ initcall init_efs_fs+0x0/0x71 returned 0 after 3718 usecs calling init_affs_fs+0x0/0x63 @ 1 initcall init_affs_fs+0x0/0x63 returned 0 after 10 usecs calling init_adfs_fs+0x0/0x63 @ 1 initcall init_adfs_fs+0x0/0x63 returned 0 after 10 usecs calling init_befs_fs+0x0/0x7f @ 1 BeFS version: 0.9.3 initcall init_befs_fs+0x0/0x7f returned 0 after 1921 usecs calling ipc_init+0x0/0x23 @ 1 msgmni has been set to 3974 initcall ipc_init+0x0/0x23 returned 0 after 2665 usecs calling init_mqueue_fs+0x0/0xc7 @ 1 initcall init_mqueue_fs+0x0/0xc7 returned 0 after 119 usecs calling key_proc_init+0x0/0x59 @ 1 initcall key_proc_init+0x0/0x59 returned 0 after 34 usecs calling crypto_wq_init+0x0/0x32 @ 1 initcall crypto_wq_init+0x0/0x32 returned 0 after 80 usecs calling crypto_algapi_init+0x0/0xd @ 1 initcall crypto_algapi_init+0x0/0xd returned 0 after 22 usecs calling skcipher_module_init+0x0/0x13 @ 1 initcall skcipher_module_init+0x0/0x13 returned 0 after 0 usecs calling chainiv_module_init+0x0/0x12 @ 1 initcall chainiv_module_init+0x0/0x12 returned 0 after 5 usecs calling eseqiv_module_init+0x0/0x12 @ 1 initcall eseqiv_module_init+0x0/0x12 returned 0 after 4 usecs calling seqiv_module_init+0x0/0x12 @ 1 initcall seqiv_module_init+0x0/0x12 returned 0 after 4 usecs calling hmac_module_init+0x0/0x12 @ 1 initcall hmac_module_init+0x0/0x12 returned 0 after 4 usecs calling md5_mod_init+0x0/0x12 @ 1 initcall md5_mod_init+0x0/0x12 returned 0 after 185 usecs calling rmd320_mod_init+0x0/0x12 @ 1 initcall rmd320_mod_init+0x0/0x12 returned 0 after 196 usecs calling sha1_generic_mod_init+0x0/0x12 @ 1 initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 183 usecs calling sha256_generic_mod_init+0x0/0x3f @ 1 initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 361 usecs calling sha512_generic_mod_init+0x0/0x3f @ 1 initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 429 usecs calling wp512_mod_init+0x0/0x64 @ 1 initcall wp512_mod_init+0x0/0x64 returned 0 after 610 usecs calling tgr192_mod_init+0x0/0x65 @ 1 initcall tgr192_mod_init+0x0/0x65 returned 0 after 536 usecs calling crypto_ecb_module_init+0x0/0x12 @ 1 initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 20 usecs calling crypto_cbc_module_init+0x0/0x12 @ 1 initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 4 usecs calling crypto_pcbc_module_init+0x0/0x12 @ 1 initcall crypto_pcbc_module_init+0x0/0x12 returned 0 after 4 usecs calling crypto_cts_module_init+0x0/0x12 @ 1 initcall crypto_cts_module_init+0x0/0x12 returned 0 after 4 usecs calling crypto_ctr_module_init+0x0/0x3e @ 1 initcall crypto_ctr_module_init+0x0/0x3e returned 0 after 6 usecs calling crypto_gcm_module_init+0x0/0xe3 @ 1 initcall crypto_gcm_module_init+0x0/0xe3 returned 0 after 14 usecs calling crypto_ccm_module_init+0x0/0x60 @ 1 initcall crypto_ccm_module_init+0x0/0x60 returned 0 after 9 usecs calling cryptd_init+0x0/0x2e @ 1 initcall cryptd_init+0x0/0x2e returned 0 after 9 usecs calling fcrypt_mod_init+0x0/0x12 @ 1 alg: No test for fcrypt (fcrypt-generic) initcall fcrypt_mod_init+0x0/0x12 returned 0 after 3789 usecs calling blowfish_mod_init+0x0/0x12 @ 1 initcall blowfish_mod_init+0x0/0x12 returned 0 after 663 usecs calling aes_init+0x0/0x12 @ 1 initcall aes_init+0x0/0x12 returned 0 after 229 usecs calling camellia_init+0x0/0x12 @ 1 initcall camellia_init+0x0/0x12 returned 0 after 243 usecs calling arc4_init+0x0/0x12 @ 1 initcall arc4_init+0x0/0x12 returned 0 after 191 usecs calling tea_mod_init+0x0/0x64 @ 1 initcall tea_mod_init+0x0/0x64 returned 0 after 687 usecs calling seed_init+0x0/0x12 @ 1 initcall seed_init+0x0/0x12 returned 0 after 209 usecs calling salsa20_generic_mod_init+0x0/0x12 @ 1 initcall salsa20_generic_mod_init+0x0/0x12 returned 0 after 116 usecs calling deflate_mod_init+0x0/0x12 @ 1 initcall deflate_mod_init+0x0/0x12 returned 0 after 657 usecs calling crc32c_mod_init+0x0/0x12 @ 1 initcall crc32c_mod_init+0x0/0x12 returned 0 after 322 usecs calling crypto_authenc_module_init+0x0/0x12 @ 1 initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 21 usecs calling krng_mod_init+0x0/0x12 @ 1 alg: No test for stdrng (krng) initcall krng_mod_init+0x0/0x12 returned 0 after 2968 usecs calling ghash_mod_init+0x0/0x12 @ 1 alg: No test for ghash (ghash-generic) initcall ghash_mod_init+0x0/0x12 returned 0 after 3654 usecs calling proc_genhd_init+0x0/0x3c @ 1 initcall proc_genhd_init+0x0/0x3c returned 0 after 54 usecs calling noop_init+0x0/0x14 @ 1 io scheduler noop registered initcall noop_init+0x0/0x14 returned 0 after 2684 usecs calling as_init+0x0/0x14 @ 1 io scheduler anticipatory registered (default) initcall as_init+0x0/0x14 returned 0 after 4197 usecs calling deadline_init+0x0/0x14 @ 1 io scheduler deadline registered initcall deadline_init+0x0/0x14 returned 0 after 3014 usecs calling dynamic_debug_init+0x0/0x12c @ 1 initcall dynamic_debug_init+0x0/0x12c returned 0 after 1011 usecs calling pci_init+0x0/0x3a @ 1 pci 0000:04:00.0: Boot video device initcall pci_init+0x0/0x3a returned 0 after 3605 usecs calling pci_proc_init+0x0/0x6a @ 1 initcall pci_proc_init+0x0/0x6a returned 0 after 627 usecs calling pcie_portdrv_init+0x0/0x4c @ 1 pcieport-driver 0000:00:01.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:01.0:pcie01 PM: Adding info for pci_express:0000:00:01.0:pcie08 pcieport-driver 0000:00:1c.0: setting latency timer to 64 PM: Adding info for pci_express:0000:00:1c.0:pcie01 PM: Adding info for pci_express:0000:00:1c.0:pcie04 PM: Adding info for pci_express:0000:00:1c.0:pcie08 pcieport-driver 0000:00:1c.3: setting latency timer to 64 PM: Adding info for pci_express:0000:00:1c.3:pcie01 PM: Adding info for pci_express:0000:00:1c.3:pcie08 initcall pcie_portdrv_init+0x0/0x4c returned 0 after 51719 usecs calling aer_service_init+0x0/0xb @ 1 initcall aer_service_init+0x0/0xb returned -6 after 0 usecs initcall aer_service_init+0x0/0xb returned with error code -6 calling aer_inject_init+0x0/0x12 @ 1 PM: Adding info for No Bus:aer_inject initcall aer_inject_init+0x0/0x12 returned 0 after 3854 usecs calling genericbl_init+0x0/0x12 @ 1 initcall genericbl_init+0x0/0x12 returned 0 after 276 usecs calling progearbl_init+0x0/0x55 @ 1 PM: Adding info for platform:progear-bl ALI M7101 PMU not found. initcall progearbl_init+0x0/0x55 returned 0 after 6756 usecs calling display_class_init+0x0/0x7e @ 1 initcall display_class_init+0x0/0x7e returned 0 after 279 usecs calling acpi_reserve_resources+0x0/0xeb @ 1 initcall acpi_reserve_resources+0x0/0xeb returned 0 after 44 usecs calling irqrouter_init_sysfs+0x0/0x38 @ 1 initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 455 usecs calling acpi_button_init+0x0/0x56 @ 1 PM: Adding info for No Bus:input0 input: Power Button as /class/input/input0 ACPI: Power Button [PWRB] PM: Adding info for No Bus:input1 input: Power Button as /class/input/input1 ACPI: Power Button [PWRF] initcall acpi_button_init+0x0/0x56 returned 0 after 20714 usecs calling acpi_fan_init+0x0/0x56 @ 1 initcall acpi_fan_init+0x0/0x56 returned 0 after 315 usecs calling acpi_smb_hc_init+0x0/0x18 @ 1 initcall acpi_smb_hc_init+0x0/0x18 returned 0 after 345 usecs calling acpi_sbs_init+0x0/0x4f @ 1 initcall acpi_sbs_init+0x0/0x4f returned 0 after 341 usecs calling xenfs_init+0x0/0x2d @ 1 XENFS: not registering filesystem on non-xen platform initcall xenfs_init+0x0/0x2d returned 0 after 4788 usecs calling hypervisor_subsys_init+0x0/0x25 @ 1 initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs calling hyper_sysfs_init+0x0/0xfb @ 1 initcall hyper_sysfs_init+0x0/0xfb returned -19 after 0 usecs calling regulator_virtual_consumer_init+0x0/0x12 @ 1 initcall regulator_virtual_consumer_init+0x0/0x12 returned 0 after 276 usecs calling rand_initialize+0x0/0x31 @ 1 initcall rand_initialize+0x0/0x31 returned 0 after 28 usecs calling tty_init+0x0/0xf5 @ 1 PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 initcall tty_init+0x0/0xf5 returned 0 after 238267 usecs calling pty_init+0x0/0xd @ 1 PM: Adding info for No Bus:ptmx initcall pty_init+0x0/0xd returned 0 after 3386 usecs calling sysrq_init+0x0/0x25 @ 1 initcall sysrq_init+0x0/0x25 returned 0 after 42 usecs calling xen_init+0x0/0x93 @ 1 initcall xen_init+0x0/0x93 returned -19 after 0 usecs calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 254 usecs calling raw_init+0x0/0xe5 @ 1 PM: Adding info for No Bus:rawctl initcall raw_init+0x0/0xe5 returned 0 after 3749 usecs calling applicom_init+0x0/0x4c8 @ 1 Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ ac.o: No PCI boards found. ac.o: For an ISA board you must supply memory and irq parameters. initcall applicom_init+0x0/0x4c8 returned -6 after 16570 usecs initcall applicom_init+0x0/0x4c8 returned with error code -6 calling hpet_init+0x0/0x6a @ 1 PM: Adding info for No Bus:hpet initcall hpet_init+0x0/0x6a returned 0 after 3587 usecs calling mwave_init+0x0/0x1dd @ 1 smapi::smapi_init, ERROR invalid usSmapiID mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine mwave: mwavedd::mwave_init: Error: Failed to initialize board data mwave: mwavedd::mwave_init: Error: Failed to initialize initcall mwave_init+0x0/0x1dd returned -5 after 22723 usecs initcall mwave_init+0x0/0x1dd returned with error code -5 calling ipmi_init_msghandler_mod+0x0/0xd @ 1 ipmi message handler version 39.2 initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 3484 usecs calling hangcheck_init+0x0/0x9b @ 1 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). initcall hangcheck_init+0x0/0x9b returned 0 after 10503 usecs calling init_tis+0x0/0x8e @ 1 initcall init_tis+0x0/0x8e returned 0 after 279 usecs calling init_atmel+0x0/0x182 @ 1 initcall init_atmel+0x0/0x182 returned -19 after 595 usecs calling serial8250_init+0x0/0x143 @ 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled PM: Adding info for platform:serial8250 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:ttyS1 PM: Adding info for No Bus:ttyS2 PM: Adding info for No Bus:ttyS3 initcall serial8250_init+0x0/0x143 returned 0 after 28157 usecs calling serial8250_pnp_init+0x0/0x12 @ 1 PM: Removing info for No Bus:ttyS0 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PM: Adding info for No Bus:ttyS0 initcall serial8250_pnp_init+0x0/0x12 returned 0 after 12094 usecs calling serial8250_pci_init+0x0/0x1b @ 1 initcall serial8250_pci_init+0x0/0x1b returned 0 after 330 usecs calling jsm_init_module+0x0/0x45 @ 1 initcall jsm_init_module+0x0/0x45 returned 0 after 389 usecs calling floppy_init+0x0/0x5c4 @ 1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PM: Adding info for platform:floppy.0 PM: Adding info for No Bus:fd0 PM: Adding info for No Bus:2:0 initcall floppy_init+0x0/0x5c4 returned 0 after 34334 usecs calling cpqarray_init+0x0/0x6b @ 1 Compaq SMART2 Driver (v 2.6.0) initcall cpqarray_init+0x0/0x6b returned -19 after 3496 usecs calling cciss_init+0x0/0x9e @ 1 HP CISS Driver (v 3.6.20) initcall cciss_init+0x0/0x9e returned 0 after 3123 usecs calling DAC960_init_module+0x0/0x4d @ 1 PM: Adding info for No Bus:dac960_gam initcall DAC960_init_module+0x0/0x4d returned 0 after 4192 usecs calling ub_init+0x0/0x8e @ 1 usbcore: registered new interface driver ub initcall ub_init+0x0/0x8e returned 0 after 4329 usecs calling xlblk_init+0x0/0x7a @ 1 initcall xlblk_init+0x0/0x7a returned -19 after 0 usecs calling ibmasm_init+0x0/0x64 @ 1 ibmasm: IBM ASM Service Processor Driver version 1.0 loaded initcall ibmasm_init+0x0/0x64 returned 0 after 5703 usecs calling phantom_init+0x0/0x10b @ 1 Phantom Linux Driver, version n0.9.8, init OK initcall phantom_init+0x0/0x10b returned 0 after 4737 usecs calling enclosure_init+0x0/0x19 @ 1 initcall enclosure_init+0x0/0x19 returned 0 after 247 usecs calling init_kgdbts+0x0/0x16 @ 1 initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs calling ilo_init+0x0/0x95 @ 1 initcall ilo_init+0x0/0x95 returned 0 after 625 usecs calling mac_hid_init+0x0/0xb @ 1 PM: Adding info for No Bus:input2 input: Macintosh mouse button emulation as /class/input/input2 initcall mac_hid_init+0x0/0xb returned 0 after 9274 usecs calling scsi_tgt_init+0x0/0x86 @ 1 PM: Adding info for No Bus:tgt initcall scsi_tgt_init+0x0/0x86 returned 0 after 3404 usecs calling raid_init+0x0/0x12 @ 1 initcall raid_init+0x0/0x12 returned 0 after 259 usecs calling spi_transport_init+0x0/0x79 @ 1 initcall spi_transport_init+0x0/0x79 returned 0 after 553 usecs calling fc_transport_init+0x0/0x4c @ 1 initcall fc_transport_init+0x0/0x4c returned 0 after 1026 usecs calling iscsi_transport_init+0x0/0x14f @ 1 Loading iSCSI transport class v2.0-870. initcall iscsi_transport_init+0x0/0x14f returned 0 after 5164 usecs calling sas_transport_init+0x0/0xcc @ 1 initcall sas_transport_init+0x0/0xcc returned 0 after 1494 usecs calling sas_class_init+0x0/0x31 @ 1 initcall sas_class_init+0x0/0x31 returned 0 after 22 usecs calling scsi_dh_init+0x0/0x3f @ 1 initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs calling libfc_init+0x0/0x73 @ 1 initcall libfc_init+0x0/0x73 returned 0 after 88 usecs calling fnic_init_module+0x0/0x1e9 @ 1 fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121 initcall fnic_init_module+0x0/0x1e9 returned 0 after 4429 usecs calling iscsi_sw_tcp_init+0x0/0x42 @ 1 PM: Adding info for No Bus:tcp iscsi: registered transport (tcp) initcall iscsi_sw_tcp_init+0x0/0x42 returned 0 after 6390 usecs calling BusLogic_init+0x0/0x5df @ 1 initcall BusLogic_init+0x0/0x5df returned 0 after 178 usecs calling arcmsr_module_init+0x0/0x20 @ 1 initcall arcmsr_module_init+0x0/0x20 returned 0 after 293 usecs calling ahc_linux_init+0x0/0x65 @ 1 initcall ahc_linux_init+0x0/0x65 returned 0 after 424 usecs calling ahd_linux_init+0x0/0x80 @ 1 initcall ahd_linux_init+0x0/0x80 returned 0 after 386 usecs calling aac_init+0x0/0x73 @ 1 Adaptec aacraid driver 1.1-5[2461]-ms initcall aac_init+0x0/0x73 returned 0 after 3826 usecs calling ips_module_init+0x0/0x67 @ 1 initcall ips_module_init+0x0/0x67 returned -19 after 590 usecs calling init_this_scsi_driver+0x0/0xe3 @ 1 scsi: Detection failed (no card) initcall init_this_scsi_driver+0x0/0xe3 returned -19 after 4061 usecs calling qla1280_init+0x0/0x1b @ 1 initcall qla1280_init+0x0/0x1b returned 0 after 287 usecs calling lpfc_init+0x0/0xcd @ 1 Emulex LightPulse Fibre Channel SCSI driver 8.3.4 Copyright(c) 2004-2009 Emulex. All rights reserved. initcall lpfc_init+0x0/0xcd returned 0 after 9478 usecs calling init_this_scsi_driver+0x0/0xe3 @ 1 initcall init_this_scsi_driver+0x0/0xe3 returned -19 after 37 usecs calling dc395x_module_init+0x0/0x1b @ 1 initcall dc395x_module_init+0x0/0x1b returned 0 after 285 usecs calling megaraid_init+0x0/0xbc @ 1 initcall megaraid_init+0x0/0xbc returned 0 after 352 usecs calling megasas_init+0x0/0x16e @ 1 megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 initcall megasas_init+0x0/0x16e returned 0 after 4893 usecs calling _scsih_init+0x0/0x119 @ 1 mpt2sas version 02.100.03.00 loaded PM: Adding info for No Bus:mpt2ctl initcall _scsih_init+0x0/0x119 returned 0 after 7225 usecs calling initio_init_driver+0x0/0x1b @ 1 initcall initio_init_driver+0x0/0x1b returned 0 after 308 usecs calling inia100_init+0x0/0x1b @ 1 initcall inia100_init+0x0/0x1b returned 0 after 310 usecs calling tw_init+0x0/0x30 @ 1 3ware Storage Controller device driver for Linux v1.26.02.002. initcall tw_init+0x0/0x30 returned 0 after 5860 usecs calling twa_init+0x0/0x30 @ 1 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. initcall twa_init+0x0/0x30 returned 0 after 6338 usecs calling stex_init+0x0/0x30 @ 1 stex: Promise SuperTrak EX Driver version: 4.6.0000.3 initcall stex_init+0x0/0x30 returned 0 after 5096 usecs calling pmcraid_init+0x0/0x13b @ 1 initcall pmcraid_init+0x0/0x13b returned 0 after 671 usecs calling init_sd+0x0/0x161 @ 1 initcall init_sd+0x0/0x161 returned 0 after 728 usecs calling init_sr+0x0/0x46 @ 1 initcall init_sr+0x0/0x46 returned 0 after 275 usecs calling init_sg+0x0/0x125 @ 1 initcall init_sg+0x0/0x125 returned 0 after 461 usecs calling ahci_init+0x0/0x1b @ 1 initcall ahci_init+0x0/0x1b returned 0 after 390 usecs calling k2_sata_init+0x0/0x1b @ 1 initcall k2_sata_init+0x0/0x1b returned 0 after 305 usecs calling piix_init+0x0/0x29 @ 1 ata_piix 0000:00:1f.1: version 2.13 IOAPIC[0]: Set routing entry (2-22 -> 0x59 -> IRQ 22 Mode:1 Active:1) ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix PM: Adding info for No Bus:host0 PM: Adding info for No Bus:host0 scsi1 : ata_piix PM: Adding info for No Bus:host1 PM: Adding info for No Bus:host1 ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 IOAPIC[0]: Set routing entry (2-23 -> 0x61 -> IRQ 23 Mode:1 Active:1) ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 calling 1_async_port_probe+0x0/0xbb @ 827 calling 2_async_port_probe+0x0/0xbb @ 828 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi2 : ata_piix PM: Adding info for No Bus:host2 PM: Adding info for No Bus:host2 scsi3 : ata_piix PM: Adding info for No Bus:host3 PM: Adding info for No Bus:host3 ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23 ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23 calling 3_async_port_probe+0x0/0xbb @ 833 calling 4_async_port_probe+0x0/0xbb @ 834 initcall piix_init+0x0/0x29 returned 0 after 175181 usecs calling pdc_ata_init+0x0/0x1b @ 1 initcall pdc_ata_init+0x0/0x1b returned 0 after 326 usecs calling sil24_init+0x0/0x1b @ 1 initcall sil24_init+0x0/0x1b returned 0 after 317 usecs calling nv_init+0x0/0x1b @ 1 initcall nv_init+0x0/0x1b returned 0 after 369 usecs calling amd_init+0x0/0x1b @ 1 initcall amd_init+0x0/0x1b returned 0 after 311 usecs calling atp867x_init+0x0/0x1b @ 1 initcall atp867x_init+0x0/0x1b returned 0 after 309 usecs calling cmd64x_init+0x0/0x1b @ 1 initcall cmd64x_init+0x0/0x1b returned 0 after 316 usecs calling cs5520_init+0x0/0x1b @ 1 initcall cs5520_init+0x0/0x1b returned 0 after 307 usecs calling it8213_init+0x0/0x1b @ 1 initcall it8213_init+0x0/0x1b returned 0 after 309 usecs calling ninja32_init+0x0/0x1b @ 1 initcall ninja32_init+0x0/0x1b returned 0 after 308 usecs calling ns87415_init+0x0/0x1b @ 1 initcall ns87415_init+0x0/0x1b returned 0 after 304 usecs calling marvell_init+0x0/0x1b @ 1 initcall marvell_init+0x0/0x1b returned 0 after 368 usecs calling oldpiix_init+0x0/0x1b @ 1 ata1.00: unsupported CDB len async_waiting @ 828 initcall oldpiix_init+0x0/0x1b returned 0 after 16153 usecs calling pdc2027x_init+0x0/0x1b @ 1 initcall pdc2027x_init+0x0/0x1b returned 0 after 305 usecs calling radisys_init+0x0/0x1b @ 1 initcall radisys_init+0x0/0x1b returned 0 after 358 usecs calling sil680_init+0x0/0x1b @ 1 initcall sil680_init+0x0/0x1b returned 0 after 313 usecs calling via_init+0x0/0x1b @ 1 async_waiting @ 834 initcall via_init+0x0/0x1b returned 0 after 13206 usecs calling spi_gpio_init+0x0/0x19 @ 1 initcall spi_gpio_init+0x0/0x19 returned -19 after 557 usecs calling e1000_init_module+0x0/0x6b @ 1 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. initcall e1000_init_module+0x0/0x6b returned 0 after 9562 usecs calling ipg_init_module+0x0/0x1b @ 1 initcall ipg_init_module+0x0/0x1b returned 0 after 312 usecs calling atl1c_init_module+0x0/0x1b @ 1 ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) initcall atl1c_init_module+0x0/0x1b returned 0 after 10278 usecs calling enic_init_module+0x0/0x37 @ 1 enic: Cisco 10G Ethernet Driver, ver 1.1.0.100 initcall enic_init_module+0x0/0x37 returned 0 after 4660 usecs calling ne2k_pci_init+0x0/0x1b @ 1 initcall ne2k_pci_init+0x0/0x1b returned 0 after 542 usecs calling e100_init_module+0x0/0x5d @ 1 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation initcall e100_init_module+0x0/0x5d returned 0 after 9302 usecs calling sis900_init_module+0x0/0x1b @ 1 initcall sis900_init_module+0x0/0x1b returned 0 after 387 usecs calling yellowfin_init+0x0/0x1b @ 1 ata3.00: configured for UDMA/133 async_waiting @ 833 initcall yellowfin_init+0x0/0x1b returned 0 after 5340 usecs calling ns83820_init+0x0/0x29 @ 1 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. initcall ns83820_init+0x0/0x29 returned 0 after 5818 usecs calling fealnx_init+0x0/0x1b @ 1 initcall fealnx_init+0x0/0x1b returned 0 after 308 usecs calling tg3_init+0x0/0x1b @ 1 initcall tg3_init+0x0/0x1b returned 0 after 309 usecs calling skge_init_module+0x0/0x1b @ 1 initcall skge_init_module+0x0/0x1b returned 0 after 313 usecs calling sky2_init_module+0x0/0x29 @ 1 sky2 driver version 1.25 sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 EC chip revision 2 PM: Adding info for No Bus:eth0 sky2 eth0: addr 00:15:f2:e6:8e:6b initcall sky2_init_module+0x0/0x29 returned 0 after 23877 usecs calling cicada_init+0x0/0x3c @ 1 initcall cicada_init+0x0/0x3c returned 0 after 552 usecs calling lxt_init+0x0/0x3c @ 1 initcall lxt_init+0x0/0x3c returned 0 after 562 usecs calling broadcom_init+0x0/0x143 @ 1 initcall broadcom_init+0x0/0x143 returned 0 after 2810 usecs calling ip175c_init+0x0/0x12 @ 1 initcall ip175c_init+0x0/0x12 returned 0 after 278 usecs calling realtek_init+0x0/0x12 @ 1 initcall realtek_init+0x0/0x12 returned 0 after 273 usecs calling et1011c_init+0x0/0x12 @ 1 initcall et1011c_init+0x0/0x12 returned 0 after 270 usecs calling fixed_mdio_bus_init+0x0/0xf7 @ 1 PM: Adding info for platform:Fixed MDIO bus.0 PM: Adding info for No Bus:0 Fixed MDIO Bus: probed initcall fixed_mdio_bus_init+0x0/0xf7 returned 0 after 9796 usecs calling sundance_init+0x0/0x1b @ 1 initcall sundance_init+0x0/0x1b returned 0 after 314 usecs calling hamachi_init+0x0/0x1b @ 1 initcall hamachi_init+0x0/0x1b returned 0 after 300 usecs calling net_olddevs_init+0x0/0x2f @ 1 initcall net_olddevs_init+0x0/0x2f returned 0 after 463 usecs calling hp100_module_init+0x0/0x1b @ 1 initcall hp100_module_init+0x0/0x1b returned 0 after 376 usecs calling init_nic+0x0/0x1b @ 1 initcall init_nic+0x0/0x1b returned 0 after 305 usecs calling ql3xxx_init_module+0x0/0x1b @ 1 initcall ql3xxx_init_module+0x0/0x1b returned 0 after 304 usecs calling qlge_init_module+0x0/0x1b @ 1 initcall qlge_init_module+0x0/0x1b returned 0 after 301 usecs calling ppp_init+0x0/0xf0 @ 1 PPP generic driver version 2.4.2 PM: Adding info for No Bus:ppp initcall ppp_init+0x0/0xf0 returned 0 after 6664 usecs calling ppp_sync_init+0x0/0x36 @ 1 initcall ppp_sync_init+0x0/0x36 returned 0 after 1 usecs calling ppp_mppe_init+0x0/0x110 @ 1 PPP MPPE Compression module registered initcall ppp_mppe_init+0x0/0x110 returned 0 after 4463 usecs calling pppox_init+0x0/0x12 @ 1 NET: Registered protocol family 24 initcall pppox_init+0x0/0x12 returned 0 after 3182 usecs calling pppoe_init+0x0/0x94 @ 1 initcall pppoe_init+0x0/0x94 returned 0 after 94 usecs calling slip_init+0x0/0xc1 @ 1 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). CSLIP: code copyright 1989 Regents of the University of California. SLIP linefill/keepalive option. initcall slip_init+0x0/0xc1 returned 0 after 17263 usecs calling netif_init+0x0/0x52 @ 1 initcall netif_init+0x0/0x52 returned -19 after 0 usecs calling rtl8139_init_module+0x0/0x1b @ 1 initcall rtl8139_init_module+0x0/0x1b returned 0 after 306 usecs calling tun_init+0x0/0x93 @ 1 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky PM: Adding info for No Bus:tun initcall tun_init+0x0/0x93 returned 0 after 11886 usecs calling rio_init+0x0/0x1b @ 1 initcall rio_init+0x0/0x1b returned 0 after 306 usecs calling amd8111e_init+0x0/0x1b @ 1 initcall amd8111e_init+0x0/0x1b returned 0 after 310 usecs calling myri10ge_init_module+0x0/0x74 @ 1 myri10ge: Version 1.5.0-1.432 initcall myri10ge_init_module+0x0/0x74 returned 0 after 3128 usecs calling mlx4_init+0x0/0xa2 @ 1 initcall mlx4_init+0x0/0xa2 returned 0 after 464 usecs calling mlx4_en_init+0x0/0x12 @ 1 initcall mlx4_en_init+0x0/0x12 returned 0 after 30 usecs calling enc28j60_init+0x0/0x23 @ 1 initcall enc28j60_init+0x0/0x23 returned 0 after 251 usecs calling tms_pci_init+0x0/0x1b @ 1 initcall tms_pci_init+0x0/0x1b returned 0 after 308 usecs calling catc_init+0x0/0x39 @ 1 usbcore: registered new interface driver catc catc: v2.8:CATC EL1210A NetMate USB Ethernet driver initcall catc_init+0x0/0x39 returned 0 after 9135 usecs calling kaweth_init+0x0/0x1b @ 1 usbcore: registered new interface driver kaweth initcall kaweth_init+0x0/0x1b returned 0 after 4596 usecs calling usb_rtl8150_init+0x0/0x29 @ 1 rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver usbcore: registered new interface driver rtl8150 initcall usb_rtl8150_init+0x0/0x29 returned 0 after 10226 usecs calling hso_init+0x0/0x1a7 @ 1 hso: drivers/net/usb/hso.c: 1.2 Option Wireless usbcore: registered new interface driver hso initcall hso_init+0x0/0x1a7 returned 0 after 8702 usecs calling cdc_init+0x0/0x1b @ 1 usbcore: registered new interface driver cdc_ether initcall cdc_init+0x0/0x1b returned 0 after 4845 usecs calling smsc95xx_init+0x0/0x1b @ 1 usbcore: registered new interface driver smsc95xx initcall smsc95xx_init+0x0/0x1b returned 0 after 4828 usecs calling net1080_init+0x0/0x1b @ 1 usbcore: registered new interface driver net1080 initcall net1080_init+0x0/0x1b returned 0 after 4693 usecs calling plusb_init+0x0/0x1b @ 1 usbcore: registered new interface driver plusb initcall plusb_init+0x0/0x1b returned 0 after 4529 usecs calling zaurus_init+0x0/0x1b @ 1 usbcore: registered new interface driver zaurus initcall zaurus_init+0x0/0x1b returned 0 after 4587 usecs calling mcs7830_init+0x0/0x1b @ 1 usbcore: registered new interface driver MOSCHIP usb-ethernet driver initcall mcs7830_init+0x0/0x1b returned 0 after 6362 usecs calling usbnet_init+0x0/0x2b @ 1 initcall usbnet_init+0x0/0x2b returned 0 after 7 usecs calling w840_init+0x0/0x29 @ 1 winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker http://www.scyld.com/network/drivers.html initcall w840_init+0x0/0x29 returned 0 after 11127 usecs calling tulip_init+0x0/0x33 @ 1 initcall tulip_init+0x0/0x33 returned 0 after 307 usecs calling init_netconsole+0x0/0x165 @ 1 console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x165 returned 0 after 5916 usecs calling i2o_iop_init+0x0/0x49 @ 1 I2O subsystem v1.325 i2o: max drivers = 8 initcall i2o_iop_init+0x0/0x49 returned 0 after 4977 usecs calling i2o_block_init+0x0/0x121 @ 1 I2O Block Device OSM v1.325 initcall i2o_block_init+0x0/0x121 returned 0 after 3257 usecs calling i2o_scsi_init+0x0/0x44 @ 1 I2O SCSI Peripheral OSM v1.316 initcall i2o_scsi_init+0x0/0x44 returned 0 after 3117 usecs calling fusion_init+0x0/0x13b @ 1 Fusion MPT base driver 3.04.12 Copyright (c) 1999-2008 LSI Corporation initcall fusion_init+0x0/0x13b returned 0 after 6523 usecs calling mptfc_init+0x0/0xf3 @ 1 Fusion MPT FC Host driver 3.04.12 initcall mptfc_init+0x0/0xf3 returned 0 after 3402 usecs calling cdrom_init+0x0/0x8 @ 1 initcall cdrom_init+0x0/0x8 returned 0 after 0 usecs calling uwb_subsys_init+0x0/0x51 @ 1 initcall uwb_subsys_init+0x0/0x51 returned 0 after 300 usecs calling mon_init+0x0/0x116 @ 1 PM: Adding info for No Bus:usbmon0 initcall mon_init+0x0/0x116 returned 0 after 3924 usecs calling ehci_hcd_init+0x0/0xbd @ 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver IOAPIC[0]: Set routing entry (2-20 -> 0x69 -> IRQ 20 Mode:1 Active:1) ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller PM: Adding info for No Bus:usbmon1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd7cff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 PM: Adding info for usb:usb1 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 initcall ehci_hcd_init+0x0/0xbd returned 0 after 92834 usecs calling isp116x_init+0x0/0x3e @ 1 116x: driver isp116x-hcd, 03 Nov 2005 initcall isp116x_init+0x0/0x3e returned 0 after 3722 usecs calling ohci_hcd_mod_init+0x0/0x8e @ 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver initcall ohci_hcd_mod_init+0x0/0x8e returned 0 after 5199 usecs calling uhci_hcd_init+0x0/0xbe @ 1 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller PM: Adding info for No Bus:usbmon2 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007000 PM: Adding info for usb:usb2 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 IOAPIC[0]: Set routing entry (2-17 -> 0x71 -> IRQ 17 Mode:1 Active:1) uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller PM: Adding info for No Bus:usbmon3 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007400 PM: Adding info for usb:usb3 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 IOAPIC[0]: Set routing entry (2-18 -> 0x79 -> IRQ 18 Mode:1 Active:1) uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller PM: Adding info for No Bus:usbmon4 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800 PM: Adding info for usb:usb4 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller PM: Adding info for No Bus:usbmon5 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008000 PM: Adding info for usb:usb5 usb usb5: configuration #1 chosen from 1 choice PM: Adding info for usb:5-0:1.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 initcall uhci_hcd_init+0x0/0xbe returned 0 after 228120 usecs calling isp1760_init+0x0/0x50 @ 1 initcall isp1760_init+0x0/0x50 returned 0 after 621 usecs calling c67x00_init+0x0/0x12 @ 1 initcall c67x00_init+0x0/0x12 returned 0 after 288 usecs calling usb_usual_init+0x0/0x3f @ 1 usbcore: registered new interface driver libusual initcall usb_usual_init+0x0/0x3f returned 0 after 4922 usecs calling usb_mdc800_init+0x0/0x3a6 @ 1 usbcore: registered new interface driver mdc800 mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera initcall usb_mdc800_init+0x0/0x3a6 returned 0 after 11071 usecs calling microtek_drv_init+0x0/0x1b @ 1 usbcore: registered new interface driver microtekX6 initcall microtek_drv_init+0x0/0x1b returned 0 after 4939 usecs calling adu_init+0x0/0x96 @ 1 usbcore: registered new interface driver adutux adutux adutux (see www.ontrak.net) v0.0.13 adutux is an experimental driver. Use at your own risk initcall adu_init+0x0/0x96 returned 0 after 13431 usecs calling appledisplay_init+0x0/0x59 @ 1 usbcore: registered new interface driver appledisplay initcall appledisplay_init+0x0/0x59 returned 0 after 5277 usecs calling cypress_init+0x0/0x3a @ 1 usbcore: registered new interface driver cypress_cy7c63 initcall cypress_init+0x0/0x3a returned 0 after 5276 usecs calling emi62_init+0x0/0x38 @ 1 usbcore: registered new interface driver emi62 - firmware loader initcall emi62_init+0x0/0x38 returned 0 after 6047 usecs calling iowarrior_init+0x0/0x1b @ 1 usbcore: registered new interface driver iowarrior initcall iowarrior_init+0x0/0x1b returned 0 after 4921 usecs calling ld_usb_init+0x0/0x3a @ 1 usbcore: registered new interface driver ldusb initcall ld_usb_init+0x0/0x3a returned 0 after 4581 usecs calling lego_usb_tower_init+0x0/0x8b @ 1 usbcore: registered new interface driver legousbtower legousbtower: v0.96:LEGO USB Tower Driver initcall lego_usb_tower_init+0x0/0x8b returned 0 after 8982 usecs calling usb_sevseg_init+0x0/0x3a @ 1 usbcore: registered new interface driver usbsevseg initcall usb_sevseg_init+0x0/0x3a returned 0 after 4854 usecs calling i8042_init+0x0/0xad @ 1 PNP: No PS/2 controller found. Probing ports directly. PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 initcall i8042_init+0x0/0xad returned 0 after 26526 usecs calling serio_raw_init+0x0/0x1b @ 1 initcall serio_raw_init+0x0/0x1b returned 0 after 438 usecs calling mousedev_init+0x0/0x8d @ 1 PM: Adding info for No Bus:mice PM: Adding info for No Bus:mouse0 PM: Adding info for No Bus:psaux mice: PS/2 mouse device common for all mice initcall mousedev_init+0x0/0x8d returned 0 after 14489 usecs calling atkbd_init+0x0/0x27 @ 1 initcall atkbd_init+0x0/0x27 returned 0 after 302 usecs calling lkkbd_init+0x0/0x1b @ 1 initcall lkkbd_init+0x0/0x1b returned 0 after 422 usecs calling nkbd_init+0x0/0x1b @ 1 initcall nkbd_init+0x0/0x1b returned 0 after 303 usecs calling skbd_init+0x0/0x1b @ 1 initcall skbd_init+0x0/0x1b returned 0 after 321 usecs calling bcm5974_init+0x0/0x1b @ 1 usbcore: registered new interface driver bcm5974 initcall bcm5974_init+0x0/0x1b returned 0 after 5215 usecs calling sermouse_init+0x0/0x1b @ 1 initcall sermouse_init+0x0/0x1b returned 0 after 328 usecs calling kbtab_init+0x0/0x38 @ 1 usbcore: registered new interface driver kbtab kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver initcall kbtab_init+0x0/0x38 returned 0 after 9099 usecs calling fujitsu_init+0x0/0x1b @ 1 initcall fujitsu_init+0x0/0x1b returned 0 after 649 usecs calling mk712_init+0x0/0x1ea @ 1 mk712: device not present initcall mk712_init+0x0/0x1ea returned -19 after 2486 usecs calling powermate_init+0x0/0x1b @ 1 usbcore: registered new interface driver powermate initcall powermate_init+0x0/0x1b returned 0 after 4845 usecs calling rotary_encoder_init+0x0/0x12 @ 1 initcall rotary_encoder_init+0x0/0x12 returned 0 after 256 usecs calling videodev_init+0x0/0x89 @ 1 Linux video capture interface: v2.00 initcall videodev_init+0x0/0x89 returned 0 after 3608 usecs calling w1_init+0x0/0xa9 @ 1 Driver for 1-wire Dallas network protocol. initcall w1_init+0x0/0xa9 returned 0 after 4728 usecs calling matrox_w1_init+0x0/0x1b @ 1 initcall matrox_w1_init+0x0/0x1b returned 0 after 332 usecs calling ds_init+0x0/0x3f @ 1 usbcore: registered new interface driver DS9490R initcall ds_init+0x0/0x3f returned 0 after 4742 usecs calling w1_gpio_init+0x0/0x19 @ 1 initcall w1_gpio_init+0x0/0x19 returned -19 after 512 usecs calling w1_therm_init+0x0/0x32 @ 1 initcall w1_therm_init+0x0/0x32 returned 0 after 48 usecs calling w1_ds2760_init+0x0/0x2c @ 1 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko initcall w1_ds2760_init+0x0/0x2c returned 0 after 7509 usecs calling ds2760_battery_init+0x0/0x12 @ 1 initcall ds2760_battery_init+0x0/0x12 returned 0 after 255 usecs calling wdtpci_init+0x0/0x1b @ 1 initcall wdtpci_init+0x0/0x1b returned 0 after 305 usecs calling advwdt_init+0x0/0x5f @ 1 WDT driver for Advantech single board computer initialising. PM: Adding info for platform:advantechwdt PM: Adding info for No Bus:watchdog advantechwdt: initialized. timeout=60 sec (nowayout=0) initcall advwdt_init+0x0/0x5f returned 0 after 18542 usecs calling sc520_wdt_init+0x0/0xef @ 1 sc520_wdt: cannot register miscdev on minor=130 (err=-16) initcall sc520_wdt_init+0x0/0xef returned -16 after 5234 usecs initcall sc520_wdt_init+0x0/0xef returned with error code -16 calling it87_wdt_init+0x0/0x4c8 @ 1 IT87 WDT: no device initcall it87_wdt_init+0x0/0x4c8 returned -19 after 1937 usecs calling pc87413_init+0x0/0x91 @ 1 pc87413 WDT: Version 1.1 at io 0x2E pc87413 WDT: cannot register miscdev on minor=130 (err=-16) initcall pc87413_init+0x0/0x91 returned -16 after 8598 usecs initcall pc87413_init+0x0/0x91 returned with error code -16 calling sbc60xxwdt_init+0x0/0x185 @ 1 sbc60xxwdt: I/O address 0x0443 already in use initcall sbc60xxwdt_init+0x0/0x185 returned -5 after 4137 usecs initcall sbc60xxwdt_init+0x0/0x185 returned with error code -5 calling cpu5wdt_init_module+0x0/0x10 @ 1 cpu5wdt: sorry, was my fault cpu5wdt: misc_register failed initcall cpu5wdt_init_module+0x0/0x10 returned -16 after 5459 usecs initcall cpu5wdt_init_module+0x0/0x10 returned with error code -16 calling w83977f_wdt_init+0x0/0x149 @ 1 W83977F WDT: W83977F WDT driver, v1.00 W83977F WDT: cannot register miscdev on minor=130 (err=-16) initcall w83977f_wdt_init+0x0/0x149 returned -16 after 8838 usecs initcall w83977f_wdt_init+0x0/0x149 returned with error code -16 calling bpa10x_init+0x0/0x30 @ 1 Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x initcall bpa10x_init+0x0/0x30 returned 0 after 9203 usecs calling bfusb_init+0x0/0x54 @ 1 Bluetooth: BlueFRITZ! USB driver ver 1.2 usbcore: registered new interface driver bfusb initcall bfusb_init+0x0/0x54 returned 0 after 8194 usecs calling init_ladder+0x0/0x12 @ 1 cpuidle: using governor ladder initcall init_ladder+0x0/0x12 returned 0 after 2875 usecs calling init_menu+0x0/0x12 @ 1 cpuidle: using governor menu initcall init_menu+0x0/0x12 returned 0 after 2685 usecs calling i7300_idle_init+0x0/0x17e @ 1 initcall i7300_idle_init+0x0/0x17e returned -19 after 187 usecs calling memstick_init+0x0/0x85 @ 1 initcall memstick_init+0x0/0x85 returned 0 after 625 usecs calling jmb38x_ms_init+0x0/0x1b @ 1 initcall jmb38x_ms_init+0x0/0x1b returned 0 after 374 usecs calling timer_trig_init+0x0/0x12 @ 1 initcall timer_trig_init+0x0/0x12 returned 0 after 61 usecs calling ib_core_init+0x0/0x44 @ 1 initcall ib_core_init+0x0/0x44 returned 0 after 241 usecs calling ib_mad_init_module+0x0/0xcd @ 1 initcall ib_mad_init_module+0x0/0xcd returned 0 after 27 usecs calling ib_sa_init+0x0/0x67 @ 1 initcall ib_sa_init+0x0/0x67 returned 0 after 89 usecs calling ib_cm_init+0x0/0x157 @ 1 initcall ib_cm_init+0x0/0x157 returned 0 after 393 usecs calling iw_cm_init+0x0/0x35 @ 1 initcall iw_cm_init+0x0/0x35 returned 0 after 89 usecs calling ib_umad_init+0x0/0xcb @ 1 initcall ib_umad_init+0x0/0xcb returned 0 after 262 usecs calling infinipath_init+0x0/0xc5 @ 1 initcall infinipath_init+0x0/0xc5 returned 0 after 480 usecs calling efivars_init+0x0/0x239 @ 1 initcall efivars_init+0x0/0x239 returned -19 after 0 usecs calling ibft_init+0x0/0x19b @ 1 No iBFT detected. initcall ibft_init+0x0/0x19b returned 0 after 1826 usecs calling hid_init+0x0/0x66 @ 1 initcall hid_init+0x0/0x66 returned 0 after 653 usecs calling usb_kbd_init+0x0/0x38 @ 1 usbcore: registered new interface driver usbkbd usbkbd: :USB HID Boot Protocol keyboard driver initcall usb_kbd_init+0x0/0x38 returned 0 after 8905 usecs calling usb_mouse_init+0x0/0x38 @ 1 usbcore: registered new interface driver usbmouse usbmouse: v1.6:USB HID Boot Protocol mouse driver initcall usb_mouse_init+0x0/0x38 returned 0 after 9289 usecs calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 251 usecs calling init_soundcore+0x0/0x95 @ 1 initcall init_soundcore+0x0/0x95 returned 0 after 280 usecs calling alsa_sound_init+0x0/0xa4 @ 1 Advanced Linux Sound Architecture Driver Version 1.0.21. initcall alsa_sound_init+0x0/0xa4 returned 0 after 5344 usecs calling alsa_hwdep_init+0x0/0x64 @ 1 initcall alsa_hwdep_init+0x0/0x64 returned 0 after 62 usecs calling alsa_timer_init+0x0/0xd7 @ 1 PM: Adding info for No Bus:timer initcall alsa_timer_init+0x0/0xd7 returned 0 after 3472 usecs calling snd_hrtimer_init+0x0/0x108 @ 1 initcall snd_hrtimer_init+0x0/0x108 returned 0 after 26 usecs calling alsa_pcm_init+0x0/0x6c @ 1 initcall alsa_pcm_init+0x0/0x6c returned 0 after 43 usecs calling snd_mem_init+0x0/0x2c @ 1 initcall snd_mem_init+0x0/0x2c returned 0 after 19 usecs calling alsa_rawmidi_init+0x0/0xa4 @ 1 initcall alsa_rawmidi_init+0x0/0xa4 returned 0 after 13 usecs calling alsa_mixer_oss_init+0x0/0x3d @ 1 initcall alsa_mixer_oss_init+0x0/0x3d returned 0 after 0 usecs calling alsa_opl3_init+0x0/0x8 @ 1 initcall alsa_opl3_init+0x0/0x8 returned 0 after 0 usecs calling alsa_mpu401_uart_init+0x0/0x8 @ 1 initcall alsa_mpu401_uart_init+0x0/0x8 returned 0 after 0 usecs calling alsa_card_mpu401_init+0x0/0xc1 @ 1 initcall alsa_card_mpu401_init+0x0/0xc1 returned -19 after 1106 usecs calling alsa_vx_core_init+0x0/0x8 @ 1 initcall alsa_vx_core_init+0x0/0x8 returned 0 after 0 usecs calling alsa_sb_common_init+0x0/0x8 @ 1 initcall alsa_sb_common_init+0x0/0x8 returned 0 after 0 usecs calling alsa_card_als4000_init+0x0/0x1b @ 1 initcall alsa_card_als4000_init+0x0/0x1b returned 0 after 402 usecs calling alsa_card_atiixp_init+0x0/0x1b @ 1 initcall alsa_card_atiixp_init+0x0/0x1b returned 0 after 371 usecs calling alsa_card_atiixp_init+0x0/0x1b @ 1 initcall alsa_card_atiixp_init+0x0/0x1b returned 0 after 371 usecs calling alsa_card_azf3328_init+0x0/0x1b @ 1 initcall alsa_card_azf3328_init+0x0/0x1b returned 0 after 432 usecs calling alsa_card_cmipci_init+0x0/0x1b @ 1 initcall alsa_card_cmipci_init+0x0/0x1b returned 0 after 367 usecs calling alsa_card_cs4281_init+0x0/0x1b @ 1 initcall alsa_card_cs4281_init+0x0/0x1b returned 0 after 375 usecs calling alsa_card_es1938_init+0x0/0x1b @ 1 initcall alsa_card_es1938_init+0x0/0x1b returned 0 after 376 usecs calling alsa_card_es1968_init+0x0/0x1b @ 1 initcall alsa_card_es1968_init+0x0/0x1b returned 0 after 371 usecs calling alsa_card_intel8x0m_init+0x0/0x1b @ 1 initcall alsa_card_intel8x0m_init+0x0/0x1b returned 0 after 368 usecs calling alsa_card_rme96_init+0x0/0x1b @ 1 initcall alsa_card_rme96_init+0x0/0x1b returned 0 after 373 usecs calling alsa_card_sonicvibes_init+0x0/0x1b @ 1 initcall alsa_card_sonicvibes_init+0x0/0x1b returned 0 after 370 usecs calling alsa_ac97_init+0x0/0x8 @ 1 initcall alsa_ac97_init+0x0/0x8 returned 0 after 0 usecs calling alsa_card_vortex_init+0x0/0x1b @ 1 initcall alsa_card_vortex_init+0x0/0x1b returned 0 after 382 usecs calling alsa_card_vortex_init+0x0/0x1b @ 1 initcall alsa_card_vortex_init+0x0/0x1b returned 0 after 372 usecs calling ct_card_init+0x0/0x1b @ 1 initcall ct_card_init+0x0/0x1b returned 0 after 373 usecs calling alsa_card_cs46xx_init+0x0/0x1b @ 1 initcall alsa_card_cs46xx_init+0x0/0x1b returned 0 after 374 usecs calling mod_init+0x0/0x1b @ 1 initcall mod_init+0x0/0x1b returned 0 after 441 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 373 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 371 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 372 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 370 usecs calling alsa_card_echo_init+0x0/0x1b @ 1 initcall alsa_card_echo_init+0x0/0x1b returned 0 after 375 usecs calling alsa_card_emu10k1_init+0x0/0x1b @ 1 initcall alsa_card_emu10k1_init+0x0/0x1b returned 0 after 426 usecs calling alsa_card_hifier_init+0x0/0x1b @ 1 initcall alsa_card_hifier_init+0x0/0x1b returned 0 after 379 usecs calling alsa_card_riptide_init+0x0/0x1b @ 1 initcall alsa_card_riptide_init+0x0/0x1b returned 0 after 374 usecs calling alsa_card_hammerfall_init+0x0/0x1b @ 1 initcall alsa_card_hammerfall_init+0x0/0x1b returned 0 after 373 usecs calling alsa_card_hdspm_init+0x0/0x1b @ 1 initcall alsa_card_hdspm_init+0x0/0x1b returned 0 after 372 usecs calling alsa_card_vx222_init+0x0/0x1b @ 1 initcall alsa_card_vx222_init+0x0/0x1b returned 0 after 439 usecs calling alsa_util_mem_init+0x0/0x8 @ 1 initcall alsa_util_mem_init+0x0/0x8 returned 0 after 0 usecs calling alsa_sound_last_init+0x0/0x6f @ 1 ALSA device list: No soundcards found. initcall alsa_sound_last_init+0x0/0x6f returned 0 after 3893 usecs calling flow_cache_init+0x0/0x11b @ 1 initcall flow_cache_init+0x0/0x11b returned 0 after 30 usecs calling pg_init+0x0/0x10e @ 1 pktgen 2.72: Packet Generator for packet performance testing. initcall pg_init+0x0/0x10e returned 0 after 5655 usecs calling llc_init+0x0/0x20 @ 1 initcall llc_init+0x0/0x20 returned 0 after 2 usecs calling llc2_init+0x0/0xa8 @ 1 NET: Registered protocol family 26 initcall llc2_init+0x0/0xa8 returned 0 after 3268 usecs calling snap_init+0x0/0x39 @ 1 initcall snap_init+0x0/0x39 returned 0 after 16 usecs calling rif_init+0x0/0x77 @ 1 initcall rif_init+0x0/0x77 returned 0 after 19 usecs calling ipip_init+0x0/0x71 @ 1 IPv4 over IPv4 tunneling driver PM: Adding info for No Bus:tunl0 initcall ipip_init+0x0/0x71 returned 0 after 6683 usecs calling ipgre_init+0x0/0xb3 @ 1 GRE over IPv4 tunneling driver PM: Adding info for No Bus:gre0 initcall ipgre_init+0x0/0xb3 returned 0 after 6513 usecs calling init_syncookies+0x0/0x19 @ 1 initcall init_syncookies+0x0/0x19 returned 0 after 32 usecs calling ipcomp4_init+0x0/0x66 @ 1 initcall ipcomp4_init+0x0/0x66 returned 0 after 3 usecs calling ipip_init+0x0/0x9c @ 1 initcall ipip_init+0x0/0x9c returned 0 after 20 usecs calling xfrm4_beet_init+0x0/0x17 @ 1 initcall xfrm4_beet_init+0x0/0x17 returned 0 after 1 usecs calling tunnel4_init+0x0/0x66 @ 1 initcall tunnel4_init+0x0/0x66 returned 0 after 1 usecs calling tcp_westwood_register+0x0/0x12 @ 1 TCP westwood registered initcall tcp_westwood_register+0x0/0x12 returned 0 after 2242 usecs calling hybla_register+0x0/0x12 @ 1 TCP hybla registered initcall hybla_register+0x0/0x12 returned 0 after 1996 usecs calling tcp_vegas_register+0x0/0x14 @ 1 TCP vegas registered initcall tcp_vegas_register+0x0/0x14 returned 0 after 1987 usecs calling tcp_illinois_register+0x0/0x12 @ 1 TCP illinois registered initcall tcp_illinois_register+0x0/0x12 returned 0 after 2249 usecs calling xfrm_user_init+0x0/0x4a @ 1 Initializing XFRM netlink socket initcall xfrm_user_init+0x0/0x4a returned 0 after 3065 usecs calling packet_init+0x0/0x47 @ 1 NET: Registered protocol family 17 initcall packet_init+0x0/0x47 returned 0 after 3218 usecs calling br_init+0x0/0xad @ 1 initcall br_init+0x0/0xad returned 0 after 48 usecs calling ipx_init+0x0/0xf5 @ 1 NET: Registered protocol family 4 initcall ipx_init+0x0/0xf5 returned 0 after 3197 usecs calling atalk_init+0x0/0x88 @ 1 NET: Registered protocol family 5 initcall atalk_init+0x0/0x88 returned 0 after 3192 usecs calling can_init+0x0/0x120 @ 1 can: controller area network core (rev 20090105 abi 8) NET: Registered protocol family 29 initcall can_init+0x0/0x120 returned 0 after 8231 usecs calling raw_module_init+0x0/0x3d @ 1 can: raw protocol (rev 20090105) initcall raw_module_init+0x0/0x3d returned 0 after 3026 usecs calling bcm_module_init+0x0/0x5b @ 1 can: broadcast manager protocol (rev 20090105 t) initcall bcm_module_init+0x0/0x5b returned 0 after 4385 usecs calling af_rxrpc_init+0x0/0x1a0 @ 1 NET: Registered protocol family 33 initcall af_rxrpc_init+0x0/0x1a0 returned 0 after 3330 usecs calling rxkad_init+0x0/0x68 @ 1 RxRPC: Registered security type 2 'rxkad' initcall rxkad_init+0x0/0x68 returned 0 after 4626 usecs calling econet_proto_init+0x0/0x5b @ 1 NET: Registered protocol family 19 initcall econet_proto_init+0x0/0x5b returned 0 after 3316 usecs calling phonet_init+0x0/0x78 @ 1 NET: Registered protocol family 35 initcall phonet_init+0x0/0x78 returned 0 after 3279 usecs calling pep_register+0x0/0x17 @ 1 initcall pep_register+0x0/0x17 returned 0 after 5 usecs calling ieee802154_nl_init+0x0/0x8b @ 1 initcall ieee802154_nl_init+0x0/0x8b returned 0 after 95 usecs calling af_ieee802154_init+0x0/0x79 @ 1 NET: Registered protocol family 36 initcall af_ieee802154_init+0x0/0x79 returned 0 after 3200 usecs calling wimax_subsys_init+0x0/0x1f3 @ 1 initcall wimax_subsys_init+0x0/0x1f3 returned 0 after 61 usecs calling mce_debugfs_init+0x0/0x3c @ 1 initcall mce_debugfs_init+0x0/0x3c returned 0 after 39 usecs calling severities_debugfs_init+0x0/0x3c @ 1 initcall severities_debugfs_init+0x0/0x3c returned 0 after 18 usecs calling hpet_insert_resource+0x0/0x23 @ 1 initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs initcall hpet_insert_resource+0x0/0x23 returned with error code 1 calling lapic_insert_resource+0x0/0x3f @ 1 initcall lapic_insert_resource+0x0/0x3f returned 0 after 4 usecs calling init_lapic_nmi_sysfs+0x0/0x39 @ 1 initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs calling io_apic_bug_finalize+0x0/0x1b @ 1 initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs calling check_early_ioremap_leak+0x0/0x65 @ 1 initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs calling sched_init_debug+0x0/0x24 @ 1 initcall sched_init_debug+0x0/0x24 returned 0 after 24 usecs calling init_oops_id+0x0/0x36 @ 1 initcall init_oops_id+0x0/0x36 returned 0 after 5 usecs calling disable_boot_consoles+0x0/0x45 @ 1 initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs calling pm_qos_power_init+0x0/0x61 @ 1 PM: Adding info for No Bus:cpu_dma_latency PM: Adding info for No Bus:network_latency PM: Adding info for No Bus:network_throughput initcall pm_qos_power_init+0x0/0x61 returned 0 after 12911 usecs calling software_resume+0x0/0x1d8 @ 1 PM: Resume from disk failed. initcall software_resume+0x0/0x1d8 returned -2 after 2746 usecs initcall software_resume+0x0/0x1d8 returned with error code -2 calling taskstats_init+0x0/0x95 @ 1 registered taskstats version 1 initcall taskstats_init+0x0/0x95 returned 0 after 2870 usecs calling clear_boot_tracer+0x0/0x2d @ 1 initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs calling fail_page_alloc_debugfs+0x0/0xe1 @ 1 initcall fail_page_alloc_debugfs+0x0/0xe1 returned 0 after 177 usecs calling max_swapfiles_check+0x0/0x8 @ 1 initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs calling failslab_debugfs_init+0x0/0x6b @ 1 initcall failslab_debugfs_init+0x0/0x6b returned 0 after 133 usecs calling kmemleak_late_init+0x0/0x89 @ 1 kmemleak: Kernel memory leak detector initialized initcall kmemleak_late_init+0x0/0x89 returned 0 after 4553 usecs calling init_ima+0x0/0x1a @ 1 kmemleak: Automatic memory scanning thread started No TPM chip found, activating TPM-bypass! initcall init_ima+0x0/0x1a returned 0 after 8469 usecs calling fail_make_request_debugfs+0x0/0x19 @ 1 initcall fail_make_request_debugfs+0x0/0x19 returned 0 after 416 usecs calling fail_io_timeout_debugfs+0x0/0x19 @ 1 initcall fail_io_timeout_debugfs+0x0/0x19 returned 0 after 258 usecs calling random32_reseed+0x0/0x56 @ 1 initcall random32_reseed+0x0/0x56 returned 0 after 7 usecs calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1 initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 17 usecs calling pci_sysfs_init+0x0/0x51 @ 1 initcall pci_sysfs_init+0x0/0x51 returned 0 after 1271 usecs calling boot_wait_for_devices+0x0/0x19 @ 1 initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs calling regulator_init_complete+0x0/0x140 @ 1 initcall regulator_init_complete+0x0/0x140 returned 0 after 19 usecs calling seqgen_init+0x0/0xf @ 1 initcall seqgen_init+0x0/0xf returned 0 after 13 usecs calling late_resume_init+0x0/0x126 @ 1 Magic number: 13:700:373 vc vcsa1: hash matches initcall late_resume_init+0x0/0x126 returned 0 after 4753 usecs calling hd_init+0x0/0x302 @ 1 hd: no drives specified - use hd=cyl,head,sectors on kernel command line initcall hd_init+0x0/0x302 returned -1 after 6574 usecs initcall hd_init+0x0/0x302 returned with error code -1 calling scsi_complete_async_scans+0x0/0x166 @ 1 initcall scsi_complete_async_scans+0x0/0x166 returned 0 after 0 usecs calling edd_init+0x0/0x1c6 @ 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found initcall edd_init+0x0/0x1c6 returned 0 after 5238 usecs calling memmap_init+0x0/0xa3 @ 1 initcall memmap_init+0x0/0xa3 returned 0 after 362 usecs calling pci_mmcfg_late_insert_resources+0x0/0x41 @ 1 initcall pci_mmcfg_late_insert_resources+0x0/0x41 returned 0 after 9 usecs calling init_net_drop_monitor+0x0/0x142 @ 1 Initalizing network drop monitor service initcall init_net_drop_monitor+0x0/0x142 returned 0 after 3777 usecs calling tcp_congestion_default+0x0/0x12 @ 1 initcall tcp_congestion_default+0x0/0x12 returned 0 after 2 usecs calling initialize_hashrnd+0x0/0x19 @ 1 initcall initialize_hashrnd+0x0/0x19 returned 0 after 5 usecs async_waiting @ 1 ata1.00: unsupported CDB len async_waiting @ 827 async_continuing @ 827 after 1 usec initcall 1_async_port_probe+0x0/0xbb returned 0 after 10219617 usecs async_continuing @ 828 after 10058431 usec initcall 2_async_port_probe+0x0/0xbb returned 0 after 10225528 usecs async_continuing @ 833 after 9899190 usec scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 PM: Adding info for No Bus:target2:0:0 PM: Adding info for scsi:2:0:0:0 PM: Adding info for No Bus:2:0:0:0 PM: Adding info for No Bus:2:0:0:0 calling 5_sd_probe_async+0x0/0x1ef @ 828 sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) PM: Adding info for No Bus:sg0 sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 initcall 3_async_port_probe+0x0/0xbb returned 0 after 10241310 usecs async_continuing @ 834 after 10078387 usec initcall 4_async_port_probe+0x0/0xbb returned 0 after 10247317 usecs async_continuing @ 1 after 6861372 usec async_waiting @ 1 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA PM: Adding info for No Bus:sda sda: sda1 sda2 sda3 sda4 < sda5 > PM: Adding info for No Bus:sda1 PM: Adding info for No Bus:sda2 PM: Adding info for No Bus:sda3 PM: Adding info for No Bus:sda4 PM: Adding info for No Bus:sda5 PM: Adding info for No Bus:8:0 sd 2:0:0:0: [sda] Attached SCSI disk initcall 5_sd_probe_async+0x0/0x1ef returned 0 after 127432 usecs async_continuing @ 1 after 89734 usec EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. async/2 used greatest stack depth: 4680 bytes left async/1 used greatest stack depth: 4200 bytes left kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:3. async_waiting @ 1 async_continuing @ 1 after 1 usec debug: unmapping init memory ffffffff81def000..ffffffff81eba000 Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. modprobe used greatest stack depth: 3424 bytes left BUG: unable to handle kernel NULL pointer dereference at 0000000000000240 IP: [] uart_close+0x2a/0x1f9 PGD 79a76067 PUD 79aa9067 PMD 0 Oops: 0000 [#1] DEBUG_PAGEALLOC last sysfs file: CPU 0 Modules linked in: Pid: 1110, comm: hwclock Not tainted 2.6.32-rc4 #1 System Product Name RIP: 0010:[] [] uart_close+0x2a/0x1f9 RSP: 0018:ffff880079aafb28 EFLAGS: 00010246 RAX: ffffffff812ed34c RBX: ffff8800799cd000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880079a7cc80 RDI: ffff8800799cd000 RBP: ffff880079aafb68 R08: ffffffff81d2ede0 R09: 0000000000000246 R10: ffff880079a7cc80 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800799cd000 R14: ffff880079a7cc80 R15: ffff880079a7cc80 FS: 00007f7ce2f906f0(0000) GS:ffffffff81b42000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000240 CR3: 0000000079aad000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process hwclock (pid: 1110, threadinfo ffff880079aae000, task ffff88007a6a0000) Stack: 00000000ffffffff ffff88007bb88df0 ffff880079aafb68 ffff8800799cd000 <0> 0000000000000000 0000000000000000 ffff880079a7cc80 ffff88007bb88df0 <0> ffff880079aafc48 ffffffff812c772a 0000000000000001 ffffffff81776706 Call Trace: [] tty_release_dev+0x1ad/0x4c0 [] ? mutex_unlock+0xe/0x10 [] ? mutex_unlock+0xe/0x10 [] ? uart_open+0xb1/0x26a [] __tty_open+0x37b/0x471 [] tty_open+0xe/0x11 [] chrdev_open+0x18d/0x1ae [] ? chrdev_open+0x0/0x1ae [] __dentry_open+0x1c1/0x333 [] nameidata_to_filp+0x41/0x52 [] do_filp_open+0x4d5/0x9ae [] ? native_sched_clock+0x3b/0x52 [] ? sched_clock+0x17/0x1b [] ? lock_release_holdtime+0x1c/0x10e [] ? _spin_unlock+0x2b/0x30 [] ? alloc_fd+0x112/0x124 [] do_sys_open+0x63/0x10f [] sys_open+0x20/0x22 [] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 0f 1f 44 00 00 f6 05 62 77 56 01 08 4c 8b a7 28 04 00 00 49 89 fd 49 89 f7 <4d> 8b b4 24 40 02 00 00 74 16 f6 05 4b 77 56 01 40 74 0d 80 3d RIP [] uart_close+0x2a/0x1f9 RSP CR2: 0000000000000240 ---[ end trace a9fc1313607e0850 ]--- sky2 eth0: enabling interface sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both CPA self-test: 4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0 4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0 4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0 ok. end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 Buffer I/O error on device fd0, logical block 0 end_request: I/O error, dev fd0, sector 0 Buffer I/O error on device fd0, logical block 0 EXT3 FS on sda3, internal journal Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k rc.sysinit used greatest stack depth: 3376 bytes left warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs9 PM: Adding info for No Bus:vcsa9 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Adding info for No Bus:vcs10 PM: Adding info for No Bus:vcsa10 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Adding info for No Bus:vcs11 PM: Adding info for No Bus:vcsa11 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 kmemleak: 11 new suspected memory leaks (see /sys/kernel/debug/kmemleak)