From: Pavel Machek <pavel@ucw.cz>
To: rpurdie@rpsys.net, lenz@cs.wisc.edu,
kernel list <linux-kernel@vger.kernel.org>,
Russell King <rmk@arm.linux.org.uk>,
Dirk@Opfer-Online.de, arminlitzel@web.de,
Cyril Hrubis <metan@ucw.cz>,
thommycheck@gmail.com,
linux-arm-kernel <linux-arm-kernel@lists.arm.linux.org.uk>,
dbaryshkov@gmail.com, omegamoon@gmail.com,
Eric Miao <eric.y.miao@gmail.com>
Subject: Spitz battery questions
Date: Wed, 14 Oct 2009 13:22:00 +0200 [thread overview]
Message-ID: <20091014112200.GA16156@elf.ucw.cz> (raw)
Hi!
I did some measurements of spitz battery subsystem; maybe they are
useful for someone.
Unfortunately, concistent numbers are quite hard: longer/thinner
cables mean lower voltage and also lower currents :-(. I get quite
consistents 5V at power supply, but it goes down to 4.5..4.2V when it
reaches zaurus behind ampermeter. (Is zaurus even able to charge
battery properly from such low voltage?)
One big surprise was wlan CF card, eating +200mA when initialized.
I'm working on drivers/power/spitz_battery driver, and I'll need to
know conversion between ADC readings and milivolts; does someone have
those?
Does someone have better/more reliable/other power consumption numbers?
Pavel
Idle, charging, no backlight, linux 2.6.26: 200mA @ 4.8V
bl 1: 310mA
bl 10: 315mA
bl 20 340mA
bl 30: 390mA
bl 40: 440mA
bl 47: 445mA
disk is spinning: +50mA
find /: +200mA
cat /dev/zero: +100mA
make: +240mA
charging, powerdown: 380mA..440mA
charging, ROM menu: 550mA
D+M monitor, not charging: 170mA
D+M monitor, half charging: 280mA
D+M monitor, full charging: 480mA..550mA
Charging in ROM, 23:17: 260mA
23:21: 245mA
23:25: 230mA
23:34: 205mA
0:08: 100mA
0:29: 80mA, charger LED is off
Charging in ROM, from empty @ 8:35: 610mA
8:38: 555mA
8:45: 545mA
8:50: 540mA
9:01: 540mA
9:18: 530mA
9:36: 520mA
9:45: 505mA
9:51: 480mA
10:15: 365mA
10:48: 250mA
11:01: 225mA
11:31: 180mA
11:38: 170mA
12:48: 80mA, charger LED is off.
Measured @ li-ion battery.
ROM <7mA
Linux 2.6.26 suspend: 7.5mA, 10mA?!
Linux 2.6.26, fully running, charger connected: 50uA :-(
100mA charge
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
reply other threads:[~2009-10-14 11:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091014112200.GA16156@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=Dirk@Opfer-Online.de \
--cc=arminlitzel@web.de \
--cc=dbaryshkov@gmail.com \
--cc=eric.y.miao@gmail.com \
--cc=lenz@cs.wisc.edu \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=metan@ucw.cz \
--cc=omegamoon@gmail.com \
--cc=rmk@arm.linux.org.uk \
--cc=rpurdie@rpsys.net \
--cc=thommycheck@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®