mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Samuel Ortiz <sameo@linux.intel.com>
To: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [PATCH v2] twl4030: Enable low-power mode to 32kHz oscillator
Date: Fri, 23 Oct 2009 16:13:11 +0200	[thread overview]
Message-ID: <20091023141310.GB3718@sortiz.org> (raw)
In-Reply-To: <1256210049-4567-1-git-send-email-ilkka.koskinen@nokia.com>

Hi Ilkka,

On Thu, Oct 22, 2009 at 02:14:09PM +0300, Ilkka Koskinen wrote:
> Allows TWL's 32kHz oscillator to go in low-power mode when
> main battery voltage is running low.
Patch applied, thanks a lot.

Cheers,
Samuel.


> Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
> ---
>  drivers/mfd/twl4030-core.c  |    9 +++++++--
>  include/linux/i2c/twl4030.h |    5 +++++
>  2 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
> index eee5af8..004a8be 100644
> --- a/drivers/mfd/twl4030-core.c
> +++ b/drivers/mfd/twl4030-core.c
> @@ -177,6 +177,7 @@
>  #define HFCLK_FREQ_26_MHZ		(2 << 0)
>  #define HFCLK_FREQ_38p4_MHZ		(3 << 0)
>  #define HIGH_PERF_SQ			(1 << 3)
> +#define CK32K_LOWPWR_EN			(1 << 7)
>  
>  
>  /* chip-specific feature flags, for i2c_device_id.driver_data */
> @@ -681,7 +682,8 @@ static inline int __init unprotect_pm_master(void)
>  	return e;
>  }
>  
> -static void clocks_init(struct device *dev)
> +static void clocks_init(struct device *dev,
> +			struct twl4030_clock_init_data *clock)
>  {
>  	int e = 0;
>  	struct clk *osc;
> @@ -728,6 +730,9 @@ static void clocks_init(struct device *dev)
>  	}
>  
>  	ctrl |= HIGH_PERF_SQ;
> +	if (clock && clock->ck32k_lowpwr_enable)
> +		ctrl |= CK32K_LOWPWR_EN;
> +
>  	e |= unprotect_pm_master();
>  	/* effect->MADC+USB ck en */
>  	e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
> @@ -806,7 +811,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  	inuse = true;
>  
>  	/* setup clock framework */
> -	clocks_init(&client->dev);
> +	clocks_init(&client->dev, pdata->clock);
>  
>  	/* load power event scripts */
>  	if (twl_has_power() && pdata->power)
> diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
> index 4a2fb27..10e68cb 100644
> --- a/include/linux/i2c/twl4030.h
> +++ b/include/linux/i2c/twl4030.h
> @@ -313,6 +313,10 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
>  
>  /*----------------------------------------------------------------------*/
>  
> +struct twl4030_clock_init_data {
> +	bool ck32k_lowpwr_enable;
> +};
> +
>  struct twl4030_bci_platform_data {
>  	int *battery_tmp_tbl;
>  	unsigned int tblsize;
> @@ -407,6 +411,7 @@ extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
>  
>  struct twl4030_platform_data {
>  	unsigned				irq_base, irq_end;
> +	struct twl4030_clock_init_data		*clock;
>  	struct twl4030_bci_platform_data	*bci;
>  	struct twl4030_gpio_platform_data	*gpio;
>  	struct twl4030_madc_platform_data	*madc;
> -- 
> 1.6.0.4
> 

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

      reply	other threads:[~2009-10-23 14:11 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-22 11:14 Ilkka Koskinen
2009-10-23 14:13 ` Samuel Ortiz [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091023141310.GB3718@sortiz.org \
    --to=sameo@linux.intel.com \
    --cc=ilkka.koskinen@nokia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®