From: Suresh Siddha <suresh.b.siddha@intel.com>
To: hpa@zytor.com, mingo@elte.hu, tglx@linutronix.de, ebiederm@xmission.com
Cc: garyhade@us.ibm.com, suresh.b.siddha@intel.com,
linux-kernel@vger.kernel.org
Subject: [patch 3/6] x86: remove move_cleanup_count from irq_cfg
Date: Mon, 26 Oct 2009 14:24:33 -0800 [thread overview]
Message-ID: <20091026230001.752968906@sbs-t61.sc.intel.com> (raw)
In-Reply-To: <20091026222430.313656103@sbs-t61.sc.intel.com>
[-- Attachment #1: remove_move_cleanup_count.patch --]
[-- Type: text/plain, Size: 2935 bytes --]
move_cleanup_count for each irq in irq_cfg is keeping track of the total number
of cpus that need to free the corresponding vectors associated with the irq
which has now been migrated to new destination. As long as this
move_cleanup_count is non-zero (i.e., as long as we have n't freed the vector
allocations on the old destinations) we were preventing the irq's further
migration.
This cleanup count is unnecessary and it is enough to not allow the irq
migration till we send the cleanup vector to the previous irq destination,
for which we already have irq_cfg's move_in_progress. All we need to make
sure is that we free the vector at the old desintation but we don't need
to wait till that gets freed.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
---
arch/x86/include/asm/hw_irq.h | 1 -
arch/x86/kernel/apic/io_apic.c | 9 +--------
2 files changed, 1 insertion(+), 9 deletions(-)
Index: tip/arch/x86/kernel/apic/io_apic.c
===================================================================
--- tip.orig/arch/x86/kernel/apic/io_apic.c
+++ tip/arch/x86/kernel/apic/io_apic.c
@@ -1161,7 +1161,7 @@ __assign_irq_vector(int irq, struct irq_
int cpu, err;
cpumask_var_t tmp_mask;
- if ((cfg->move_in_progress) || cfg->move_cleanup_count)
+ if (cfg->move_in_progress)
return -EBUSY;
if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
@@ -2234,14 +2234,10 @@ void send_cleanup_vector(struct irq_cfg
if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
unsigned int i;
- cfg->move_cleanup_count = 0;
- for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
- cfg->move_cleanup_count++;
for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
} else {
cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
- cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
free_cpumask_var(cleanup_mask);
}
@@ -2430,8 +2426,6 @@ asmlinkage void smp_irq_move_cleanup_int
cfg = irq_cfg(irq);
spin_lock(&desc->lock);
- if (!cfg->move_cleanup_count)
- goto unlock;
if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
goto unlock;
@@ -2449,7 +2443,6 @@ asmlinkage void smp_irq_move_cleanup_int
goto unlock;
}
__get_cpu_var(vector_irq)[vector] = -1;
- cfg->move_cleanup_count--;
unlock:
spin_unlock(&desc->lock);
}
Index: tip/arch/x86/include/asm/hw_irq.h
===================================================================
--- tip.orig/arch/x86/include/asm/hw_irq.h
+++ tip/arch/x86/include/asm/hw_irq.h
@@ -94,7 +94,6 @@ struct irq_cfg {
struct irq_pin_list *irq_2_pin;
cpumask_var_t domain;
cpumask_var_t old_domain;
- unsigned move_cleanup_count;
u8 vector;
u8 move_in_progress : 1;
};
next prev parent reply other threads:[~2009-10-26 22:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-26 22:24 [patch 0/6] x86: cleanups and fixes for irq migration code during cpu offline Suresh Siddha
2009-10-26 22:24 ` [patch 1/6] x86: unify fixup_irqs() for 32-bit and 64-bit kernels Suresh Siddha
2009-11-02 16:16 ` [tip:x86/apic] x86: Unify " tip-bot for Suresh Siddha
2009-10-26 22:24 ` [patch 2/6] x86, intr-remap: Avoid irq_chip mask/unmask in fixup_irqs() for intr-remapping Suresh Siddha
2009-11-02 16:16 ` [tip:x86/apic] " tip-bot for Suresh Siddha
2009-10-26 22:24 ` Suresh Siddha [this message]
2009-11-02 16:17 ` [tip:x86/apic] x86: Remove move_cleanup_count from irq_cfg tip-bot for Suresh Siddha
2009-10-26 22:24 ` [patch 4/6] x86: force irq complete move during cpu offline Suresh Siddha
2009-11-02 16:17 ` [tip:x86/apic] x86: Force " tip-bot for Suresh Siddha
2009-10-26 22:24 ` [RFC patch 5/6] x86: Use EOI register in io-apic on intel platforms Suresh Siddha
2009-11-02 16:17 ` [tip:x86/apic] " tip-bot for Suresh Siddha
2009-11-04 0:53 ` Maciej W. Rozycki
2009-11-04 2:24 ` Suresh Siddha
2009-11-04 23:04 ` Suresh Siddha
2009-11-05 14:46 ` Maciej W. Rozycki
2009-11-06 0:01 ` Suresh Siddha
2009-11-06 6:53 ` Maciej W. Rozycki
2009-11-07 7:27 ` Suresh Siddha
2009-11-08 19:06 ` Maciej W. Rozycki
2009-12-02 0:56 ` Suresh Siddha
2009-10-26 22:24 ` [RFC patch 6/6] x86: remove local_irq_enable()/local_irq_disable() in fixup_irqs() Suresh Siddha
2009-11-02 16:17 ` [tip:x86/apic] x86: Remove " tip-bot for Suresh Siddha
2009-10-30 19:25 ` [patch 0/6] x86: cleanups and fixes for irq migration code during cpu offline Suresh Siddha
2009-11-02 14:59 ` Ingo Molnar
2009-11-02 17:35 ` Gary Hade
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091026230001.752968906@sbs-t61.sc.intel.com \
--to=suresh.b.siddha@intel.com \
--cc=ebiederm@xmission.com \
--cc=garyhade@us.ibm.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®