mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexey Dobriyan <adobriyan@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, isdn@linux-pingi.de,
	mac@melware.de, tilman@imap.cc
Subject: Re: [PATCH] proc_fops: convert drivers/isdn/ to seq_file
Date: Wed, 25 Nov 2009 07:59:14 +0300	[thread overview]
Message-ID: <20091125045914.GA3528@x200.malnet.ru> (raw)
In-Reply-To: <20091124162541.03e7e375.akpm@linux-foundation.org>

On Tue, Nov 24, 2009 at 04:25:41PM -0800, Andrew Morton wrote:
> On Mon, 23 Nov 2009 04:56:25 +0300
> Alexey Dobriyan <adobriyan@gmail.com> wrote:

> linux-next collision:
> 
> drivers/isdn/gigaset/capi.c: In function 'gigaset_isdn_register':
> drivers/isdn/gigaset/capi.c:2259: error: 'struct capi_ctr' has no member named 'ctr_read_proc'

Please, fold into my patch:

--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -2106,35 +2106,22 @@ static char *gigaset_procinfo(struct capi_ctr *ctr)
 	return ctr->name;	/* ToDo: more? */
 }
 
-/**
- * gigaset_ctr_read_proc() - build controller proc file entry
- * @page:	buffer of PAGE_SIZE bytes for receiving the entry.
- * @start:	unused.
- * @off:	unused.
- * @count:	unused.
- * @eof:	unused.
- * @ctr:	controller descriptor structure.
- *
- * Return value: length of generated entry
- */
-static int gigaset_ctr_read_proc(char *page, char **start, off_t off,
-			  int count, int *eof, struct capi_ctr *ctr)
+static int gigaset_proc_show(struct seq_file *m, void *v)
 {
+	struct capi_ctr *ctr = m->private;
 	struct cardstate *cs = ctr->driverdata;
 	char *s;
 	int i;
-	int len = 0;
-	len += sprintf(page+len, "%-16s %s\n", "name", ctr->name);
-	len += sprintf(page+len, "%-16s %s %s\n", "dev",
+
+	seq_printf(m, "%-16s %s\n", "name", ctr->name);
+	seq_printf(m, "%-16s %s %s\n", "dev",
 			dev_driver_string(cs->dev), dev_name(cs->dev));
-	len += sprintf(page+len, "%-16s %d\n", "id", cs->myid);
+	seq_printf(m, "%-16s %d\n", "id", cs->myid);
 	if (cs->gotfwver)
-		len += sprintf(page+len, "%-16s %d.%d.%d.%d\n", "firmware",
+		seq_printf(m, "%-16s %d.%d.%d.%d\n", "firmware",
 			cs->fwver[0], cs->fwver[1], cs->fwver[2], cs->fwver[3]);
-	len += sprintf(page+len, "%-16s %d\n", "channels",
-			cs->channels);
-	len += sprintf(page+len, "%-16s %s\n", "onechannel",
-			cs->onechannel ? "yes" : "no");
+	seq_printf(m, "%-16s %d\n", "channels", cs->channels);
+	seq_printf(m, "%-16s %s\n", "onechannel", cs->onechannel ? "yes" : "no");
 
 	switch (cs->mode) {
 	case M_UNKNOWN:
@@ -2152,7 +2139,7 @@ static int gigaset_ctr_read_proc(char *page, char **start, off_t off,
 	default:
 		s = "??";
 	}
-	len += sprintf(page+len, "%-16s %s\n", "mode", s);
+	seq_printf(m, "%-16s %s\n", "mode", s);
 
 	switch (cs->mstate) {
 	case MS_UNINITIALIZED:
@@ -2176,25 +2163,25 @@ static int gigaset_ctr_read_proc(char *page, char **start, off_t off,
 	default:
 		s = "??";
 	}
-	len += sprintf(page+len, "%-16s %s\n", "mstate", s);
+	seq_printf(m, "%-16s %s\n", "mstate", s);
 
-	len += sprintf(page+len, "%-16s %s\n", "running",
+	seq_printf(m, "%-16s %s\n", "running",
 			cs->running ? "yes" : "no");
-	len += sprintf(page+len, "%-16s %s\n", "connected",
+	seq_printf(m, "%-16s %s\n", "connected",
 			cs->connected ? "yes" : "no");
-	len += sprintf(page+len, "%-16s %s\n", "isdn_up",
+	seq_printf(m, "%-16s %s\n", "isdn_up",
 			cs->isdn_up ? "yes" : "no");
-	len += sprintf(page+len, "%-16s %s\n", "cidmode",
+	seq_printf(m, "%-16s %s\n", "cidmode",
 			cs->cidmode ? "yes" : "no");
 
 	for (i = 0; i < cs->channels; i++) {
-		len += sprintf(page+len, "[%d]%-13s %d\n", i, "corrupted",
+		seq_printf(m, "[%d]%-13s %d\n", i, "corrupted",
 				cs->bcs[i].corrupted);
-		len += sprintf(page+len, "[%d]%-13s %d\n", i, "trans_down",
+		seq_printf(m, "[%d]%-13s %d\n", i, "trans_down",
 				cs->bcs[i].trans_down);
-		len += sprintf(page+len, "[%d]%-13s %d\n", i, "trans_up",
+		seq_printf(m, "[%d]%-13s %d\n", i, "trans_up",
 				cs->bcs[i].trans_up);
-		len += sprintf(page+len, "[%d]%-13s %d\n", i, "chstate",
+		seq_printf(m, "[%d]%-13s %d\n", i, "chstate",
 				cs->bcs[i].chstate);
 		switch (cs->bcs[i].proto2) {
 		case L2_BITSYNC:
@@ -2209,11 +2196,24 @@ static int gigaset_ctr_read_proc(char *page, char **start, off_t off,
 		default:
 			s = "??";
 		}
-		len += sprintf(page+len, "[%d]%-13s %s\n", i, "proto2", s);
+		seq_printf(m, "[%d]%-13s %s\n", i, "proto2", s);
 	}
-	return len;
+	return 0;
 }
 
+static int gigaset_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, gigaset_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations gigaset_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= gigaset_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 
 static struct capi_driver capi_driver_gigaset = {
 	.name		= "gigaset",
@@ -2256,7 +2256,7 @@ int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
 	iif->ctr.release_appl  = gigaset_release_appl;
 	iif->ctr.send_message  = gigaset_send_message;
 	iif->ctr.procinfo      = gigaset_procinfo;
-	iif->ctr.ctr_read_proc = gigaset_ctr_read_proc;
+	iif->ctr.proc_fops = &gigaset_proc_fops;
 	INIT_LIST_HEAD(&iif->appls);
 	skb_queue_head_init(&iif->sendqueue);
 	atomic_set(&iif->sendqlen, 0);

  reply	other threads:[~2009-11-25  4:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-23  1:56 Alexey Dobriyan
2009-11-25  0:25 ` Andrew Morton
2009-11-25  4:59   ` Alexey Dobriyan [this message]
2009-11-30  0:42     ` Tilman Schmidt
2009-11-30 20:17       ` Alexey Dobriyan
2009-12-02  9:01         ` Tilman Schmidt
2009-11-28 12:26 ` Tilman Schmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091125045914.GA3528@x200.malnet.ru \
    --to=adobriyan@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=isdn@linux-pingi.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mac@melware.de \
    --cc=tilman@imap.cc \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome