From: Luotao Fu <l.fu@pengutronix.de>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: rpurdie@rpsys.net, l.fu@pengutronix.de, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] leds: leds-pwm: Set led_classdev max_brightness
Date: Fri, 27 Nov 2009 08:44:17 +0100 [thread overview]
Message-ID: <20091127074417.GA4721@pengutronix.de> (raw)
In-Reply-To: <1259299058-23443-1-git-send-email-lars@metafoo.de>
[-- Attachment #1: Type: text/plain, Size: 2802 bytes --]
Hi Lars-Peter,
On Fri, Nov 27, 2009 at 06:17:38AM +0100, Lars-Peter Clausen wrote:
> Currently the driver leds-pwm doesn't set max_brightness for the led device
> although it's platform data proides a maximum brightness. Instead it stores its
> own private driver struct. The max_brightness defaults to 255 for led device if
> it has not been set.
> As a result any leds-pwm device with a different maximum brightness will show
> incorrect behavior, as it is posible to either set a longer then period duty
> time or not be able to switch the led to full brightness.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Thanks for the patch, however Pls note that the pwm framework has seen
some major changes by Bill Gatliff, including this driver, see
http://lwn.net/Articles/357837/
The patches are pending, but it's quite possible that this driver will
become obsolete soon.
for the patch it self:
Acked-by: Luotao Fu <l.fu@pengutronix.de>
> ---
> drivers/leds/leds-pwm.c | 5 ++---
> 1 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
> index cdfdc87..88b1dd0 100644
> --- a/drivers/leds/leds-pwm.c
> +++ b/drivers/leds/leds-pwm.c
> @@ -27,7 +27,6 @@ struct led_pwm_data {
> struct pwm_device *pwm;
> unsigned int active_low;
> unsigned int period;
> - unsigned int max_brightness;
> };
>
> static void led_pwm_set(struct led_classdev *led_cdev,
> @@ -35,7 +34,7 @@ static void led_pwm_set(struct led_classdev *led_cdev,
> {
> struct led_pwm_data *led_dat =
> container_of(led_cdev, struct led_pwm_data, cdev);
> - unsigned int max = led_dat->max_brightness;
> + unsigned int max = led_dat->cdev.max_brightness;
> unsigned int period = led_dat->period;
>
> if (brightness == 0) {
> @@ -77,10 +76,10 @@ static int led_pwm_probe(struct platform_device *pdev)
> led_dat->cdev.name = cur_led->name;
> led_dat->cdev.default_trigger = cur_led->default_trigger;
> led_dat->active_low = cur_led->active_low;
> - led_dat->max_brightness = cur_led->max_brightness;
> led_dat->period = cur_led->pwm_period_ns;
> led_dat->cdev.brightness_set = led_pwm_set;
> led_dat->cdev.brightness = LED_OFF;
> + led_dat->cdev.max_brightness = cur_led->max_brightness;
> led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
>
> ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
> --
> 1.5.6.5
>
cheers
Luotao Fu
--
Pengutronix e.K. | Dipl.-Ing. Luotao Fu |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
prev parent reply other threads:[~2009-11-27 7:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-27 5:17 Lars-Peter Clausen
2009-11-27 7:44 ` Luotao Fu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091127074417.GA4721@pengutronix.de \
--to=l.fu@pengutronix.de \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®