From: Peter Palfrader <weasel@debian.org>
To: linux-kernel@vger.kernel.org
Cc: DSA <debian-admin@lists.debian.org>
Subject: 2.6.32.1: BUG and panic: unable to handle kernel NULL pointer dereference at 000000000000001f
Date: Tue, 15 Dec 2009 17:27:37 +0100 [thread overview]
Message-ID: <20091215162736.GS13850@anguilla.noreply.org> (raw)
Hi,
we tried to upgrade a couple of our proliant servers from 2.6.31.6 to
2.6.32.1.
On two of our DL385g1 servers we had problems booting 2.6.32.1, as they
paniced.
One of them eventually booted correctly when it was decided to log its
serial console output; that strategy proved unsuccessful with the second
box.
[ 5.304749] BUG: unable to handle kernel NULL pointer dereference at 000000000000001f
..
[ 5.308739] Call Trace:
[ 5.308739] [<ffffffff810c3840>] kstrdup+0x40/0x70
[ 5.308739] [<ffffffff81150d77>] sysfs_new_dirent+0xf7/0x110
[ 5.308739] [<ffffffff8115121d>] create_dir+0x3d/0xc0
[ 5.308739] [<ffffffff81090af1>] ? autoremove_wake_function+0x11/0x40
[ 5.308739] [<ffffffff811512d4>] sysfs_create_dir+0x34/0x50
[ 5.308739] [<ffffffff8138e7ea>] ? kobject_get+0x1a/0x30
[ 5.308739] [<ffffffff8138e961>] kobject_add_internal+0xe1/0x1e0
[ 5.308739] [<ffffffff8138eb78>] kobject_add_varg+0x38/0x60
[ 5.308739] [<ffffffff8138ec15>] kobject_init_and_add+0x75/0x90
[ 5.308739] [<ffffffff81150560>] ? sysfs_ilookup_test+0x0/0x20
[ 5.308739] [<ffffffff8115082d>] ? sysfs_find_dirent+0x2d/0x40
[ 5.308739] [<ffffffff81150ec1>] ? sysfs_addrm_finish+0x21/0x250
[ 5.308739] [<ffffffff8138e7ea>] ? kobject_get+0x1a/0x30
[ 5.308739] [<ffffffff810e6fe4>] ? kmem_cache_alloc+0x84/0xc0
[ 5.308739] [<ffffffff814238d4>] bus_add_driver+0x94/0x260
[ 5.308739] [<ffffffff81424ed9>] driver_register+0x79/0x160
[ 5.308739] [<ffffffff815a28a3>] __hid_register_driver+0x43/0x80
[ 5.308739] [<ffffffff81a3d7ff>] ? gyration_init+0x0/0x1b
[ 5.308739] [<ffffffff81a3d818>] gyration_init+0x19/0x1b
[ 5.308739] [<ffffffff81009048>] do_one_initcall+0x38/0x1a0
[ 5.308739] [<ffffffff81a0e6b5>] kernel_init+0x172/0x1ca
[ 5.308739] [<ffffffff81036a0a>] child_rip+0xa/0x20
[ 5.308739] [<ffffffff81a0e543>] ? kernel_init+0x0/0x1ca
[ 5.308739] [<ffffffff81036a00>] ? child_rip+0x0/0x20
is from the machine that reliably fails to boot.
http://asteria.noreply.org/~weasel/volatile/2009-12-15-1VAB84BxJzE/ravel
hosts the complete serial console output.
What I caught on the second box, that eventually decided to boot is
similar, but not identical:
[ 19.028333] Call Trace:
[ 19.028333] [<ffffffff81150560>] ? sysfs_ilookup_test+0x0/0x20
[ 19.028333] [<ffffffff810c3840>] kstrdup+0x40/0x70
[ 19.028333] [<ffffffff81150d77>] sysfs_new_dirent+0xf7/0x110
[ 19.028333] [<ffffffff81150b17>] ? sysfs_add_one+0x27/0xd0
[ 19.028333] [<ffffffff81151bf7>] sysfs_do_create_link+0x87/0x160
[ 19.028333] [<ffffffff81151cee>] sysfs_create_link+0xe/0x10
[ 19.028333] [<ffffffff81422072>] device_add+0x272/0x730
[ 19.028333] [<ffffffff8139779e>] ? kvasprintf+0x6e/0x90
[ 19.028333] [<ffffffff81422549>] device_register+0x19/0x20
[ 19.028333] [<ffffffff8142262c>] device_create_vargs+0xdc/0xf0
[ 19.028333] [<ffffffff8142268b>] device_create+0x4b/0x50
[ 19.028333] [<ffffffff813e9702>] ? extract_entropy+0xe2/0x140
[ 19.028333] [<ffffffff813f573f>] misc_register+0xbf/0x180
[ 19.028333] [<ffffffff8107a4e0>] ? init_oops_id+0x0/0x40
[ 19.028333] [<ffffffff81a2626b>] ? pm_qos_power_init+0x0/0xe1
[ 19.028333] [<ffffffff81a262a3>] pm_qos_power_init+0x38/0xe1
[ 19.028333] [<ffffffff81009048>] do_one_initcall+0x38/0x1a0
[ 19.028333] [<ffffffff81a0e6b5>] kernel_init+0x172/0x1ca
[ 19.028333] [<ffffffff81036a0a>] child_rip+0xa/0x20
[ 19.028333] [<ffffffff81a0e543>] ? kernel_init+0x0/0x1ca
[ 19.028333] [<ffffffff81036a00>] ? child_rip+0x0/0x20
http://asteria.noreply.org/~weasel/volatile/2009-12-15-1VAB84BxJzE/klecker-bad
http://asteria.noreply.org/~weasel/volatile/2009-12-15-1VAB84BxJzE/klecker-good
for the output during a successful boot.
The config file can be found at
http://asteria.noreply.org/~weasel/volatile/2009-12-15-1VAB84BxJzE/config-2.6.32.1-dsa-amd64
Cheers,
Peter
--
| .''`. ** Debian GNU/Linux **
Peter Palfrader | : :' : The universal
http://www.palfrader.org/ | `. `' Operating System
| `- http://www.debian.org/
next reply other threads:[~2009-12-15 16:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-15 16:27 Peter Palfrader [this message]
2009-12-22 11:47 ` Peter Palfrader
2009-12-22 12:04 ` Andi Kleen
2009-12-22 18:33 ` Peter Palfrader
2009-12-22 18:42 ` Andi Kleen
2009-12-22 19:01 ` Peter Palfrader
2009-12-22 18:57 ` Peter Palfrader
2009-12-24 13:04 ` Peter Palfrader
2009-12-26 17:12 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091215162736.GS13850@anguilla.noreply.org \
--to=weasel@debian.org \
--cc=debian-admin@lists.debian.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®