Re: [ibm-acpi-devel] 2.6.33-rc2: regression: gkrellm no longer shows all the temperatures on thinkpad x60

[Pavel Machek <pavel@ucw.cz>]

On Sun 2009-12-27 23:32:59, Didier Spaier wrote:
> Pavel Machek wrote:
> >On Sun 2009-12-27 23:24:15, Didier Spaier wrote:
> >>Pavel Machek wrote:
> >>>...I'll have to find out where gkrell got that info. It worked in
> >>>2.6.32.
> >>>
> >>>									Pavel
> >>Only to make sure... What is the output of cat /proc/acpi/ibm/thermal?
> >>
> >>I ask that question because I noticed battery temperature 0° displayed  by conky after updating to 2.6.32.2.
> >>Looking at my .conkyrc I saw I tried to display ${smapi_bat_temp 0}
> >but I had forgotten to re-install the tp_smapi module.
> >
> >Uhuh, there's no /proc/acpi/ibm:
> >
> >ls /proc/acpi/ibm         ls: cannot access /proc/acpi/ibm: No
> >such file or directory
> >
> >. I guess that's the problem :-(. Config is:
> >
> >CONFIG_THINKPAD_ACPI=y
> ># CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
> ># CONFIG_THINKPAD_ACPI_DEBUG is not set
> >CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
> >CONFIG_THINKPAD_ACPI_VIDEO=y
> ># CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
> >
> >...so I do not see "enable legacy interface" option.

> bash-3.1$ grep THINKPAD_ACPI /boot/config-2.6.32.2strip
> CONFIG_THINKPAD_ACPI=m
> CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
> CONFIG_THINKPAD_ACPI_DEBUG=y
> CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
> CONFIG_THINKPAD_ACPI_VIDEO=y
> CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
> bash-3.1$
> 
> I suggest you modularize THINKPAD_ACPI.

How would modular version help?

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html