From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>,
Linus Torvalds <torvalds@linux-foundation.org>,
Ivan Kokshaysky <ink@jurassic.park.msu.ru>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Alex Chiang <achiang@hp.com>,
Bjorn Helgaas <bjorn.helgaas@hp.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: Re: [PATCH 03/14] pci: add pci_bridge_release_unused_res and pci_bus_release_unused_bridge_res
Date: Fri, 15 Jan 2010 10:53:05 -0800 [thread overview]
Message-ID: <20100115105305.400cda90@jbarnes-piketon> (raw)
In-Reply-To: <1261522954-12591-4-git-send-email-yinghai@kernel.org>
On Tue, 22 Dec 2009 15:02:23 -0800
Yinghai Lu <yinghai@kernel.org> wrote:
> +static void pci_bridge_release_unused_res(struct pci_bus *bus,
> + unsigned long type)
> +{
> + int idx;
> + bool changed = false;
> + struct pci_dev *dev;
> + struct resource *r;
> + unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
> + IORESOURCE_PREFETCH;
> +
> + dev = bus->self;
> + for (idx = PCI_BRIDGE_RESOURCES; idx <=
> PCI_BRIDGE_RESOURCE_END;
> + idx++) {
> + r = &dev->resource[idx];
> + if ((r->flags & type_mask) != type)
> + continue;
> + if (!r->parent)
> + continue;
> + /*
> + * if there are children under that, we should
> release them
> + * all
> + */
> + release_child_resources(r);
> + if (!release_resource(r)) {
> + dev_printk(KERN_DEBUG, &dev->dev,
> + "resource %d %pR released\n", idx,
> r);
> + /* keep the old size */
> + r->end = resource_size(r) - 1;
> + r->start = 0;
> + r->flags = 0;
> + changed = true;
> + }
> + }
> +
> + if (changed) {
> + if (type & IORESOURCE_PREFETCH) {
> + /* avoiding touch the one without PREF */
> + type = IORESOURCE_PREFETCH;
> + }
> + __pci_setup_bridge(bus, type);
> + }
> +}
Isn't this freeing resources regardless of whether there are children?
If so, shouldn't it just be called pci_bridge_release_resources?
> +
> +/*
> + * try to release pci bridge resources that is from leaf bridge,
> + * so we can allocate big new one later
> + * check:
> + * 0: only release the bridge and only the bridge is leaf
> + * 1: release all down side bridge for third shoot
> + */
> +static void __ref pci_bus_release_unused_bridge_res(struct pci_bus
> *bus,
> + unsigned long
> type,
> + int check_leaf)
> +{
> + struct pci_dev *dev;
> + bool is_leaf_bridge = true;
> +
> + list_for_each_entry(dev, &bus->devices, bus_list) {
> + struct pci_bus *b = dev->subordinate;
> + if (!b)
> + continue;
> +
> + switch (dev->class >> 8) {
> + case PCI_CLASS_BRIDGE_CARDBUS:
> + is_leaf_bridge = false;
> + break;
> +
> + case PCI_CLASS_BRIDGE_PCI:
> + default:
> + is_leaf_bridge = false;
> + if (!check_leaf)
> + pci_bus_release_unused_bridge_res(b,
> type,
> + check_leaf);
> + break;
> + }
> + }
> +
> + /* The root bus? */
> + if (!bus->self)
> + return;
> +
> + switch (bus->self->class >> 8) {
> + case PCI_CLASS_BRIDGE_CARDBUS:
> + break;
> +
> + case PCI_CLASS_BRIDGE_PCI:
> + default:
> + if ((check_leaf && is_leaf_bridge) || !check_leaf)
> + pci_bridge_release_unused_res(bus, type);
> + break;
> + }
> +}
Naming comment applies here too. I'd also rather see the "check_leaf"
flag be an enum, that makes the callers more self documenting. The
enums should probably be called "leaf_only" and "whole_subtree" or
similar , since the function will only release the resources of a leaf
bridge when the former is passed, while the whole bridge and its
subtree will be released in the latter case.
This is starting to look a bit easier to follow though, thanks for your
patience so far.
--
Jesse Barnes, Intel Open Source Technology Center
next prev parent reply other threads:[~2010-01-15 18:53 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-22 23:02 [PATCH 00/14] pci: update pci bridge resources Yinghai Lu
2009-12-22 23:02 ` [PATCH 01/14] pci: separate pci_setup_bridge to small functions Yinghai Lu
2010-01-15 18:54 ` Jesse Barnes
2009-12-22 23:02 ` [PATCH 02/14] resource: add release_child_resources Yinghai Lu
2010-01-15 18:54 ` Jesse Barnes
2009-12-22 23:02 ` [PATCH 03/14] pci: add pci_bridge_release_unused_res and pci_bus_release_unused_bridge_res Yinghai Lu
2010-01-15 18:53 ` Jesse Barnes [this message]
2010-01-16 0:20 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 04/14] pci: don't dump it when bus resource flags is not used Yinghai Lu
2010-01-15 18:54 ` Jesse Barnes
2009-12-22 23:02 ` [PATCH 05/14] pci: add failed_list to record failed one for pci_bus_assign_resources Yinghai Lu
2010-01-15 18:56 ` Jesse Barnes
2010-01-15 21:13 ` Yinghai Lu
2010-01-15 21:41 ` Bjorn Helgaas
2009-12-22 23:02 ` [PATCH 06/14] pci: reject mmio range start from 0 on pci_bridge read Yinghai Lu
2010-01-15 19:19 ` Jesse Barnes
2010-01-15 21:15 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 07/14] pci: don't shrink bridge resources Yinghai Lu
2010-01-15 19:04 ` Jesse Barnes
2010-01-15 21:09 ` Yinghai Lu
2010-01-15 21:31 ` Jesse Barnes
2010-01-16 0:32 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 08/14] pci: update bridge res to get more big range in pci assign unssign Yinghai Lu
2010-01-15 19:12 ` Jesse Barnes
2010-01-15 21:12 ` Yinghai Lu
2010-01-15 21:34 ` Bjorn Helgaas
2010-01-15 21:34 ` Jesse Barnes
2009-12-22 23:02 ` [PATCH 09/14] pci: introduce pci_assign_unassigned_bridge_resources Yinghai Lu
2010-01-13 0:50 ` Kenji Kaneshige
2010-01-13 1:58 ` Yinghai Lu
2010-01-13 7:31 ` Kenji Kaneshige
2010-01-13 7:52 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 10/14] pci: pciehp clean flow in pciehp_configure_device Yinghai Lu
2010-01-15 19:14 ` Jesse Barnes
2010-01-15 21:14 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 11/14] pci: pciehp second try to get big range for pcie devices Yinghai Lu
2009-12-22 23:02 ` [PATCH 12/14] pci: pci_bridge_release_res Yinghai Lu
2009-12-22 23:02 ` [PATCH 13/14] pciehp: add support for bridge resource reallocation Yinghai Lu
2009-12-22 23:02 ` [PATCH 14/14] pci: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges Yinghai Lu
2010-01-08 21:33 ` [PATCH 00/14] pci: update pci bridge resources Patrick Keller
2010-01-11 21:57 ` Patrick Keller
2010-01-12 18:18 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100115105305.400cda90@jbarnes-piketon \
--to=jbarnes@virtuousgeek.org \
--cc=achiang@hp.com \
--cc=bjorn.helgaas@hp.com \
--cc=ink@jurassic.park.msu.ru \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=torvalds@linux-foundation.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®