From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Yongseok Koh <yongseok.koh@samsung.com>,
Nick Piggin <npiggin@suse.de>
Subject: [26/29] vmalloc: remove BUG_ON due to racy counting of VM_LAZY_FREE
Date: Fri, 22 Jan 2010 16:10:10 -0800 [thread overview]
Message-ID: <20100123001113.527587963@mini.kroah.org> (raw)
In-Reply-To: <20100123001145.GA7391@kroah.com>
2.6.32-stable review patch. If anyone has any objections, please let us know.
------------------
From: Yongseok Koh <yongseok.koh@samsung.com>
commit 88f5004430babb836cfce886d5d54c82166f8ba4 upstream.
In free_unmap_area_noflush(), va->flags is marked as VM_LAZY_FREE first, and
then vmap_lazy_nr is increased atomically.
But, in __purge_vmap_area_lazy(), while traversing of vmap_are_list, nr
is counted by checking VM_LAZY_FREE is set to va->flags. After counting
the variable nr, kernel reads vmap_lazy_nr atomically and checks a
BUG_ON condition whether nr is greater than vmap_lazy_nr to prevent
vmap_lazy_nr from being negative.
The problem is that, if interrupted right after marking VM_LAZY_FREE,
increment of vmap_lazy_nr can be delayed. Consequently, BUG_ON
condition can be met because nr is counted more than vmap_lazy_nr.
It is highly probable when vmalloc/vfree are called frequently. This
scenario have been verified by adding delay between marking VM_LAZY_FREE
and increasing vmap_lazy_nr in free_unmap_area_noflush().
Even the vmap_lazy_nr is for checking high watermark, it never be the
strict watermark. Although the BUG_ON condition is to prevent
vmap_lazy_nr from being negative, vmap_lazy_nr is signed variable. So,
it could go down to negative value temporarily.
Consequently, removing the BUG_ON condition is proper.
A possible BUG_ON message is like the below.
kernel BUG at mm/vmalloc.c:517!
invalid opcode: 0000 [#1] SMP
EIP: 0060:[<c04824a4>] EFLAGS: 00010297 CPU: 3
EIP is at __purge_vmap_area_lazy+0x144/0x150
EAX: ee8a8818 EBX: c08e77d4 ECX: e7c7ae40 EDX: c08e77ec
ESI: 000081fe EDI: e7c7ae60 EBP: e7c7ae64 ESP: e7c7ae3c
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Call Trace:
[<c0482ad9>] free_unmap_vmap_area_noflush+0x69/0x70
[<c0482b02>] remove_vm_area+0x22/0x70
[<c0482c15>] __vunmap+0x45/0xe0
[<c04831ec>] vmalloc+0x2c/0x30
Code: 8d 59 e0 eb 04 66 90 89 cb 89 d0 e8 87 fe ff ff 8b 43 20 89 da 8d 48 e0 8d 43 20 3b 04 24 75 e7 fe 05 a8 a5 a3 c0 e9 78 ff ff ff <0f> 0b eb fe 90 8d b4 26 00 00 00 00 56 89 c6 b8 ac a5 a3 c0 31
EIP: [<c04824a4>] __purge_vmap_area_lazy+0x144/0x150 SS:ESP 0068:e7c7ae3c
[ See also http://marc.info/?l=linux-kernel&m=126335856228090&w=2 ]
Signed-off-by: Yongseok Koh <yongseok.koh@samsung.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
mm/vmalloc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -555,10 +555,8 @@ static void __purge_vmap_area_lazy(unsig
}
rcu_read_unlock();
- if (nr) {
- BUG_ON(nr > atomic_read(&vmap_lazy_nr));
+ if (nr)
atomic_sub(nr, &vmap_lazy_nr);
- }
if (nr || force_flush)
flush_tlb_kernel_range(*start, *end);
next prev parent reply other threads:[~2010-01-23 0:21 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-23 0:11 [00/29] 2.6.32.6 stable review Greg KH
2010-01-23 0:09 ` [01/29] x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers Greg KH
2010-01-23 0:09 ` [02/29] V4L/DVB (13900): gspca - sunplus: Fix bridge exchanges Greg KH
2010-01-23 0:09 ` [03/29] Staging: asus_oled: fix oops in 2.6.32.2 Greg KH
2010-01-23 0:09 ` [04/29] Staging: hv: fix smp problems in the hyperv core code Greg KH
2010-01-23 0:09 ` [05/29] tty: fix race in tty_fasync Greg KH
2010-01-23 0:09 ` [06/29] ecryptfs: use after free Greg KH
2010-01-23 0:09 ` [07/29] ecryptfs: initialize private persistent file before dereferencing pointer Greg KH
2010-01-23 0:09 ` [08/29] nozomi: quick fix for the close/close bug Greg KH
2010-01-23 0:09 ` [09/29] serial: 8250_pnp: use wildcard for serial Wacom tablets Greg KH
2010-01-23 0:09 ` [10/29] usb: serial: fix memory leak in generic driver Greg KH
2010-01-23 0:09 ` [11/29] USB: fix bitmask merge error Greg KH
2010-01-23 0:09 ` [12/29] USB: Dont use GFP_KERNEL while we cannot reset a storage device Greg KH
2010-01-23 0:09 ` [13/29] USB: EHCI: fix handling of unusual interrupt intervals Greg KH
2010-01-23 0:09 ` [14/29] USB: EHCI & UHCI: fix race between root-hub suspend and port resume Greg KH
2010-01-23 0:09 ` [15/29] USB: add missing delay during remote wakeup Greg KH
2010-01-23 0:10 ` [16/29] USB: add speed values for USB 3.0 and wireless controllers Greg KH
2010-01-23 0:10 ` [17/29] ACPI: EC: Accelerate query execution Greg KH
2010-01-23 0:10 ` [18/29] ACPI: EC: Add wait for irq storm Greg KH
2010-01-23 0:10 ` [19/29] SCSI: enclosure: fix oops while iterating enclosure_status array Greg KH
2010-01-23 0:10 ` [20/29] drm/i915: Read the response after issuing DDC bus switch command Greg KH
2010-01-23 0:10 ` [21/29] drm/i915: try another possible DDC bus for the SDVO device with multiple outputs Greg KH
2010-01-23 0:10 ` [22/29] block: bdev_stack_limits wrapper Greg KH
2010-01-23 0:10 ` [23/29] DM: Fix device mapper topology stacking Greg KH
2010-01-23 0:10 ` [24/29] x86/PCI/PAT: return EINVAL for pci mmap WC request for !pat_enabled Greg KH
2010-01-23 0:10 ` [25/29] USB: fix usbstorage for 2770:915d delivers no FAT Greg KH
2010-01-23 2:43 ` [Stable-review] " Ben Hutchings
2010-01-23 6:05 ` Greg KH
2010-01-23 0:10 ` Greg KH [this message]
2010-01-23 0:10 ` [27/29] perf timechart: Use tid not pid for COMM change Greg KH
2010-01-23 0:10 ` [28/29] perf events: Dont report side-band events on each cpu for per-task-per-cpu events Greg KH
2010-01-23 11:38 ` [Stable-review] " Stefan Bader
2010-01-23 15:33 ` Greg KH
2010-01-25 18:04 ` Greg KH
2010-01-23 0:10 ` [29/29] perf: Honour event state for aux stream data Greg KH
2010-01-24 7:21 ` [stable] [00/29] 2.6.32.6 stable review Andrew Morton
2010-01-24 16:29 ` Thomas Gleixner
2010-01-25 8:40 ` Ozan Çağlayan
2010-01-25 17:16 ` Greg KH
2010-01-25 17:39 ` Ozan Çağlayan
2010-01-25 17:46 ` Greg KH
2010-01-25 19:09 ` Greg KH
2010-01-25 18:22 ` Thomas Gleixner
2010-01-25 17:15 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100123001113.527587963@mini.kroah.org \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=npiggin@suse.de \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=yongseok.koh@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®