From: Ingo Molnar <mingo@elte.hu>
To: Dave Airlie <airlied@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Alex Deucher <alexdeucher@gmail.com>,
Dave Airlie <airlied@linux.ie>,
Matthew Garrett <mjg59@srcf.ucam.org>,
linux-kernel@vger.kernel.org, dri-devel@lists.sf.net
Subject: Re: hung bootup with "drm/radeon/kms: move radeon KMS on/off switch out of staging."
Date: Thu, 4 Feb 2010 21:27:35 +0100 [thread overview]
Message-ID: <20100204202735.GB24716@elte.hu> (raw)
In-Reply-To: <21d7e9971002041134m7e4d1a8dif65ccee8b7fbc203@mail.gmail.com>
* Dave Airlie <airlied@gmail.com> wrote:
> On Fri, Feb 5, 2010 at 5:24 AM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
> >
> >
> > On Thu, 4 Feb 2010, Alex Deucher wrote:
> >>
> >> And if it crashes, he'll report a bug and we'll fix it.
> >
> > Ok, you have a bug-report. See earlier in the thread:
> >
> >> btw., i just found another bug activated via this same commit, a boot hang
> >> after DRM init:
> >>
> >> [ ? ?9.858352] [drm] Connector 1:
> >> [ ? ?9.861417] [drm] ? DVI-I
> >> [ ? ?9.864031] [drm] ? HPD1
> >> [ ? ?9.866562] [drm] ? DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
> >> [ ? ?9.872579] [drm] ? Encoders:
> >> [ ? ?9.875540] [drm] ? ? CRT2: INTERNAL_DAC2
> >> [ ? ?9.879541] [drm] ? ? DFP1: INTERNAL_TMDS1
> >> [ ? ?9.883646] [drm] Connector 2:
> >> [ ? ?9.886695] [drm] ? S-video
> >> [ ? ?9.889483] [drm] ? Encoders:
> >> [ ? ?9.892463] [drm] ? ? TV1: INTERNAL_DAC2
> >> [ ? ?9.896392] i2c i2c-0: master_xfer[0] W, addr=0x50, len=1
> >> [ ? ?9.901796] i2c i2c-0: master_xfer[1] R, addr=0x50, len=128
> >> [ ? ?9.909246] i2c i2c-0: NAK from device addr 0x50 msg #0
> >> [ ? ?9.914564] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1
> >> [ ? ?9.919957] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128
> >> [ ? ?9.927413] i2c i2c-1: NAK from device addr 0x50 msg #0
> >
> > So can we get it fixed, please?
>
> Ingo,
>
> got the full dmesg?
Yes, see my report in this thread. Full bootlog up to the hang (serial
captured) was attached, alongside the kernel config.
> and lspci -vvnn
Attached below.
> the bug reporting needs work, this snippet hasn't the useful info in it.
Linus quoted only the relevant portion of my full bugreport. All the other
info is in the full mail he quoted.
Ingo
------------------>
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a3)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at dc00 [size=32]
Region 4: I/O ports at 4c00 [size=64]
Region 5: I/O ports at 4c40 [size=64]
Capabilities: <access denied>
00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at da102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:812a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at da101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=128
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: da000000-da0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:8141]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at da100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at d000 [size=8]
Capabilities: <access denied>
00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] [1002:5b60] (prog-if 00 [VGA])
Subsystem: PC Partner Limited Unknown device [174b:0500]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at b000 [size=256]
Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d8000000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV370 [Radeon X300SE] [1002:5b70]
Subsystem: PC Partner Limited Unknown device [174b:0501]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at d9010000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: <access denied>
05:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at da000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
next prev parent reply other threads:[~2010-02-04 20:27 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-01 2:20 [git pull] drm fixes Dave Airlie
2010-02-01 2:53 ` Dave Airlie
2010-02-02 8:17 ` [crash, PATCH] Revert "drm/radeon/kms: move radeon KMS on/off switch out of staging." Ingo Molnar
2010-02-02 8:25 ` Dave Airlie
2010-02-02 15:44 ` Ingo Molnar
2010-02-04 20:39 ` Dave Airlie
2010-02-04 20:46 ` Ingo Molnar
2010-02-04 21:14 ` Dave Airlie
2010-02-05 0:43 ` Dave Airlie
2010-02-05 7:32 ` Ingo Molnar
2010-02-02 8:35 ` Dave Airlie
2010-02-02 8:37 ` Dave Airlie
2010-02-02 15:42 ` Ingo Molnar
2010-02-02 15:46 ` Ingo Molnar
2010-02-02 20:34 ` Dave Airlie
2010-02-04 6:26 ` Ingo Molnar
2010-02-04 6:39 ` Dave Airlie
2010-02-04 7:36 ` Ingo Molnar
2010-02-04 7:49 ` Dave Airlie
2010-02-04 7:17 ` hung bootup with " Ingo Molnar
2010-02-04 16:48 ` Matthew Garrett
2010-02-04 17:08 ` Ingo Molnar
2010-02-04 17:15 ` Linus Torvalds
2010-02-04 17:36 ` Ingo Molnar
2010-02-04 17:36 ` Matthew Garrett
2010-02-04 17:54 ` Ingo Molnar
2010-02-04 17:59 ` Matthew Garrett
2010-02-04 18:12 ` Ingo Molnar
2010-02-04 18:15 ` Matthew Garrett
2010-02-04 18:56 ` Ingo Molnar
2010-02-04 19:00 ` Matthew Garrett
2010-02-04 19:19 ` Ingo Molnar
2010-02-04 19:28 ` Jerome Glisse
2010-02-04 20:34 ` Ingo Molnar
2010-02-04 18:30 ` Alex Deucher
2010-02-04 19:06 ` Ingo Molnar
2010-02-04 19:18 ` Alex Deucher
2010-02-04 19:24 ` Linus Torvalds
2010-02-04 19:34 ` Dave Airlie
2010-02-04 20:27 ` Ingo Molnar [this message]
2010-02-04 19:32 ` Ingo Molnar
2010-02-04 19:53 ` Jesse Barnes
2010-02-04 20:22 ` Ingo Molnar
2010-02-04 20:27 ` david
2010-02-04 20:33 ` Jesse Barnes
2010-02-04 20:57 ` Ingo Molnar
2010-02-04 20:48 ` Matthew Garrett
2010-02-04 21:05 ` Ingo Molnar
2010-02-04 21:09 ` Matthew Garrett
2010-02-05 7:56 ` Ingo Molnar
2010-02-05 8:34 ` Dave Airlie
2010-02-05 9:00 ` Ingo Molnar
2010-02-05 9:18 ` Dave Airlie
2010-02-05 10:47 ` Ingo Molnar
2010-02-04 21:23 ` Andrew Morton
2010-02-04 21:34 ` Jesse Barnes
2010-02-04 21:35 ` Dave Airlie
2010-02-06 11:10 ` Felipe Contreras
2010-02-02 8:58 ` [crash, PATCH] Revert " Domenico Andreoli
2010-02-02 11:59 ` Jerome Glisse
2010-02-02 15:11 ` Domenico Andreoli
2010-02-02 11:56 ` Jerome Glisse
2010-02-02 15:42 ` Ingo Molnar
2010-02-02 23:15 ` Jerome Glisse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100204202735.GB24716@elte.hu \
--to=mingo@elte.hu \
--cc=airlied@gmail.com \
--cc=airlied@linux.ie \
--cc=alexdeucher@gmail.com \
--cc=dri-devel@lists.sf.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg59@srcf.ucam.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®