From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757250Ab0BKVMQ (ORCPT ); Thu, 11 Feb 2010 16:12:16 -0500 Received: from lnx500.hrz.tu-darmstadt.de ([130.83.156.225]:34934 "EHLO lnx500.hrz.tu-darmstadt.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757236Ab0BKVMM (ORCPT ); Thu, 11 Feb 2010 16:12:12 -0500 From: ST To: Robert Hancock Subject: Re: 2.6.33-rc7 problems Date: Thu, 11 Feb 2010 22:11:51 +0100 User-Agent: KMail/1.12.4 (Linux/2.6.33-rc7-00025-g08c4f1b; KDE/4.3.4; x86_64; ; ) Cc: linux-kernel@vger.kernel.org References: <201002092306.07449.st@iss.tu-darmstadt.de> <4B7354D9.50909@gmail.com> In-Reply-To: <4B7354D9.50909@gmail.com> MIME-Version: 1.0 Message-Id: <201002112211.51177.st@iss.tu-darmstadt.de> Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-PMX-TU: seen v0.99a by 5.5.9.388399, Antispam-Engine: 2.7.2.376379, Antispam-Data: 2010.2.11.205722 X-PMX-SPAMCHECK: outgoing mail Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Robert Thanks for your reply. > Well, the card reader apparently reports medium not present.. is there > anything in there? how is it not working? Well thats exactly the problem since there is a CF Card plugged into the reader. I just checked with Fedora 12 and 2.6.31. The output there looks like this (and i am 100% sure its not an HW error. Since i plugged out the USB plug not the CF card an use the same USB port while dualbooting): usb 1-4.3: SerialNumber: 058F63646476 usb 1-4.3: configuration #1 chosen from 1 choice scsi9 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 7 usb-storage: waiting for device to settle before scanning generic-usb: probe of 0003:058F:6364.0004 failed with error -22 usb-storage: device scan complete scsi 9:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 scsi 9:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 scsi 9:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 scsi 9:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS sd 9:0:0:0: Attached scsi generic sg3 type 0 sd 9:0:0:1: Attached scsi generic sg4 type 0 sd 9:0:0:2: Attached scsi generic sg5 type 0 sd 9:0:0:3: Attached scsi generic sg6 type 0 sd 9:0:0:3: [sdf] Attached SCSI removable disk sd 9:0:0:1: [sdd] 15858864 512-byte logical blocks: (8.11 GB/7.56 GiB) With my config it stops with : scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 So either some CF Card stuff is missing (old ata stuff needed?) or there is some other SCSI stuff going on i don't understand... Since the device scan with my strange config never completes it never has any devices to offer... I also checked with 2.6.32 with my config. Same bad result, so i guess it is not a regression. Best regards ST