From: Jesse Barnes <jbarnes@virtuousgeek.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git pull] PCI changes for 2.6.34
Date: Fri, 26 Feb 2010 09:39:57 -0800 [thread overview]
Message-ID: <20100226093957.7b99d09c@jbarnes-piketon> (raw)
The following changes since commit
bee415ce427d1eab6cfb30221461c7d20cbf1903: Linus Torvalds (1):
Merge branch 'perf-fixes-for-linus' of
git://git.kernel.org/.../tip/linux-2.6-tip
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 linux-next
There are a few somewhat scary bits in this request:
- Bjorn's _CRS data changes
- Yinghai's resource reallocation code
- Rafael's runtime PM code
If you recall, we tried to enable _CRS last release and it caused
trouble, in particular because our existing code couldn't handle the
number of resources provided by some _CRS implementations. Bjorn's
fixed that though, and added code to use _CRS data by default on any
machine made in 2008 or later, which allows it to fix some existing
bugs on machines where pci=use_crs was previously required. Other bugs
requiring the old intel_bus.c code are also fixed by using _CRS by
default, now that the affected machines are running with production
firmware.
Yinghai's code also affects resource allocation. His patchset will
evaluate the resource tree at boot time looking for devices whose
resources couldn't be enabled because their upstream bridge window
wasn't large enough. If it find any, it'll free the associated
resources and re-try, attempting to get a large enough bridge window to
enable affected leaf devices. If that fails, it'll recurse higher into
the resource tree. With luck, it'll manage to make our resource
allocation code more effective by overriding over conservative BIOS
settings and giving Linux access to more device resources.
Finally there's Rafael's PM code. It should be in pretty good shape
now. There may be a few more ACPI changes on the way, but it's seen a
lot of testing in previous iterations, and has seen a lot of review as
well, so hopefully it won't cause any big problems.
Shortlog and diffstat below.
Thanks,
Jesse
Andrew Morton (1):
PCI hotplug: check ioremap() return value in ibmphp_ebda.c
Bjorn Helgaas (5):
PCI: split up pci_read_bridge_bases()
PCI: read bridge windows before filling in subtractive decode resources
PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs
PCI: augment bus resource table with a list
x86/PCI: use host bridge _CRS info by default on 2008 and newer machines
Chandru (1):
PCI hotplug: ibmphp: read the length of ebda and map entire ebda region
Dominik Brodowski (2):
resource/PCI: align functions now return start of resource
resource/PCI: mark struct resource as const
Jesse Barnes (1):
PCI hotplug: remove obsolete usage of get_bus_speed from rpaphp hotplug ops
Jiri Slaby (2):
PCI hotplug: fix memory leaks
PCI: hotplug/cpcihp, fix pci device refcounting
Kenji Kaneshige (3):
PCI: mark is_pcie obsolete
PCIe PME: use pci_is_pcie()
PCIe PME: use pci_pcie_cap()
Matthew Wilcox (7):
PCI: Rewrite pci_scan_slot
PCI: Unify pcie_link_speed and pci_bus_speed
PCI: Make current and maximum bus speeds part of the PCI core
PCI: Add support for detection of PCIe and PCI-X bus speeds
PCI: Add support for AGP in cur/max bus speed
PCI: Add support for reporting PCIe 3.0 speeds
PCI: Make pci_scan_slot more robust
Rafael J. Wysocki (10):
PCI: Clean up build for CONFIG_PCI_QUIRKS unset
PCI PM: Add function for checking PME status of devices
PCI PM: PCIe PME root port service driver
PCI PM: Make it possible to force using INTx for PCIe PME signaling
ACPI: Use GPE reference counting to support shared GPEs
ACPI / PM: Add more run-time wake-up fields
ACPI / ACPICA: Multiple system notify handlers per device
PCI / ACPI / PM: Platform support for PCI PME wake-up
PCI PM: Run-time callbacks for PCI bus type
ACPI: Use GPE reference counting to support shared GPEs
Randy Dunlap (1):
PCI hotplug: fix ibmphp build error
Seth Heasley (1):
x86/PCI: irq and pci_ids patch for Intel Cougar Point DeviceIDs
Thomas Gleixner (1):
x86/PCI: Prevent mmconfig memory corruption
Tilman Schmidt (1):
PCI: push deprecated pci_find_device() function to last user
Yinghai Lu (12):
PCI: separate pci_setup_bridge to small functions
resource: add release_child_resources
PCI: don't dump resource when bus resource flags indicates unused
PCI: add pci_bridge_release_resources and pci_bus_release_bridge_resources
PCI: add failed_list to pci_bus_assign_resources
PCI: reject mmio ranges starting at 0 on pci_bridge read
PCI: don't shrink bridge resources
PCI: update bridge resources to get more big ranges in PCI assign unssigned
PCI: introduce pci_assign_unassigned_bridge_resources
PCI: pciehp: cleanup flow in pciehp_configure_device
PCI: pciehp: second try to get big range for pcie devices
PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges
Documentation/kernel-parameters.txt | 16 +-
arch/alpha/kernel/pci.c | 6 +-
arch/arm/kernel/bios32.c | 8 +-
arch/cris/arch-v32/drivers/pci/bios.c | 16 +-
arch/frv/mb93090-mb00/pci-frv.c | 16 +-
arch/ia64/include/asm/acpi.h | 1 +
arch/ia64/pci/pci.c | 22 +-
arch/mips/pci/pci.c | 6 +-
arch/mips/pmc-sierra/yosemite/ht.c | 10 +-
arch/mn10300/unit-asb2305/pci-asb2305.c | 16 +-
arch/mn10300/unit-asb2305/pci.c | 6 +-
arch/parisc/kernel/pci.c | 10 +-
arch/powerpc/kernel/pci-common.c | 24 +-
arch/powerpc/platforms/fsl_uli1575.c | 12 +-
arch/sh/drivers/pci/pci.c | 6 +-
arch/sparc/kernel/pci.c | 5 +-
arch/sparc/kernel/pcic.c | 5 +-
arch/x86/include/asm/pci_x86.h | 1 +
arch/x86/pci/acpi.c | 82 +++--
arch/x86/pci/bus_numa.c | 3 +-
arch/x86/pci/bus_numa.h | 3 +-
arch/x86/pci/common.c | 3 +
arch/x86/pci/i386.c | 14 +-
arch/x86/pci/irq.c | 2 +
arch/x86/pci/mmconfig-shared.c | 17 +-
arch/xtensa/kernel/pci.c | 15 +-
drivers/acpi/acpica/acevents.h | 10 +-
drivers/acpi/acpica/aclocal.h | 2 +
drivers/acpi/acpica/acobject.h | 2 +
drivers/acpi/acpica/evgpe.c | 161 ++---------
drivers/acpi/acpica/evgpeblk.c | 87 ++----
drivers/acpi/acpica/evmisc.c | 12 +-
drivers/acpi/acpica/evxface.c | 189 +++++++++---
drivers/acpi/acpica/evxfevnt.c | 96 +++++--
drivers/acpi/button.c | 15 +-
drivers/acpi/ec.c | 28 ++-
drivers/acpi/internal.h | 2 -
drivers/acpi/pci_bind.c | 14 +-
drivers/acpi/pci_root.c | 9 +
drivers/acpi/scan.c | 38 ++-
drivers/acpi/sleep.c | 15 +-
drivers/acpi/system.c | 4 +-
drivers/acpi/wakeup.c | 84 ++----
drivers/isdn/hisax/Kconfig | 18 +-
drivers/isdn/hisax/avm_pci.c | 6 +-
drivers/isdn/hisax/bkm_a4t.c | 2 +-
drivers/isdn/hisax/bkm_a8.c | 2 +-
drivers/isdn/hisax/diva.c | 14 +-
drivers/isdn/hisax/elsa.c | 8 +-
drivers/isdn/hisax/enternow_pci.c | 2 +-
drivers/isdn/hisax/gazel.c | 8 +-
drivers/isdn/hisax/hfc_pci.c | 2 +-
drivers/isdn/hisax/hisax.h | 23 ++
drivers/isdn/hisax/niccy.c | 6 +-
drivers/isdn/hisax/nj_s.c | 2 +-
drivers/isdn/hisax/nj_u.c | 2 +-
drivers/isdn/hisax/sedlbauer.c | 6 +-
drivers/isdn/hisax/telespci.c | 2 +-
drivers/isdn/hisax/w6692.c | 2 +-
drivers/pci/Kconfig | 11 -
drivers/pci/Makefile | 5 +-
drivers/pci/bus.c | 56 ++++-
drivers/pci/hotplug/acpiphp_core.c | 2 -
drivers/pci/hotplug/cpcihp_generic.c | 1 +
drivers/pci/hotplug/cpqphp.h | 2 -
drivers/pci/hotplug/cpqphp_core.c | 57 +---
drivers/pci/hotplug/cpqphp_ctrl.c | 27 +-
drivers/pci/hotplug/ibmphp_core.c | 106 ++-----
drivers/pci/hotplug/ibmphp_ebda.c | 13 +-
drivers/pci/hotplug/ibmphp_hpc.c | 1 +
drivers/pci/hotplug/pci_hotplug_core.c | 132 --------
drivers/pci/hotplug/pciehp_core.c | 25 --
drivers/pci/hotplug/pciehp_ctrl.c | 1 +
drivers/pci/hotplug/pciehp_hpc.c | 72 +----
drivers/pci/hotplug/pciehp_pci.c | 23 +-
drivers/pci/hotplug/rpaphp_core.c | 24 +-
drivers/pci/hotplug/shpchp.h | 2 -
drivers/pci/hotplug/shpchp_core.c | 35 ---
drivers/pci/hotplug/shpchp_ctrl.c | 14 +-
drivers/pci/hotplug/shpchp_hpc.c | 149 +++++-----
drivers/pci/hotplug/shpchp_sysfs.c | 9 +-
drivers/pci/legacy.c | 34 --
drivers/pci/pci-acpi.c | 211 +++++++++++++
drivers/pci/pci-driver.c | 160 ++++++++--
drivers/pci/pci.c | 157 +++++++++-
drivers/pci/pci.h | 16 +
drivers/pci/pcie/Kconfig | 4 +
drivers/pci/pcie/Makefile | 2 +
drivers/pci/pcie/pme/Makefile | 8 +
drivers/pci/pcie/pme/pcie_pme.c | 505 ++++++++++++++++++++++++++++++
drivers/pci/pcie/pme/pcie_pme.h | 28 ++
drivers/pci/pcie/pme/pcie_pme_acpi.c | 54 ++++
drivers/pci/pcie/portdrv.h | 17 +
drivers/pci/pcie/portdrv_core.c | 12 +-
drivers/pci/pcie/portdrv_pci.c | 27 ++
drivers/pci/probe.c | 292 ++++++++++++++++--
drivers/pci/quirks.c | 14 +-
drivers/pci/setup-bus.c | 506 +++++++++++++++++++++++++++----
drivers/pci/slot.c | 55 ++++
drivers/pcmcia/rsrc_mgr.c | 13 +-
drivers/pcmcia/rsrc_nonstatic.c | 25 +-
drivers/pcmcia/yenta_socket.c | 5 +-
include/acpi/acpi_bus.h | 6 +
include/acpi/acpi_drivers.h | 1 +
include/acpi/acpixf.h | 6 +-
include/acpi/actypes.h | 28 +--
include/linux/ioport.h | 7 +-
include/linux/pci-acpi.h | 7 +
include/linux/pci.h | 109 +++++--
include/linux/pci_hotplug.h | 41 +---
include/linux/pci_ids.h | 3 +
kernel/power/Kconfig | 5 +
kernel/resource.c | 44 +++-
113 files changed, 3007 insertions(+), 1360 deletions(-)
delete mode 100644 drivers/pci/legacy.c
create mode 100644 drivers/pci/pcie/pme/Makefile
create mode 100644 drivers/pci/pcie/pme/pcie_pme.c
create mode 100644 drivers/pci/pcie/pme/pcie_pme.h
create mode 100644 drivers/pci/pcie/pme/pcie_pme_acpi.c
--
Jesse Barnes, Intel Open Source Technology Center
next reply other threads:[~2010-02-26 17:39 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-26 17:39 Jesse Barnes [this message]
2010-02-28 20:34 ` Linus Torvalds
2010-02-28 20:46 ` Linus Torvalds
2010-02-28 21:11 ` Yinghai
2010-02-28 21:19 ` Linus Torvalds
2010-02-28 22:41 ` Yinghai Lu
2010-02-28 23:49 ` [git pull] PCI changes for 2.6.34 - pci rom rom fail list Yinghai Lu
2010-03-01 6:28 ` Jesse Barnes
2010-03-01 16:05 ` Linus Torvalds
2010-03-01 16:35 ` Jesse Barnes
2010-03-01 17:38 ` Jesse Barnes
2010-02-28 23:51 ` [git pull] PCI changes for 2.6.34 -- pci_try_num Yinghai Lu
2010-03-01 1:16 ` [git pull] PCI changes for 2.6.34 Arjan van de Ven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100226093957.7b99d09c@jbarnes-piketon \
--to=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®