mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Randy Dunlap <randy.dunlap@oracle.com>
To: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>, Ingo Molnar <mingo@elte.hu>,
	Thomas Gleixner <tglx@linutronix.de>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Pekka Enberg <penberg@cs.helsinki.fi>,
	Peter Jones <pjones@redhat.com>,
	Konrad Rzeszutek Wilk <konrad@kernel.org>,
	Jan Beulich <jbeulich@novell.com>
Subject: Re: [PATCH -v2] ibft, x86: Change reserve_ibft_region() to find_ibft_region()
Date: Thu, 1 Apr 2010 14:54:48 -0700	[thread overview]
Message-ID: <20100401145448.31e56d0e.randy.dunlap@oracle.com> (raw)
In-Reply-To: <4BB510FB.80601@kernel.org>

On Thu, 01 Apr 2010 14:32:43 -0700 Yinghai Lu wrote:

> 
> 
> So arch code could decide the way to reserve the ibft.
> 
> And We should reserve ibft as early as possible, instead of BOOTMEM stage,
> in case the table is in RAM range and is not reserved by BIOS.
> 
> move that just sfter find_smp_config()
> 
> Also when CONFIG_NO_BOOTMEM=y, We will not have reserve_bootmem() anymorea
> 
> -v2: fix typo about ibft pointed by Konrad Rzeszutek Wilk <konrad@darnok.org>


> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> Cc: Pekka Enberg <penberg@cs.helsinki.fi>
> Cc: Peter Jones <pjones@redhat.com>
> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
> CC: Jan Beulich <jbeulich@novell.com>
> 
> ---
>  arch/x86/kernel/setup.c            |   14 ++++++++++++--
>  drivers/firmware/iscsi_ibft_find.c |   11 ++++++++---
>  include/linux/iscsi_ibft.h         |    8 ++++++--
>  3 files changed, 26 insertions(+), 7 deletions(-)
> 
> Index: linux-2.6/arch/x86/kernel/setup.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/setup.c
> +++ linux-2.6/arch/x86/kernel/setup.c
> @@ -608,6 +608,16 @@ static int __init setup_elfcorehdr(char
>  early_param("elfcorehdr", setup_elfcorehdr);
>  #endif
>  
> +static __init void reserve_ibft_region(void)
> +{
> +	unsigned long addr, size = 0;
> +
> +	addr = find_ibft_region(&size);
> +
> +	if (size)
> +		reserve_early_overlap_ok(addr, addr + size, "ibft");

	where is the correction?


> +}
> +
>  #ifdef CONFIG_X86_RESERVE_LOW_64K
>  static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
>  {
> @@ -910,6 +920,8 @@ void __init setup_arch(char **cmdline_p)
>  	 */
>  	find_smp_config();
>  
> +	reserve_ibft_region();
> +
>  	reserve_trampoline_memory();
>  
>  #ifdef CONFIG_ACPI_SLEEP
> @@ -977,8 +989,6 @@ void __init setup_arch(char **cmdline_p)
>  
>  	dma32_reserve_bootmem();
>  
> -	reserve_ibft_region();
> -
>  #ifdef CONFIG_KVM_CLOCK
>  	kvmclock_init();
>  #endif
> Index: linux-2.6/drivers/firmware/iscsi_ibft_find.c
> ===================================================================
> --- linux-2.6.orig/drivers/firmware/iscsi_ibft_find.c
> +++ linux-2.6/drivers/firmware/iscsi_ibft_find.c
> @@ -52,7 +52,7 @@ EXPORT_SYMBOL_GPL(ibft_addr);
>   * Routine used to find the iSCSI Boot Format Table. The logical
>   * kernel address is set in the ibft_addr global variable.
>   */
> -void __init reserve_ibft_region(void)
> +unsigned long __init find_ibft_region(unsigned long *sizep)
>  {
>  	unsigned long pos;
>  	unsigned int len = 0;
> @@ -78,6 +78,11 @@ void __init reserve_ibft_region(void)
>  			}
>  		}
>  	}
> -	if (ibft_addr)
> -		reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT);
> +	if (ibft_addr) {
> +		*sizep = PAGE_ALIGN(len);
> +		return pos;
> +	}
> +
> +	*sizep = 0;
> +	return 0;
>  }
> Index: linux-2.6/include/linux/iscsi_ibft.h
> ===================================================================
> --- linux-2.6.orig/include/linux/iscsi_ibft.h
> +++ linux-2.6/include/linux/iscsi_ibft.h
> @@ -42,9 +42,13 @@ extern struct ibft_table_header *ibft_ad
>   * mapped address is set in the ibft_addr variable.
>   */
>  #ifdef CONFIG_ISCSI_IBFT_FIND
> -extern void __init reserve_ibft_region(void);
> +unsigned long find_ibft_region(unsigned long *sizep);
>  #else
> -static inline void reserve_ibft_region(void) { }
> +static inline unsigned long find_ibft_region(unsigned long *sizep)
> +{
> +	*sizep = 0;
> +	return 0;
> +}
>  #endif
>  
>  #endif /* ISCSI_IBFT_H */
> --


---
~Randy

  reply	other threads:[~2010-04-01 21:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-01  2:07 [PATCH] " Yinghai Lu
2010-04-01 20:12 ` Konrad Rzeszutek Wilk
2010-04-01 20:59   ` Yinghai Lu
2010-04-01 21:32 ` [PATCH -v2] " Yinghai Lu
2010-04-01 21:54   ` Randy Dunlap [this message]
2010-04-01 22:00     ` Yinghai Lu
2010-04-01 22:03       ` Randy Dunlap
2010-04-01 23:51   ` [tip:x86/urgent] " tip-bot for Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100401145448.31e56d0e.randy.dunlap@oracle.com \
    --to=randy.dunlap@oracle.com \
    --cc=hpa@zytor.com \
    --cc=jbeulich@novell.com \
    --cc=konrad@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=penberg@cs.helsinki.fi \
    --cc=pjones@redhat.com \
    --cc=tglx@linutronix.de \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome