From: Dominik Brodowski <linux@dominikbrodowski.net>
To: torvalds@osdl.org, akpm@osdl.org
Cc: linux-pcmcia@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [git pull] PCMCIA updates for 2.6.35
Date: Wed, 19 May 2010 08:41:49 +0200 [thread overview]
Message-ID: <20100519064149.GA5755@comet.dominikbrodowski.net> (raw)
Linus,
several PCMCIA updates for 2.6.35 are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git master
Please pull from that location. The diffstat and list of changes is below,
the individual diffs are sent (at least) to the linux-pcmcia list.
This patch series also includes the removal of the PCMCIA ioctl Kconfig
option for ARM (acd200bf, see also commit a3f916f2 which went in last time).
So far, only Russell King has spoken out against this; a few days ago he
repeated his opposition.[1] Attempts to resolve this issue still haven't
been successful[2]. If it turns out that a PCMCIA ioctl indeed is still
needed (or we need a cut-down PCMCIA ioctl, and have sufficient information
on what is needed), the Kconfig option may need to be re-enabled before
2.6.35 is released.
In any case, I'll only push patches removing actual PCMCIA ioctl code during
the next merge window.
[1] http://readlist.com/lists/vger.kernel.org/linux-kernel/159/798284.html
[2] http://readlist.com/lists/vger.kernel.org/linux-kernel/159/798290.html
Thanks,
Dominik
Dominik Brodowski (21):
pcmcia: remove unused IRQ modification feature
pcmcia: setup IRQ to be used by PCMCIA drivers at card insert
pcmcia: replace struct irq with uint pcmcia_irq in struct pcmcia_socket
pcmcia: pass FORCED_PULSE parameter in pcmcia_request_configuration()
pcmcia: re-work pcmcia_request_irq()
pcmcia: clean up cs.h
pcmcia: dev_node removal (write-only drivers)
pcmcia: dev_node removal (drivers with updated printk call)
pcmcia: dev_node removal (drivers with unregister_netdev check)
pcmcia: dev_node removal (remaining drivers)
pcmcia: dev_node removal (core)
pcmcia: move high level CIS access code to separate file
pcmcia: move all pcmcia_resource_ops providers into one module
pcmcia: clarify alloc_io_space, move it to resource handlers
pcmcia: do not autoadd root PCI bus resources
pcmcia: remove unused mem_op.h
pcmcia: remove pcmcia_add_device_lock
pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held
pcmcia: remove suspend-related comment from yenta_socket.c
pata_pcmcia: get rid of extra indirection
pcmcia: disable PCMCIA ioctl also for ARM
Javier Martinez Canillas (7):
drivers/staging/comedi: dev_node removal (cb_das16_cs)
drivers/staging/comedi: dev_node removal (das08_cs)
drivers/staging/comedi: dev_node removal (ni_daq_700)
drivers/staging/comedi: dev_node removal (ni_daq_dio24)
drivers/staging/comedi: dev_node removal (ni_labpc_cs)
drivers/staging/comedi: dev_node removal (ni_mio_cs)
drivers/staging/comedi: dev_node removal (quatech_daqp_cs)
Tejun Heo (1):
pcmcia: update gfp/slab.h includes
Documentation/pcmcia/driver-changes.txt | 13 +
drivers/ata/pata_pcmcia.c | 47 +--
drivers/bluetooth/bluecard_cs.c | 11 +-
drivers/bluetooth/bt3c_cs.c | 11 +-
drivers/bluetooth/btuart_cs.c | 11 +-
drivers/bluetooth/dtl1_cs.c | 11 +-
drivers/char/pcmcia/cm4000_cs.c | 9 +-
drivers/char/pcmcia/cm4040_cs.c | 5 -
drivers/char/pcmcia/ipwireless/main.c | 19 +-
drivers/char/pcmcia/ipwireless/main.h | 1 -
drivers/char/pcmcia/ipwireless/tty.c | 19 +-
drivers/char/pcmcia/ipwireless/tty.h | 3 +-
drivers/char/pcmcia/synclink_cs.c | 22 +-
drivers/ide/ide-cs.c | 20 +-
drivers/isdn/hardware/avm/avm_cs.c | 76 +---
drivers/isdn/hisax/avma1_cs.c | 63 +--
drivers/isdn/hisax/elsa_cs.c | 40 +--
drivers/isdn/hisax/sedlbauer_cs.c | 60 +--
drivers/isdn/hisax/teles_cs.c | 50 +--
drivers/mtd/maps/pcmciamtd.c | 3 -
drivers/net/pcmcia/3c574_cs.c | 15 +-
drivers/net/pcmcia/3c589_cs.c | 16 +-
drivers/net/pcmcia/axnet_cs.c | 21 +-
drivers/net/pcmcia/com20020_cs.c | 29 +-
drivers/net/pcmcia/fmvj18x_cs.c | 18 +-
drivers/net/pcmcia/ibmtr_cs.c | 16 +-
drivers/net/pcmcia/nmclan_cs.c | 14 +-
drivers/net/pcmcia/pcnet_cs.c | 16 +-
drivers/net/pcmcia/smc91c92_cs.c | 17 +-
drivers/net/pcmcia/xirc2ps_cs.c | 36 +--
drivers/net/wireless/airo_cs.c | 72 +---
drivers/net/wireless/atmel_cs.c | 70 +---
drivers/net/wireless/b43/pcmcia.c | 5 +-
drivers/net/wireless/hostap/hostap_cs.c | 38 +-
drivers/net/wireless/libertas/if_cs.c | 21 +-
drivers/net/wireless/orinoco/orinoco_cs.c | 27 +-
drivers/net/wireless/orinoco/spectrum_cs.c | 27 +-
drivers/net/wireless/ray_cs.c | 15 +-
drivers/net/wireless/ray_cs.h | 1 -
drivers/net/wireless/wl3501.h | 1 -
drivers/net/wireless/wl3501_cs.c | 23 +-
drivers/parport/parport_cs.c | 13 +-
drivers/pcmcia/Kconfig | 22 +-
drivers/pcmcia/Makefile | 9 +-
drivers/pcmcia/bfin_cf_pcmcia.c | 2 +-
drivers/pcmcia/cardbus.c | 1 -
drivers/pcmcia/cistpl.c | 121 +----
drivers/pcmcia/cs.c | 1 -
drivers/pcmcia/cs_internal.h | 22 +-
drivers/pcmcia/ds.c | 34 +-
drivers/pcmcia/omap_cf.c | 2 +-
drivers/pcmcia/pcmcia_cis.c | 356 ++++++++++++
drivers/pcmcia/pcmcia_ioctl.c | 23 +-
drivers/pcmcia/pcmcia_resource.c | 634 ++++++----------------
drivers/pcmcia/rsrc_iodyn.c | 172 ++++++
drivers/pcmcia/rsrc_mgr.c | 112 +----
drivers/pcmcia/rsrc_nonstatic.c | 164 +++++--
drivers/pcmcia/yenta_socket.c | 7 -
drivers/scsi/pcmcia/aha152x_stub.c | 9 +-
drivers/scsi/pcmcia/fdomain_stub.c | 9 +-
drivers/scsi/pcmcia/nsp_cs.c | 23 +-
drivers/scsi/pcmcia/nsp_cs.h | 1 -
drivers/scsi/pcmcia/qlogic_stub.c | 13 +-
drivers/scsi/pcmcia/sym53c500_cs.c | 9 +-
drivers/serial/serial_cs.c | 36 +-
drivers/ssb/main.c | 2 +-
drivers/staging/comedi/drivers/cb_das16_cs.c | 45 +--
drivers/staging/comedi/drivers/das08_cs.c | 35 +-
drivers/staging/comedi/drivers/ni_daq_700.c | 42 +--
drivers/staging/comedi/drivers/ni_daq_dio24.c | 42 +--
drivers/staging/comedi/drivers/ni_labpc_cs.c | 42 +--
drivers/staging/comedi/drivers/ni_mio_cs.c | 19 +-
drivers/staging/comedi/drivers/quatech_daqp_cs.c | 45 +--
drivers/staging/netwave/netwave_cs.c | 9 +-
drivers/staging/wavelan/wavelan_cs.c | 15 +-
drivers/staging/wlags49_h2/wl_cs.c | 9 +-
drivers/telephony/ixj_pcmcia.c | 3 -
drivers/usb/host/sl811_cs.c | 28 +-
include/pcmcia/cs.h | 19 +-
include/pcmcia/ds.h | 29 +-
include/pcmcia/mem_op.h | 116 ----
include/pcmcia/ss.h | 7 +-
sound/pcmcia/pdaudiocf/pdaudiocf.c | 12 +-
sound/pcmcia/pdaudiocf/pdaudiocf.h | 1 -
sound/pcmcia/vx/vxpocket.c | 10 +-
sound/pcmcia/vx/vxpocket.h | 1 -
86 files changed, 1179 insertions(+), 2139 deletions(-)
create mode 100644 drivers/pcmcia/pcmcia_cis.c
create mode 100644 drivers/pcmcia/rsrc_iodyn.c
delete mode 100644 include/pcmcia/mem_op.h
reply other threads:[~2010-05-19 6:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100519064149.GA5755@comet.dominikbrodowski.net \
--to=linux@dominikbrodowski.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pcmcia@lists.infradead.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®