From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Takashi Iwai <tiwai@suse.de>
Subject: [14/34] ALSA: ice1724 - Fix ESI Maya44 capture source control
Date: Mon, 24 May 2010 15:59:46 -0700 [thread overview]
Message-ID: <20100524230350.595491347@clark.site> (raw)
In-Reply-To: <20100524230418.GA12770@kroah.com>
2.6.34-stable review patch. If anyone has any objections, please let us know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit 8213466596bf10b75887754773ee13c10cf86f5c upstream.
The capture source control of maya44 was wrongly coded with the bit
shift instead of the bit mask. Also, the slot for line-in was
wrongly assigned (slot 5 instead of 4).
Reported-by: Alex Chernyshoff <alexdsp@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
sound/pci/ice1712/maya44.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/sound/pci/ice1712/maya44.c
+++ b/sound/pci/ice1712/maya44.c
@@ -347,7 +347,7 @@ static int maya_gpio_sw_put(struct snd_k
/* known working input slots (0-4) */
#define MAYA_LINE_IN 1 /* in-2 */
-#define MAYA_MIC_IN 4 /* in-5 */
+#define MAYA_MIC_IN 3 /* in-4 */
static void wm8776_select_input(struct snd_maya44 *chip, int idx, int line)
{
@@ -393,8 +393,8 @@ static int maya_rec_src_put(struct snd_k
int changed;
mutex_lock(&chip->mutex);
- changed = maya_set_gpio_bits(chip->ice, GPIO_MIC_RELAY,
- sel ? GPIO_MIC_RELAY : 0);
+ changed = maya_set_gpio_bits(chip->ice, 1 << GPIO_MIC_RELAY,
+ sel ? (1 << GPIO_MIC_RELAY) : 0);
wm8776_select_input(chip, 0, sel ? MAYA_MIC_IN : MAYA_LINE_IN);
mutex_unlock(&chip->mutex);
return changed;
next prev parent reply other threads:[~2010-05-24 23:14 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-24 23:04 [00/34] 2.6.32.14-stable review Greg KH
2010-05-24 22:59 ` [01/34] ipv4: udp: fix short packet and bad checksum logging Greg KH
2010-05-25 7:08 ` Bjørn Mork
2010-05-25 14:06 ` Greg KH
2010-05-24 22:59 ` [02/34] hp_accel: fix race in device removal Greg KH
2010-05-24 22:59 ` [03/34] fbdev: bfin-t350mcqb-fb: fix fbmem allocation with blanking lines Greg KH
2010-05-24 22:59 ` [04/34] hugetlbfs: kill applications that use MAP_NORESERVE with SIGBUS instead of OOM-killer Greg KH
2010-05-24 22:59 ` [05/34] dma-mapping: fix dma_sync_single_range_* Greg KH
2010-05-24 22:59 ` [06/34] ACPI: sleep: eliminate duplicate entries in acpisleep_dmi_table[] Greg KH
2010-05-24 22:59 ` [07/34] mmc: atmel-mci: fix two parameters swapped Greg KH
2010-05-24 22:59 ` [08/34] mmc: atmel-mci: prevent kernel oops while removing card Greg KH
2010-05-24 22:59 ` [09/34] mmc: atmel-mci: remove data error interrupt after xfer Greg KH
2010-05-24 22:59 ` [10/34] [S390] ptrace: fix return value of do_syscall_trace_enter() Greg KH
2010-05-24 22:59 ` [11/34] powerpc/perf_event: Fix oops due to perf_event_do_pending call Greg KH
2010-05-24 22:59 ` [12/34] cifs: guard against hardlinking directories Greg KH
2010-05-24 22:59 ` [13/34] serial: imx.c: fix CTS trigger level lower to avoid lost chars Greg KH
2010-05-24 22:59 ` Greg KH [this message]
2010-05-24 22:59 ` [15/34] ALSA: hda: Fix 0 dB for Lenovo models using Conexant CX20549 (Venice) Greg KH
2010-05-24 22:59 ` [16/34] inotify: race use after free/double free in inotify inode marks Greg KH
2010-05-24 22:59 ` [17/34] inotify: dont leak user struct on inotify release Greg KH
2010-05-24 22:59 ` [18/34] profile: fix stats and data leakage Greg KH
2010-05-24 22:59 ` [19/34] x86, k8: Fix build error when K8_NB is disabled Greg KH
2010-05-24 23:13 ` H. Peter Anvin
2010-05-24 23:26 ` Greg KH
2010-05-24 22:59 ` [20/34] x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments Greg KH
2010-05-24 23:13 ` H. Peter Anvin
2010-05-24 23:25 ` Greg KH
2010-05-24 22:59 ` [21/34] x86, amd: Check X86_FEATURE_OSVW bit before accessing OSVW MSRs Greg KH
2010-05-24 23:20 ` H. Peter Anvin
2010-05-24 22:59 ` [22/34] Btrfs: check for read permission on src file in the clone ioctl Greg KH
2010-05-24 22:59 ` [23/34] ALSA: hda - New Intel HDA controller Greg KH
2010-05-24 22:59 ` [24/34] proc: partially revert "procfs: provide stack information for threads" Greg KH
2010-05-24 22:59 ` [25/34] revert "procfs: provide stack information for threads" and its fixup commits Greg KH
2010-05-24 22:59 ` [26/34] iwlwifi: clear all the stop_queue flag after load firmware Greg KH
2010-05-24 22:59 ` [27/34] p54: disable channels with incomplete calibration data sets Greg KH
2010-05-24 23:00 ` [28/34] CacheFiles: Fix error handling in cachefiles_determine_cache_security() Greg KH
2010-05-24 23:00 ` [29/34] [SCSI] megaraid_sas: fix for 32bit apps Greg KH
2010-05-24 23:00 ` [30/34] mmap_min_addr check CAP_SYS_RAWIO only for write Greg KH
2010-05-24 23:00 ` [31/34] nilfs2: fix sync silent failure Greg KH
2010-05-24 23:00 ` [32/34] Revert "ath9k: fix lockdep warning when unloading module" on stable kernels Greg KH
2010-05-24 23:00 ` [33/34] crypto: authenc - Add EINPROGRESS check Greg KH
2010-05-24 23:00 ` [34/34] Revert "parisc: Set PCI CLS early in boot." Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100524230350.595491347@clark.site \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=tiwai@suse.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome