From: Jiri Olsa <jolsa@redhat.com>
To: David Howells <dhowells@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>,
linux-kernel@vger.kernel.org,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Subject: Re: [PATCH] cred - synchronize rcu before releasing cred
Date: Fri, 25 Jun 2010 08:55:27 -0400 [thread overview]
Message-ID: <20100625125527.GA3187@jolsa.bos.redhat.com> (raw)
In-Reply-To: <20100619120101.GA2043@jolsa.colubris.lan>
hi,
do I need to send this some one/place else?
not sure it's going to be picked up..
thanks,
jirka
On Sat, Jun 19, 2010 at 02:01:02PM +0200, Jiri Olsa wrote:
> On Fri, Jun 18, 2010 at 12:50:40AM +0100, David Howells wrote:
> > Jiri Olsa <jolsa@redhat.com> wrote:
> >
> > > maybe I have better solution...
> > >
> > > I think there's no need to get the cred refference as long as
> > > the 'cred' handling stays inside the rcu_read_lock block.
> >
> > I think this is right. There should be no need for a synchronize_rcu() call
> > to be added in commit_creds() with this as commit_creds() calls put_cred()
> > which will defer the destruction until the RCU grace period is up anyway.
> >
> > Whilst I'd prefer to call get_cred() in task_state(), as you point out (and I
> > hadn't considered), this may see an cred struct that has been detached from
> > its pointer on another CPU and had its usage count reduced to 0.
> >
> > In such a case, we can't simply increment the count and then decrement it
> > again later as it's already on the RCU destruction queue and can't necessarily
> > be removed so that it can be added back in.
> >
> > What could be done, though I'm not sure it's worth it, is to use
> > atomic_inc_not_zero() and loop around if the cred struct has gone out of
> > service when we try and access it and reread the pointer.
> >
> > The advantage of this would be that we could manage to hold the RCU read lock
> > for as little time as possible.
> >
> > Acked-by: David Howells <dhowells@redhat.com>
>
> thanks,
>
> in case the there's need for some consistent comment :)
> patch stays
>
> wbr,
> jirka
>
>
>
> ---
> BZ 591015 - kernel BUG at kernel/cred.c:168
> https://bugzilla.redhat.com/show_bug.cgi?id=591015
>
> Above bugzilla reported bug during the releasing of
> old cred structure.
>
> There is reproducer attached to the bugzilla.
>
> The issue is caused by releasing old cred struct while other
> kernel path might be still using it. This leads to cred->usage
> inconsistency inside the __put_cred and triggering the bug.
>
> Following kernel paths are affected:
>
> The CPU1 path is setting the new groups creds.
> The CPU2 path is cat /proc/PID/status
>
>
> CPU 1 CPU 2
>
> sys_setgroups proc_pid_status
> set_current_groups task_state
> commit_creds rcu_read_lock
> put_cred ...
> __put_cred get_cred
> BUG_ON(usage != 0) ...
> rcu_read_unlock
>
>
>
> If __put_cred got executed during the CPU2 holding the reference
> the BUG_ON inside __put_cred is trigered.
>
> I think there's no need to get the cred refference as long as
> the 'cred' handling stays inside the rcu_read_lock block.
>
> And the condition of __task_cred 'make sure task doesn't go away',
> is done by proc_single_show as this is the proc file.
>
> wbr,
> jirka
>
>
> Signed-off-by: Jiri Olsa <jolsa@redhat.com>
> ---
> diff --git a/fs/proc/array.c b/fs/proc/array.c
> index 9b58d38..ac3b3a4 100644
> --- a/fs/proc/array.c
> +++ b/fs/proc/array.c
> @@ -176,7 +176,7 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
> if (tracer)
> tpid = task_pid_nr_ns(tracer, ns);
> }
> - cred = get_cred((struct cred *) __task_cred(p));
> + cred = __task_cred(p);
> seq_printf(m,
> "State:\t%s\n"
> "Tgid:\t%d\n"
> @@ -199,15 +199,14 @@ static inline void task_state(struct seq_file *m, struct pid_namespace *ns,
> "FDSize:\t%d\n"
> "Groups:\t",
> fdt ? fdt->max_fds : 0);
> - rcu_read_unlock();
>
> group_info = cred->group_info;
> task_unlock(p);
>
> for (g = 0; g < min(group_info->ngroups, NGROUPS_SMALL); g++)
> seq_printf(m, "%d ", GROUP_AT(group_info, g));
> - put_cred(cred);
>
> + rcu_read_unlock();
> seq_printf(m, "\n");
> }
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2010-06-25 12:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-16 12:24 Jiri Olsa
2010-06-16 12:45 ` Eric Dumazet
2010-06-16 12:57 ` Jiri Olsa
2010-06-16 13:10 ` Eric Dumazet
2010-06-16 16:08 ` Jiri Olsa
2010-06-17 23:50 ` David Howells
2010-06-19 12:01 ` Jiri Olsa
2010-06-25 12:55 ` Jiri Olsa [this message]
2010-06-25 13:28 ` David Howells
2010-06-25 13:33 Jiri Olsa
2010-07-02 12:14 ` Jiri Olsa
2010-07-27 15:50 Jiri Olsa
2010-07-27 16:16 ` Linus Torvalds
2010-07-27 16:46 ` David Howells
2010-07-27 17:56 ` Linus Torvalds
2010-07-28 8:25 ` Jiri Olsa
2010-07-28 12:07 ` David Howells
2010-07-28 12:47 ` David Howells
2010-07-29 6:00 ` Paul E. McKenney
2010-07-29 8:34 ` David Howells
2010-07-30 21:32 ` Paul E. McKenney
2010-07-28 13:17 ` David Howells
2010-07-28 14:46 ` Jiri Olsa
2010-07-29 9:38 ` Jiri Olsa
2010-07-28 15:51 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100625125527.GA3187@jolsa.bos.redhat.com \
--to=jolsa@redhat.com \
--cc=dhowells@redhat.com \
--cc=eric.dumazet@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®