From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
To: axboe@kernel.dk
Cc: akpm@linux-foundation.org, mikem@beardog.cce.hp.com,
linux-kernel@vger.kernel.org, brace@beardog.cce.hp.com
Subject: [PATCH 08/26] cciss: factor out cciss_find_cfgtables
Date: Mon, 19 Jul 2010 13:45:21 -0500 [thread overview]
Message-ID: <20100719184521.7908.18837.stgit@beardog.cce.hp.com> (raw)
In-Reply-To: <20100719184141.7908.26971.stgit@beardog.cce.hp.com>
From: Stephen M. Cameron <scameron@beardog.cce.hp.com>
cciss: factor out cciss_find_cfgtables
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
drivers/block/cciss.c | 68 +++++++++++++++++++++++++------------------------
1 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 286c81d..c297d31 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4041,13 +4041,40 @@ static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
return -ENODEV;
}
+static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
+{
+ u64 cfg_offset;
+ u32 cfg_base_addr;
+ u64 cfg_base_addr_index;
+ u32 trans_offset;
+
+ /* get the address index number */
+ cfg_base_addr = readl(h->vaddr + SA5_CTCFG_OFFSET);
+ cfg_base_addr &= (u32) 0x0000ffff;
+ cfg_base_addr_index = find_PCI_BAR_index(h->pdev, cfg_base_addr);
+ if (cfg_base_addr_index == -1) {
+ dev_warn(&h->pdev->dev, "cannot find cfg_base_addr_index\n");
+ return -ENODEV;
+ }
+ cfg_offset = readl(h->vaddr + SA5_CTMEM_OFFSET);
+ h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
+ cfg_base_addr_index) + cfg_offset,
+ sizeof(h->cfgtable));
+ if (!h->cfgtable)
+ return -ENOMEM;
+ /* Find performant mode table. */
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
+ cfg_base_addr_index)+cfg_offset+trans_offset,
+ sizeof(*h->transtable));
+ if (!h->transtable)
+ return -ENOMEM;
+ return 0;
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
- __u64 cfg_offset;
- __u32 cfg_base_addr;
- __u64 cfg_base_addr_index;
- __u32 trans_offset;
- int i, prod_index, err;
+ int prod_index, err;
prod_index = cciss_lookup_board_id(c->pdev, &c->board_id);
if (prod_index < 0)
@@ -4090,36 +4117,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
err = cciss_wait_for_board_ready(c);
if (err)
goto err_out_free_res;
-
- /* get the address index number */
- cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET);
- cfg_base_addr &= (__u32) 0x0000ffff;
-#ifdef CCISS_DEBUG
- printk("cfg base address = %x\n", cfg_base_addr);
-#endif /* CCISS_DEBUG */
- cfg_base_addr_index = find_PCI_BAR_index(c->pdev, cfg_base_addr);
-#ifdef CCISS_DEBUG
- printk("cfg base address index = %llx\n",
- (unsigned long long)cfg_base_addr_index);
-#endif /* CCISS_DEBUG */
- if (cfg_base_addr_index == -1) {
- printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
- err = -ENODEV;
+ err = cciss_find_cfgtables(c);
+ if (err)
goto err_out_free_res;
- }
-
- cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
-#ifdef CCISS_DEBUG
- printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
-#endif /* CCISS_DEBUG */
- c->cfgtable = remap_pci_mem(pci_resource_start(c->pdev,
- cfg_base_addr_index) +
- cfg_offset, sizeof(CfgTable_struct));
- /* Find performant mode table. */
- trans_offset = readl(&(c->cfgtable->TransMethodOffset));
- c->transtable = remap_pci_mem(pci_resource_start(c->pdev,
- cfg_base_addr_index) + cfg_offset+trans_offset,
- sizeof(*c->transtable));
#ifdef CCISS_DEBUG
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
next prev parent reply other threads:[~2010-07-19 18:39 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-19 18:44 [PATCH 00/26] cciss updates July 19, 2010 Stephen M. Cameron
2010-07-19 18:44 ` [PATCH 01/26] cciss: Set the performant mode bit in the scsi half of the driver Stephen M. Cameron
2010-07-19 18:44 ` [PATCH 02/26] cciss: save pdev pointer in per hba structure early to avoid passing it around so much Stephen M. Cameron
2010-07-19 18:44 ` [PATCH 03/26] cciss: factor out cciss_lookup_board_id Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 04/26] cciss: factor out cciss_board_disabled Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 05/26] cciss: remove board_id parameter from cciss_interrupt_mode() Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 06/26] cciss: factor out cciss_find_memory_BAR() Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 07/26] cciss: factor out cciss_wait_for_board_ready() Stephen M. Cameron
2010-07-19 18:45 ` Stephen M. Cameron [this message]
2010-07-19 18:45 ` [PATCH 09/26] cciss: fix leak of ioremapped memory Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 10/26] cciss: factor out cciss_find_board_params Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 11/26] cciss: factor out CISS_signature_present() Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 12/26] cciss: factor out cciss_enable_scsi_prefetch() Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 13/26] cciss: factor out cciss_p600_dma_prefetch_quirk() Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 14/26] cciss: cleanup some debug ifdefs Stephen M. Cameron
2010-07-19 18:45 ` [PATCH 15/26] cciss: make cciss_put_controller_into_performant_mode as __devinit Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 16/26] cciss: factor out cciss_wait_for_mode_change_ack() Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 17/26] cciss: factor out cciss_enter_performant_mode Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 18/26] cciss: factor out cciss_find_cfg_addrs Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 19/26] cciss: factor out cciss_reset_devices() Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 20/26] cciss: fix hard reset code Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 21/26] cciss: sanitize max commands Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 22/26] cciss: forbid hard reset of 640x boards Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 23/26] cciss: use consistent variable names Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 24/26] cciss: separate cmd_alloc() and cmd_special_alloc() Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 25/26] cciss: change printks to dev_warn, etc Stephen M. Cameron
2010-07-19 18:46 ` [PATCH 26/26] cciss: cleanup interrupt_not_for_us Stephen M. Cameron
2010-07-21 2:05 ` [PATCH 00/26] cciss updates July 19, 2010 Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100719184521.7908.18837.stgit@beardog.cce.hp.com \
--to=scameron@beardog.cce.hp.com \
--cc=akpm@linux-foundation.org \
--cc=axboe@kernel.dk \
--cc=brace@beardog.cce.hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mikem@beardog.cce.hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome