mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Fenghua Yu <fenghua.yu@intel.com>
To: Jan Beulich <JBeulich@novell.com>
Cc: "Yu, Fenghua" <fenghua.yu@intel.com>,
	"khali@linux-fr.org" <khali@linux-fr.org>,
	"r.marek@assembler.cz" <r.marek@assembler.cz>,
	"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] x86/hwmon: register alternate sibling upon CPU removal
Date: Tue, 14 Sep 2010 17:19:49 -0700	[thread overview]
Message-ID: <20100915001949.GB1237@fenghua-desk.sc.intel.com> (raw)
In-Reply-To: <4C8E17A90200007800015AE6@vpn.id2.novell.com>

On Mon, Sep 13, 2010 at 03:23:05AM -0700, Jan Beulich wrote:
> Just like pkgtemp registers another core of the same package when one
> gets removed, coretemp should register another hyperthread (if
> available) in that situation.
> 
> As pointed out in the patch fixing the respective code in pkgtemp, the
> list protectng mutex must be dropped before calling
> coretemp_device_add(), and due to the restructured loop (including an
> explicit return) the "safe" variant of the list iterator isn't needed
> anymore.
> 
> Signed-off-by: Jan Beulich <jbeulich@novell.com>
> Cc: Rudolf Marek <r.marek@assembler.cz>
> 
> ---
>  drivers/hwmon/coretemp.c |   22 +++++++++++++++-------
>  1 file changed, 15 insertions(+), 7 deletions(-)
> 
> --- linux-2.6.36-rc4/drivers/hwmon/coretemp.c	2010-09-13 08:45:02.000000000 +0200
> +++ 2.6.36-rc4-x86-coretemp-remove-deadlock/drivers/hwmon/coretemp.c	2010-09-03 17:54:14.000000000 +0200
> @@ -482,14 +482,22 @@ exit:
>  
>  static void coretemp_device_remove(unsigned int cpu)
>  {
> -	struct pdev_entry *p, *n;
> +	struct pdev_entry *p;
> +	unsigned int i;
> +
>  	mutex_lock(&pdev_list_mutex);
> -	list_for_each_entry_safe(p, n, &pdev_list, list) {
> -		if (p->cpu == cpu) {
> -			platform_device_unregister(p->pdev);
> -			list_del(&p->list);
> -			kfree(p);
> -		}
> +	list_for_each_entry(p, &pdev_list, list) {
> +		if (p->cpu != cpu)
> +			continue;
> +
> +		platform_device_unregister(p->pdev);
> +		list_del(&p->list);
> +		mutex_unlock(&pdev_list_mutex);
> +		kfree(p);
> +		for_each_cpu(i, cpu_sibling_mask(cpu))
> +			if (i != cpu && !coretemp_device_add(i))
> +				break;
> +		return;
>  	}
>  	mutex_unlock(&pdev_list_mutex);
>  }
> 
> 
> 

I sent a patch to fix this issue before. I'll push it to Linus.

BTW, you patch won't be compiled in UP mode.

Thanks.

-Fenghua

From: Fenghua Yu <fenghua.yu@intel.com>

In current coretemp driver, when a CPU in dev_list is hot-removed, although its
HT sibling is still running, its core sensor is gone and not available to user
level application any more.

When a CPU is hot-removed, its core sensor should be still available to upper
level application as long as the hot-removed CPU's HT sibling is still running.
A core sensor is invisible to user level only when all of siblings in a core are
hot-removed.

This patch fixes this issue.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 drivers/hwmon/coretemp.c |   25 ++++++++++++++++++++++---
 1 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index c070c97..2257cc4 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -418,7 +418,7 @@ struct pdev_entry {
 static LIST_HEAD(pdev_list);
 static DEFINE_MUTEX(pdev_list_mutex);
 
-static int __cpuinit coretemp_device_add(unsigned int cpu)
+static int coretemp_device_add(unsigned int cpu)
 {
 	int err;
 	struct platform_device *pdev;
@@ -483,15 +483,34 @@ exit:
 static void coretemp_device_remove(unsigned int cpu)
 {
 	struct pdev_entry *p, *n;
-	mutex_lock(&pdev_list_mutex);
+#ifdef CONFIG_SMP
+	int s;
+#endif
+
 	list_for_each_entry_safe(p, n, &pdev_list, list) {
 		if (p->cpu == cpu) {
+			mutex_lock(&pdev_list_mutex);
 			platform_device_unregister(p->pdev);
 			list_del(&p->list);
 			kfree(p);
+			mutex_unlock(&pdev_list_mutex);
+
+#ifdef CONFIG_SMP
+			/*
+			 * Add removed CPU's HT sibling to dev_list.
+			 * If there is no sibling available, the core sensor
+			 * is invisiable to user space any more.
+			 */
+			for_each_cpu(s, cpu_sibling_mask(cpu)) {
+				if (s != cpu) {
+					coretemp_device_add(s);
+					break;
+				}
+			}
+#endif
+			return;
 		}
 	}
-	mutex_unlock(&pdev_list_mutex);
 }
 
 static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb,
-- 
1.6.0.3


      reply	other threads:[~2010-09-15  0:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-13 10:23 Jan Beulich
2010-09-15  0:19 ` Fenghua Yu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100915001949.GB1237@fenghua-desk.sc.intel.com \
    --to=fenghua.yu@intel.com \
    --cc=JBeulich@novell.com \
    --cc=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=r.marek@assembler.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®