Re: [RESEND/PATCH 6/6] USB: musb-gadget: fix dma length in txstate

[Felipe Balbi <balbi@ti.com>]

On Tue, Sep 14, 2010 at 12:43:25PM -0500, Sergei Shtylyov wrote:
>Hello.
>
>tom.leiming@gmail.com wrote:
>
>> From: Ming Lei <tom.leiming@gmail.com>
>
>> DMA length should not go beyond the availabe space of request buffer,
>> so fix it.
>
>> Signed-off-by: Ming Lei <tom.leiming@gmail.com>
>> Cc: David Brownell <dbrownell@users.sourceforge.net>
>> Cc: Felipe Balbi <me@felipebalbi.com>
>> Cc: Anand Gadiyar <gadiyar@ti.com>
>> Cc: Mike Frysinger <vapier@gentoo.org>
>> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
>
>[...]
>
>> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
>> index fa826f9..cacae96 100644
>> --- a/drivers/usb/musb/musb_gadget.c
>> +++ b/drivers/usb/musb/musb_gadget.c
>> @@ -300,6 +300,11 @@ static void txstate(struct musb *musb, struct musb_request *req)
>>  #ifndef	CONFIG_MUSB_PIO_ONLY
>>  	if (is_dma_capable() && musb_ep->dma) {
>>  		struct dma_controller	*c = musb->dma_controller;
>> +		size_t request_size;
>> +
>> +		/* setup DMA, then program endpoint CSR */
>> +		request_size = min_t(size_t, request->length - request->actual,
>> +					musb_ep->dma->max_len);
>
>    Er, you're moving this from under #ifdef CONFIG_USB_INVENTRA_DMA to the
>common code, right? Do you know that not all DMA drivers initialize max_len? For
>example CPPI driver doesn't, so it's left at zero. You're going to break DMA for
>CPPI. Please extend your patch, adding cppi_dma.c to it.

yes, please set some value on cppi_dma.c max_len field.

-- 
balbi