From: Jean Delvare <khali@linux-fr.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
LM Sensors <lm-sensors@lm-sensors.org>,
Guenter Roeck <guenter.roeck@ericsson.com>
Subject: [GIT PULL] hwmon updates for 2.6.37
Date: Thu, 28 Oct 2010 20:49:48 +0200 [thread overview]
Message-ID: <20101028204948.2a89ad83@endymion.delvare> (raw)
Hi Linus,
Please pull hwmon subsystem updates for Linux 2.6.37 from:
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging.git hwmon-for-linus
The main changes are a lot of fixes, improvements and new device
support in the lm90 driver, and the new w83795 driver for the
Winbond/Nuvoton W83795G/ADG devices (still work in progress, but
usable.)
Documentation/hwmon/it87 | 28 +-
Documentation/hwmon/lm85 | 60 +-
Documentation/hwmon/lm90 | 42 +-
Documentation/hwmon/pcf8591 | 18 +-
Documentation/hwmon/sysfs-interface | 15 +
MAINTAINERS | 8 +-
drivers/hwmon/Kconfig | 100 +-
drivers/hwmon/Makefile | 2 +-
drivers/hwmon/adt7475.c | 2 +-
drivers/hwmon/asc7621.c | 4 +-
drivers/hwmon/it87.c | 210 ++-
drivers/hwmon/k8temp.c | 51 +-
drivers/hwmon/lm75.c | 51 +-
drivers/hwmon/lm85.c | 36 +-
drivers/hwmon/lm90.c | 1014 +++++++++----
drivers/hwmon/pcf8591.c | 38 +-
drivers/hwmon/s3c-hwmon.c | 8 +-
drivers/hwmon/tmp421.c | 4 +-
drivers/hwmon/w83795.c | 2121 ++++++++++++++++++++++++++
drivers/macintosh/Kconfig | 26 +
drivers/macintosh/Makefile | 2 +
drivers/{hwmon => macintosh}/ams/Makefile | 0
drivers/{hwmon => macintosh}/ams/ams-core.c | 0
drivers/{hwmon => macintosh}/ams/ams-i2c.c | 0
drivers/{hwmon => macintosh}/ams/ams-input.c | 0
drivers/{hwmon => macintosh}/ams/ams-pmu.c | 0
drivers/{hwmon => macintosh}/ams/ams.h | 0
27 files changed, 3284 insertions(+), 556 deletions(-)
create mode 100644 drivers/hwmon/w83795.c
rename drivers/{hwmon => macintosh}/ams/Makefile (100%)
rename drivers/{hwmon => macintosh}/ams/ams-core.c (100%)
rename drivers/{hwmon => macintosh}/ams/ams-i2c.c (100%)
rename drivers/{hwmon => macintosh}/ams/ams-input.c (100%)
rename drivers/{hwmon => macintosh}/ams/ams-pmu.c (100%)
rename drivers/{hwmon => macintosh}/ams/ams.h (100%)
---------------
Andreas Herrmann (1):
hwmon: (k8temp) Remove superfluous CPU family check
Guenter Roeck (12):
hwmon: Add tempX_emergency attribute to sysfs ABI
hwmon: (lm90) Fix checkpatch errors
hwmon: (lm90) Introduce device feature bits
hwmon: (lm90) Introduce function to delete sysfs files
hwmon: (lm90) Simplify set_temp11 register calculations
hwmon: (lm90) Add explicit support for max6659
hwmon: (lm90) Add support for extra features of max6659
hwmon: (lm90) Add support for max6695 and max6696
hwmon: (lm90) Rearrange code to no longer require forward declarations
hwmon: (lm90) Introduce chip parameter structure
hwmon: (lm90) Introduce capability flag to indicate broken ALERT functionality
hwmon: (lm90) Add support for update_interval sysfs attribute
Jean Delvare (50):
hwmon: (lm90) Add support for the W83L771W/G
hwmon: (w83795) Misc cleanups
hwmon: (w83795) Drop duplicate enum
hwmon: (w83795) Refactor bank selection
hwmon: (w83795) Improve detection routine
hwmon: (w83795) Move files removal to a separate function
hwmon: (w83795) Move file creation to a separate function too
hwmon: (w83795) Merge w83795_create_files and w83795_remove_files
hwmon: (w83795) Use 2D arrays for many device attributes
hwmon: (w83795) Move PWM attributes to a dedidated array
hwmon: (w83795) Only create fan[1-8]_target files when needed
hwmon: (w83795) Add const markers
hwmon: (w83795) Only start monitoring if needed
hwmon: (w83795) Fix in17-in20 gain factor
hwmon: (w83795) Clean up probe function
hwmon: (w83795) Fix LSB reading of fan speeds
hwmon: (w83795) Add support for dynamic in0-2 limits
hwmon: (w83795) Fix PWM duty cycle frequency attributes
hwmon: (w83795) Rename temperature limit attributes
hwmon: (w83795) Properly handle negative temperatures
hwmon: (w83795) Report PECI agent Tbase values
hwmon: (w83795) Rework beep_enable implementation
hwmon: (w83795) Avoid reading the same register twice
hwmon: (w83795) Get rid of VRLSB_SHIFT
hwmon: (w83795) Fix parity checks
hwmon: (w83795) Drop REST_VLT_BEGIN/END
hwmon: (w83795) Drop _NUM constants
hwmon: (w83795) Simplify temperature sensor type handling
hwmon: (w83795) Don't pre-read values we'll update later
hwmon: (w83795) Make W83795_REG_PWM more efficient
hwmon: (w83795) Pack similar register reads
hwmon: (w83795) Move register reads to dedicated functions
hwmon: (w83795) Delay reading limit registers
hwmon: (w83795) Delay reading pwm config registers
hwmon: (w83795) Use dev_get_drvdata() where possible
hwmon: (w83795) Fix LSB reading of voltage limits
hwmon: (w83795) More style cleanups
hwmon: (w83795) Add myself as co-author and maintainer
hwmon: (w83795) Exclude fan control feature by default
hwmon: (w83795) Use standard attributes for chassis intrusion
hwmon: (pcf8591) Register as a hwmon device
hwmon: (pcf8591) Don't attempt to detect devices
Move ams driver to macintosh
hwmon: I2C addresses are constant
hwmon: (lm85) Fix ADT7468 frequency table
hwmon: (lm85) Document the ADT7468 as supported
hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode
hwmon: Remove many EXPERIMENTAL flags
hwmon: (it87) Move conversion functions
hwmon: (it87) Add support for the IT8721F/IT8758E
Maurus Cuelenaere (1):
hwmon: (s3c-hwmon) Depend on S3C_ADC
Shubhrajyoti D (2):
hwmon: (lm75) Make the writing to sysfs more robust
hwmon: (lm75) Trivial changes to pacify the checkpatch
Thomas Gleixner (1):
hwmon: (s3c-hwmon) Use a real mutex
Wei Song (1):
hwmon: New driver for the W83795G/ADG monitoring chips
Thanks,
--
Jean Delvare
reply other threads:[~2010-10-28 18:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101028204948.2a89ad83@endymion.delvare \
--to=khali@linux-fr.org \
--cc=guenter.roeck@ericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®