mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
	Bart Oldeman <bartoldeman@users.sourceforge.net>,
	Frederic Weisbecker <fweisbec@gmail.com>,
	"K.Prasad" <prasad@linux.vnet.ibm.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Alexander van Heukelum <heukelum@fastmail.fm>,
	"H. Peter Anvin" <hpa@linux.intel.com>
Subject: [24/66] x86, vm86: Fix preemption bug for int1 debug and int3 breakpoint handlers.
Date: Fri, 19 Nov 2010 14:00:55 -0800	[thread overview]
Message-ID: <20101119220124.144057056@clark.site> (raw)
In-Reply-To: <20101119220309.GA15562@kroah.com>

2.6.36-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Bart Oldeman <bartoldeman@gmail.com>

commit 6554287b1de0448f1e02e200d02b43914e997d15 upstream.

Impact: fix kernel bug such as:
BUG: scheduling while atomic: dosemu.bin/19680/0x00000004
See also Ubuntu bug 455067 at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/455067

Commits 4915a35e35a037254550a2ba9f367a812bc37d40
("Use preempt_conditional_sti/cli in do_int3, like on x86_64.")
and 3d2a71a596bd9c761c8487a2178e95f8a61da083
("x86, traps: converge do_debug handlers")
started disabling preemption in int1 and int3 handlers on i386.
The problem with vm86 is that the call to handle_vm86_trap() may jump
straight to entry_32.S and never returns so preempt is never enabled
again, and there is an imbalance in the preempt count.

Commit be716615fe596ee117292dc615e95f707fb67fd1 ("x86, vm86:
fix preemption bug"), which was later (accidentally?) reverted by commit
08d68323d1f0c34452e614263b212ca556dae47f ("hw-breakpoints: modifying
generic debug exception to use thread-specific debug registers")
fixed the problem for debug exceptions but not for breakpoints.

There are three solutions to this problem.

1. Reenable preemption before calling handle_vm86_trap(). This
was the approach that was later reverted.

2. Do not disable preemption for i386 in breakpoint and debug handlers.
This was the situation before October 2008. As far as I understand
preemption only needs to be disabled on x86_64 because a seperate stack is
used, but it's nice to have things work the same way on
i386 and x86_64.

3. Let handle_vm86_trap() return instead of jumping to assembly code.
By setting a flag in _TIF_WORK_MASK, either TIF_IRET or TIF_NOTIFY_RESUME,
the code in entry_32.S is instructed to return to 32 bit mode from
V86 mode. The logic in entry_32.S was already present to handle signals.
(I chose TIF_IRET because it's slightly more efficient in
do_notify_resume() in signal.c, but in fact TIF_IRET can probably be
replaced by TIF_NOTIFY_RESUME everywhere.)

I'm submitting approach 3, because I believe it is the most elegant
and prevents future confusion. Still, an obvious
preempt_conditional_cli(regs); is necessary in traps.c to correct the
bug.

[ hpa: This is technically a regression, but because:
  1. the regression is so old,
  2. the patch seems relatively high risk, justifying more testing, and
  3. we're late in the 2.6.36-rc cycle,

  I'm queuing it up for the 2.6.37 merge window.  It might, however,
  justify as a -stable backport at a latter time, hence Cc: stable. ]

Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net>
LKML-Reference: <alpine.DEB.2.00.1009231312330.4732@localhost.localdomain>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/x86/kernel/traps.c   |    1 +
 arch/x86/kernel/vm86_32.c |   10 ++++++++--
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -575,6 +575,7 @@ dotraplinkage void __kprobes do_debug(st
 	if (regs->flags & X86_VM_MASK) {
 		handle_vm86_trap((struct kernel_vm86_regs *) regs,
 				error_code, 1);
+		preempt_conditional_cli(regs);
 		return;
 	}
 
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -551,8 +551,14 @@ cannot_handle:
 int handle_vm86_trap(struct kernel_vm86_regs *regs, long error_code, int trapno)
 {
 	if (VMPI.is_vm86pus) {
-		if ((trapno == 3) || (trapno == 1))
-			return_to_32bit(regs, VM86_TRAP + (trapno << 8));
+		if ((trapno == 3) || (trapno == 1)) {
+			KVM86->regs32->ax = VM86_TRAP + (trapno << 8);
+			/* setting this flag forces the code in entry_32.S to
+			   call save_v86_state() and change the stack pointer
+			   to KVM86->regs32 */
+			set_thread_flag(TIF_IRET);
+			return 0;
+		}
 		do_int(regs, trapno, (unsigned char __user *) (regs->pt.ss << 4), SP(regs));
 		return 0;
 	}



  parent reply	other threads:[~2010-11-19 22:15 UTC|newest]

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-19 22:03 [00/66] 2.6.36.1-stable review Greg KH
2010-11-19 22:00 ` [01/66] staging: usbip: Notify usb core of port status changes Greg KH
2010-11-19 22:00 ` [02/66] staging: usbip: Process event flags without delay Greg KH
2010-11-19 22:00 ` [03/66] Staging: phison: fix problem caused by libata change Greg KH
2010-11-19 22:00 ` [04/66] perf_events: Fix bogus AMD64 generic TLB events Greg KH
2010-11-19 22:00 ` [05/66] perf_events: Fix bogus context time tracking Greg KH
2010-11-19 22:00 ` [06/66] powerpc/perf: Fix sampling enable for PPC970 Greg KH
2010-11-19 22:00 ` [07/66] pcmcia: synclink_cs: fix information leak to userland Greg KH
2010-11-19 22:00 ` [08/66] sched: Drop all load weight manipulation for RT tasks Greg KH
2010-11-19 22:00 ` [09/66] sched: Fix string comparison in /proc/sched_features Greg KH
2010-11-19 22:00 ` [10/66] bluetooth: Fix missing NULL check Greg KH
2010-11-19 22:00 ` [11/66] Bluetooth: fix oops in l2cap_connect_req Greg KH
2010-11-19 22:00 ` [12/66] futex: Fix errors in nested key ref-counting Greg KH
2010-11-19 22:00 ` [13/66] cifs: fix broken oplock handling Greg KH
2010-11-19 22:00 ` [14/66] libahci: fix result_tf handling after an ATA PIO data-in command Greg KH
2010-11-19 22:00 ` [15/66] intel_idle: do not use the LAPIC timer for ATOM C2 Greg KH
2010-11-19 22:00 ` [16/66] mm, x86: Saving vmcore with non-lazy freeing of vmas Greg KH
2010-11-19 22:00 ` [17/66] x86, cpu: Fix renamed, not-yet-shipping AMD CPUID feature bit Greg KH
2010-11-19 22:00 ` [18/66] x86, mrst: A function in a header file needs to be marked "inline" Greg KH
2010-11-19 22:00 ` [19/66] x86, kexec: Make sure to stop all CPUs before exiting the kernel Greg KH
2010-11-19 22:00 ` [20/66] x86, olpc: Dont retry EC commands forever Greg KH
2010-11-19 22:00 ` [21/66] x86, mtrr: Assume SYS_CFG[Tom2ForceMemTypeWB] exists on all future AMD CPUs Greg KH
2010-11-19 22:00 ` [22/66] x86, intr-remap: Set redirection hint in the IRTE Greg KH
2010-11-19 22:00 ` [23/66] x86, kdump: Change copy_oldmem_page() to use cached addressing Greg KH
2010-11-19 22:00 ` Greg KH [this message]
2010-11-19 22:00 ` [25/66] KVM: X86: Report SVM bit to userspace only when supported Greg KH
2010-11-19 22:00 ` [26/66] KVM: SVM: Restore correct registers after sel_cr0 intercept emulation Greg KH
2010-11-19 22:00 ` [27/66] USB: mct_u232: fix broken close Greg KH
2010-11-19 22:00 ` [28/66] pipe: fix failure to return error code on ->confirm() Greg KH
2010-11-19 22:01 ` [29/66] p54usb: fix off-by-one on !CONFIG_PM Greg KH
2010-11-19 22:01 ` [30/66] p54usb: add five more USBIDs Greg KH
2010-11-19 22:01 ` [31/66] drivers/net/wireless/p54/eeprom.c: Return -ENOMEM on memory allocation failure Greg KH
2010-11-19 22:01 ` [32/66] usb gadget: composite: prevent OOPS for non-standard control request Greg KH
2010-11-19 22:01 ` [33/66] USB: gadget: g_ffs: fixed vendor and product ID Greg KH
2010-11-19 22:01 ` [34/66] USB: gadget: g_multi: " Greg KH
2010-11-19 22:01 ` [35/66] USB: ftdi_sio: Add PID for accesio products Greg KH
2010-11-19 22:01 ` [36/66] USB: ftdi_sio: revert "USB: ftdi_sio: fix DTR/RTS line modes" Greg KH
2010-11-19 22:01 ` [37/66] USB: add PID for FTDI based OpenDCC hardware Greg KH
2010-11-19 22:01 ` [38/66] USB: ftdi_sio: new VID/PIDs for various Papouch devices Greg KH
2010-11-19 22:01 ` [39/66] USB: ftdi_sio: add device ids for ScienceScope Greg KH
2010-11-19 22:01 ` [40/66] USB: MUSB: fix kernel WARNING/oops when unloading module in OTG mode Greg KH
2010-11-19 22:01 ` [41/66] usb: musb: blackfin: call usb_nop_xceiv_unregister() in musb_platform_exit() Greg KH
2010-11-19 22:01 ` [42/66] usb: musb: blackfin: call gpio_free() on error path in musb_platform_init() Greg KH
2010-11-19 22:01 ` [43/66] USB: Change acm_iad_descriptor bFunctionProtocol to USB_CDC_ACM_PROTO_AT_V25TER Greg KH
2010-11-19 22:01 ` [44/66] USB: option: Add more ZTE modem USB ids Greg KH
2010-11-19 22:01 ` [45/66] USB: cp210x: Add Renesas RX-Stick device ID Greg KH
2010-11-19 22:01 ` [46/66] USB: cp210x: Add WAGO 750-923 Service Cable " Greg KH
2010-11-19 22:01 ` [47/66] USB: atmel_usba_udc: force vbus_pin at -EINVAL when gpio_request failled Greg KH
2010-11-19 22:01 ` [48/66] USB: disable endpoints after unbinding interfaces, not before Greg KH
2010-11-19 22:01 ` [49/66] USB: visor: fix initialisation of UX50/TH55 devices Greg KH
2010-11-19 22:01 ` [50/66] USB: opticon: Fix long-standing bugs in opticon driver Greg KH
2010-11-19 22:01 ` [51/66] usb: r8a66597-hcd: Change mistake of the outsw function Greg KH
2010-11-19 22:01 ` [52/66] USB: accept some invalid ep0-maxpacket values Greg KH
2010-11-19 22:01 ` [53/66] OHCI: work around for nVidia shutdown problem Greg KH
2010-11-19 22:01 ` [54/66] asus-laptop: fix gps rfkill Greg KH
2010-11-19 22:01 ` [55/66] [SCSI] sd name space exhaustion causes system hang Greg KH
2010-11-19 22:01 ` [56/66] [SCSI] libsas: fix NCQ mixing with non-NCQ Greg KH
2010-11-19 22:01 ` [57/66] [SCSI] qla4xxx: fix build on PPC Greg KH
2010-11-19 22:01 ` [58/66] [SCSI] pmcraid: remove duplicate struct member Greg KH
2010-11-19 22:01 ` [59/66] [SCSI] gdth: integer overflow in ioctl Greg KH
2010-11-19 22:01 ` [60/66] [SCSI] Fix race when removing SCSI devices Greg KH
2010-11-19 22:01 ` [61/66] [SCSI] Fix regressions in scsi_internal_device_block Greg KH
2010-11-19 22:01 ` [62/66] Fixed Regression in NFS Direct I/O path Greg KH
2010-11-19 22:01 ` [63/66] secmark: do not return early if there was no error Greg KH
2010-11-19 22:01 ` [64/66] kgdb,arm: fix register dump Greg KH
2010-11-19 22:01 ` [65/66] ARM: cns3xxx: Fixup the missing second parameter to addruart macro to allow them to build Greg KH
2010-11-19 22:01 ` [66/66] sgi-xp: incoming XPC channel messages can come in after the channels partition structures have been torn down Greg KH
2010-11-19 22:18 ` [Stable-review] [00/66] 2.6.36.1-stable review Nikola Ciprich
2010-11-20  0:08   ` Greg KH
2010-11-22  8:33     ` Nikola Ciprich
2010-11-20 14:24 ` Andy Lutomirski
2010-11-20 15:52   ` Greg KH
2010-11-20 15:56 ` Thomas Meyer
2010-11-20 15:50   ` Greg KH
2010-12-07 20:18     ` [stable] " Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101119220124.144057056@clark.site \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=bartoldeman@users.sourceforge.net \
    --cc=fweisbec@gmail.com \
    --cc=heukelum@fastmail.fm \
    --cc=hpa@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=prasad@linux.vnet.ibm.com \
    --cc=stable-review@kernel.org \
    --cc=stable@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome