mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Christoph Lameter <cl@linux.com>
To: Tejun Heo <tj@kernel.org>
Cc: akpm@linux-foundation.org, Neil Horman <nhorman@tuxdriver.com>,
	Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: linux-kernel@vger.kernel.org
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Subject: [Use cpuops V1 06/11] drivers: Replace __get_cpu_var with __this_cpu_read if not used for an address.
Date: Mon, 06 Dec 2010 11:16:24 -0600	[thread overview]
Message-ID: <20101206171639.749599301@linux.com> (raw)
In-Reply-To: <20101206171618.302060721@linux.com>

[-- Attachment #1: cpuops_drivers --]
[-- Type: text/plain, Size: 3819 bytes --]

__get_cpu_var() can be replaced with this_cpu_read and will then use a single
read instruction with implied address calculation to access the correct per cpu
instance.

However, the address of a per cpu variable passed to __this_cpu_read() cannot be
determed (since its an implied address conversion through segment prefixes).
Therefore apply this only to uses of __get_cpu_var where the addres of the
variable is not used.

V3->V4:
	- Move one instance of this_cpu_inc_return to a later patch
	  so that this one can go in without percpu infrastructrure
	  changes.

Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christoph Lameter <cl@linux.com>

---
 drivers/acpi/processor_idle.c     |    6 +++---
 drivers/cpuidle/cpuidle.c         |    2 +-
 drivers/s390/cio/cio.c            |    2 +-
 drivers/staging/speakup/fakekey.c |    4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

Index: linux-2.6/drivers/acpi/processor_idle.c
===================================================================
--- linux-2.6.orig/drivers/acpi/processor_idle.c	2010-12-03 14:48:28.000000000 -0600
+++ linux-2.6/drivers/acpi/processor_idle.c	2010-12-06 10:26:16.000000000 -0600
@@ -746,7 +746,7 @@ static int acpi_idle_enter_c1(struct cpu
 	struct acpi_processor *pr;
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
 
-	pr = __get_cpu_var(processors);
+	pr = __this_cpu_read(processors);
 
 	if (unlikely(!pr))
 		return 0;
@@ -787,7 +787,7 @@ static int acpi_idle_enter_simple(struct
 	s64 idle_time_ns;
 	s64 idle_time;
 
-	pr = __get_cpu_var(processors);
+	pr = __this_cpu_read(processors);
 
 	if (unlikely(!pr))
 		return 0;
@@ -864,7 +864,7 @@ static int acpi_idle_enter_bm(struct cpu
 	s64 idle_time;
 
 
-	pr = __get_cpu_var(processors);
+	pr = __this_cpu_read(processors);
 
 	if (unlikely(!pr))
 		return 0;
Index: linux-2.6/drivers/cpuidle/cpuidle.c
===================================================================
--- linux-2.6.orig/drivers/cpuidle/cpuidle.c	2010-12-03 14:48:28.000000000 -0600
+++ linux-2.6/drivers/cpuidle/cpuidle.c	2010-12-06 10:26:16.000000000 -0600
@@ -49,7 +49,7 @@ static int __cpuidle_register_device(str
  */
 static void cpuidle_idle_call(void)
 {
-	struct cpuidle_device *dev = __get_cpu_var(cpuidle_devices);
+	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
 	struct cpuidle_state *target_state;
 	int next_state;
 
Index: linux-2.6/drivers/s390/cio/cio.c
===================================================================
--- linux-2.6.orig/drivers/s390/cio/cio.c	2010-12-03 14:48:28.000000000 -0600
+++ linux-2.6/drivers/s390/cio/cio.c	2010-12-06 10:26:16.000000000 -0600
@@ -619,7 +619,7 @@ void __irq_entry do_IRQ(struct pt_regs *
 	s390_idle_check(regs, S390_lowcore.int_clock,
 			S390_lowcore.async_enter_timer);
 	irq_enter();
-	__get_cpu_var(s390_idle).nohz_delay = 1;
+	__this_cpu_write(s390_idle.nohz_delay, 1);
 	if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
 		/* Serve timer interrupts first. */
 		clock_comparator_work();
Index: linux-2.6/drivers/staging/speakup/fakekey.c
===================================================================
--- linux-2.6.orig/drivers/staging/speakup/fakekey.c	2010-12-03 14:48:28.000000000 -0600
+++ linux-2.6/drivers/staging/speakup/fakekey.c	2010-12-06 10:26:16.000000000 -0600
@@ -78,10 +78,10 @@ void speakup_fake_down_arrow(void)
 	/* don't change CPU */
 	preempt_disable();
 
-	__get_cpu_var(reporting_keystroke) = true;
+	__this_cpu_write(reporting_keystroke), true);
 	input_report_key(virt_keyboard, KEY_DOWN, PRESSED);
 	input_report_key(virt_keyboard, KEY_DOWN, RELEASED);
-	__get_cpu_var(reporting_keystroke) = false;
+	__this_cpu_write(reporting_keystroke, false);
 
 	/* reenable preemption */
 	preempt_enable();


  parent reply	other threads:[~2010-12-06 17:16 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-06 17:16 [Use cpuops V1 00/11] Use this_cpu_ops Christoph Lameter
2010-12-06 17:16 ` [Use cpuops V1 01/11] percpucounter: Optimize __percpu_counter_add a bit through the use of this_cpu() options Christoph Lameter
2010-12-07 13:59   ` Tejun Heo
2010-12-06 17:16 ` [Use cpuops V1 02/11] vmstat: Optimize zone counter modifications through the use of this cpu operations Christoph Lameter
2010-12-07 14:00   ` Tejun Heo
2010-12-06 17:16 ` [Use cpuops V1 03/11] x86: Use this_cpu_ops to optimize code Christoph Lameter
2010-12-06 17:16 ` [Use cpuops V1 04/11] x86: Use this_cpu_ops for current_cpu_data accesses Christoph Lameter
2010-12-07 14:17   ` Tejun Heo
2010-12-07 14:20     ` Tejun Heo
2010-12-07 14:46       ` Christoph Lameter
2010-12-07 14:59         ` Tejun Heo
2010-12-07 15:07           ` Christoph Lameter
2010-12-07 15:08             ` Tejun Heo
2010-12-07 16:21               ` Christoph Lameter
2010-12-08 13:16                 ` [PATCH] x86: Replace uses of current_cpu_data with this_cpu ops Tejun Heo
2010-12-08 13:38                   ` Eric Dumazet
2010-12-08 15:33                     ` Christoph Lameter
2010-12-08 17:17                       ` Eric Dumazet
2010-12-08 17:20                         ` Tejun Heo
2010-12-08 17:33                           ` Christoph Lameter
2010-12-08 17:57                             ` Tejun Heo
2010-12-06 17:16 ` [Use cpuops V1 05/11] core: Replace __get_cpu_var with __this_cpu_read if not used for an address Christoph Lameter
2010-12-07 14:29   ` Tejun Heo
2010-12-07 14:51     ` Christoph Lameter
2010-12-07 15:21       ` Tejun Heo
2010-12-07 15:38         ` Christoph Lameter
2010-12-08 15:24           ` Tejun Heo
2010-12-06 17:16 ` Christoph Lameter [this message]
2010-12-07 14:31   ` [Use cpuops V1 06/11] drivers: " Tejun Heo
2010-12-06 17:16 ` [Use cpuops V1 07/11] kprobes: Use this_cpu_ops Christoph Lameter
2010-12-07 15:03   ` Tejun Heo
2010-12-06 17:16 ` [Use cpuops V1 08/11] Fakekey: Simplify speakup_fake_key_pressed through this_cpu_ops Christoph Lameter
2010-12-07 15:07   ` Tejun Heo
2010-12-06 17:16 ` [Use cpuops V1 09/11] Connector: Use this_cpu operations Christoph Lameter
2010-12-07 15:08   ` Tejun Heo
2010-12-07 15:36     ` Christoph Lameter
2010-12-06 17:16 ` [Use cpuops V1 10/11] fs: Use this_cpu_xx operations in buffer.c Christoph Lameter
2010-12-07 15:16   ` Tejun Heo
2010-12-06 17:16 ` [Use cpuops V1 11/11] Xen: Use this_cpu_ops Christoph Lameter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101206171639.749599301@linux.com \
    --to=cl@linux.com \
    --cc=akpm@linux-foundation.org \
    --cc=nhorman@tuxdriver.com \
    --cc=schwidefsky@de.ibm.com \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome