From: Lennert Buytenhek <buytenh@wantstofly.org>
To: Rabin Vincent <rabin.vincent@stericsson.com>,
Luotao Fu <l.fu@pengutronix.de>,
Linus Walleij <linus.walleij@stericsson.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 11/20] mfd: stmpe: irq_data conversion.
Date: Mon, 13 Dec 2010 13:31:02 +0100 [thread overview]
Message-ID: <20101213123102.GU15575@mail.wantstofly.org> (raw)
In-Reply-To: <cover.1292241952.git.buytenh@wantstofly.org>
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
---
drivers/mfd/stmpe.c | 28 ++++++++++++++--------------
1 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index b11487f..f319818 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -699,16 +699,16 @@ static irqreturn_t stmpe_irq(int irq, void *data)
return IRQ_HANDLED;
}
-static void stmpe_irq_lock(unsigned int irq)
+static void stmpe_irq_lock(struct irq_data *d)
{
- struct stmpe *stmpe = get_irq_chip_data(irq);
+ struct stmpe *stmpe = irq_data_get_irq_chip_data(d);
mutex_lock(&stmpe->irq_lock);
}
-static void stmpe_irq_sync_unlock(unsigned int irq)
+static void stmpe_irq_sync_unlock(struct irq_data *d)
{
- struct stmpe *stmpe = get_irq_chip_data(irq);
+ struct stmpe *stmpe = irq_data_get_irq_chip_data(d);
struct stmpe_variant_info *variant = stmpe->variant;
int num = DIV_ROUND_UP(variant->num_irqs, 8);
int i;
@@ -727,20 +727,20 @@ static void stmpe_irq_sync_unlock(unsigned int irq)
mutex_unlock(&stmpe->irq_lock);
}
-static void stmpe_irq_mask(unsigned int irq)
+static void stmpe_irq_mask(struct irq_data *d)
{
- struct stmpe *stmpe = get_irq_chip_data(irq);
- int offset = irq - stmpe->irq_base;
+ struct stmpe *stmpe = irq_data_get_irq_chip_data(d);
+ int offset = d->irq - stmpe->irq_base;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
stmpe->ier[regoffset] &= ~mask;
}
-static void stmpe_irq_unmask(unsigned int irq)
+static void stmpe_irq_unmask(struct irq_data *d)
{
- struct stmpe *stmpe = get_irq_chip_data(irq);
- int offset = irq - stmpe->irq_base;
+ struct stmpe *stmpe = irq_data_get_irq_chip_data(d);
+ int offset = d->irq - stmpe->irq_base;
int regoffset = offset / 8;
int mask = 1 << (offset % 8);
@@ -749,10 +749,10 @@ static void stmpe_irq_unmask(unsigned int irq)
static struct irq_chip stmpe_irq_chip = {
.name = "stmpe",
- .bus_lock = stmpe_irq_lock,
- .bus_sync_unlock = stmpe_irq_sync_unlock,
- .mask = stmpe_irq_mask,
- .unmask = stmpe_irq_unmask,
+ .irq_bus_lock = stmpe_irq_lock,
+ .irq_bus_sync_unlock = stmpe_irq_sync_unlock,
+ .irq_mask = stmpe_irq_mask,
+ .irq_unmask = stmpe_irq_unmask,
};
static int __devinit stmpe_irq_init(struct stmpe *stmpe)
--
1.7.1
next prev parent reply other threads:[~2010-12-13 12:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1292241952.git.buytenh@wantstofly.org>
2010-12-13 12:29 ` [PATCH 01/20] mfd: 88pm860x-core: " Lennert Buytenhek
2010-12-13 12:29 ` [PATCH 02/20] mfd: ab3550: " Lennert Buytenhek
2010-12-13 12:29 ` [PATCH 03/20] mfd: ab8500: " Lennert Buytenhek
2010-12-13 12:30 ` [PATCH 04/20] mfd: asic3: " Lennert Buytenhek
2010-12-13 12:30 ` [PATCH 05/20] mfd: ezx-pcap: " Lennert Buytenhek
2010-12-13 12:30 ` [PATCH 06/20] mfd: htc-egpio: " Lennert Buytenhek
2010-12-13 12:30 ` [PATCH 07/20] mfd: htc-i2cpld: " Lennert Buytenhek
2010-12-13 12:30 ` [PATCH 08/20] mfd: jz4740-adc: " Lennert Buytenhek
2010-12-13 20:45 ` Lars-Peter Clausen
2010-12-13 12:30 ` [PATCH 09/20] mfd: max8925: " Lennert Buytenhek
2010-12-13 12:30 ` [PATCH 10/20] mfd: max8998: " Lennert Buytenhek
2010-12-14 0:24 ` Kyungmin Park
2010-12-13 12:31 ` Lennert Buytenhek [this message]
2010-12-14 4:58 ` [PATCH 11/20] mfd: stmpe: " Rabin Vincent
2010-12-13 12:31 ` [PATCH 12/20] mfd: t7l66xb: " Lennert Buytenhek
2010-12-13 12:31 ` [PATCH 13/20] mfd: tc35892: " Lennert Buytenhek
2010-12-13 12:31 ` [PATCH 14/20] mfd: tc6393xb: " Lennert Buytenhek
2010-12-13 12:31 ` [PATCH 15/20] mfd: tps6586x: " Lennert Buytenhek
2010-12-13 12:58 ` Mike Rapoport
2010-12-13 12:31 ` [PATCH 16/20] mfd: twl4030: " Lennert Buytenhek
2010-12-13 12:31 ` [PATCH 17/20] mfd: twl6030: " Lennert Buytenhek
2010-12-13 12:53 ` Santosh Shilimkar
2010-12-20 1:04 ` Samuel Ortiz
2010-12-13 12:31 ` [PATCH 18/20] mfd: wm831x: " Lennert Buytenhek
2010-12-13 12:39 ` Mark Brown
2010-12-14 9:15 ` Lennert Buytenhek
2010-12-20 0:33 ` Samuel Ortiz
2010-12-13 12:31 ` [PATCH 19/20] mfd: wm8350: " Lennert Buytenhek
2010-12-13 12:31 ` [PATCH 20/20] mfd: wm8994: " Lennert Buytenhek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101213123102.GU15575@mail.wantstofly.org \
--to=buytenh@wantstofly.org \
--cc=l.fu@pengutronix.de \
--cc=linus.walleij@stericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rabin.vincent@stericsson.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®