Hi,

On Wed, Dec 15, 2010 at 07:10:28PM -0800, ext Linus Torvalds wrote:
> 
> Go forth and test. And please do remember to ping bugzilla (or
> developers) about any regressions you find, whether new or old.

I have some problem with i945, display remains blank. I also tried
adding i915.modeset=0 but nothing changed. Machine is well alive and
responds to basic commands like Ctrl+Alt+F1 and Ctrl+Alt+Del but I have
not other machine to enter via network.

Since it was working in -rc5, I bisected it. It boiled down to
ea5d552c73707645c53d42e8a71c9a4d9cbb85c1 but it's not the right commit
since everything still works with it. And I'm officially confused.

Unfortunately I cannot play too much with this box so please give me
some clever suggestion to be more efficient. Anyway I'll try also at
home on a i915 :)

I attached configuration and boot log.

thanks,
Domenico


> Alex Deucher (4):
>       drm/radeon/kms: fix formatting of vram and gtt info
>       drm/radeon/kms: fix vram base calculation on rs780/rs880
>       drm/kms: remove spaces from connector names (v2)
>       drm/radeon/kms: don't apply 7xx HDP flush workaround on AGP
> 
> Chris Wilson (10):
>       drm/i915: Clean conflicting modesetting registers upon init
>       drm/i915: Death to the unnecessary 64bit divide
>       drm/i915: Factor in pixel-repeat in FDI M/N calculation
>       drm/i915/ringbuffer: Only print an error on the second attempt to reset head
>       drm/i915/lvds: Always restore panel-fitter when enabling the LVDS
>       drm/i915: Emit a request to clear a flushed and idle ring for unbusy bo
>       drm/i915/dp: Only apply the workaround if the select is still active
>       drm: Add missing drm_vblank_put() along queue vblank error path
>       drm: Don't try and disable an encoder that was never enabled
>       ACPI: video: fix build for CONFIG_ACPI=n
> 
> Daniel Vetter (1):
>       drm/i915: announce to userspace that the bsd ring is coherent
> 
> Dave Airlie (1):
>       drm/i915: i915 cannot provide switcher services.
> 
> Eric Anholt (2):
>       drm/i915: Always set the DP transcoder config to 8BPC.
>       drm/i915: Apply a workaround for transitioning from DP on pipe B to HDMI.