From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
To: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>,
Pekka Enberg <penberg@cs.helsinki.fi>,
akpm@linux-foundation.org, linux-kernel@vger.kernel.org,
Eric Dumazet <eric.dumazet@gmail.com>
Subject: Re: [cpuops cmpxchg double V2 1/4] Generic support for this_cpu_cmpxchg_double
Date: Fri, 21 Jan 2011 12:50:54 -0500 [thread overview]
Message-ID: <20110121175054.GB12150@Krystal> (raw)
In-Reply-To: <alpine.DEB.2.00.1101211101510.15418@router.home>
* Christoph Lameter (cl@linux.com) wrote:
> On Fri, 21 Jan 2011, Mathieu Desnoyers wrote:
>
> > I'm again probably missing something, but what is "clumsy" about defining a
> > structure like the following to ensure proper alignment of the target
> > pointer (instead of adding a runtime test) ?
> >
> > struct cmpxchg_double {
> > #if __BYTE_ORDER == __LITTLE_ENDIAN
> > unsigned long low, high;
> > #else
> > unsigned long high, low;
> > #endif
> > } __attribute__((packed, aligned(2 * sizeof(unsigned long))));
> >
> > (note: packed here along with "aligned" does _not_ generate ugly bytewise
> > read/write memory ops like "packed" alone. The use of "packed" is to let the
> > compiler down-align the structure to the value requested, instead of uselessly
> > aligning it on 32-byte if it chooses to.)
> >
> > The prototype could then look like:
> >
> > bool __this_cpu_generic_cmpxchg_double(pcp, oval_low, oval_high, nval_low, nval_high);
> >
> > With:
> > struct cmpxchg_double *pcp
>
> That does not conform to the parameter conventions in other this_cpu_ops.
> The first parameter is a variable because the notion of a pointer is
> problematic given that percpu operations use a segment prefix to relocate
> pointers.
So the first argument could be along the lines of:
struct cmpxchg_double pcp
then.
> You would be implicitly passing a 128 bit argument although the
> compiler may not need to generate code for that.
Sorry, I don't understand this last statement. Does it still apply if we pass
pcp as I just proposed ? (without the pointer, with a __builtin_choose_expr
check on __alignof__ of the pcp parameter)
>
> > I think Christoph's point is that he wants to alias this with a pointer. Well,
> > this can be done cleanly with:
> >
> > union {
> > struct cmpxchg_double casdbl;
> > struct {
> > void *ptr;
> > unsigned long cpuid_tid;
> > } t;
> > }
>
> There is no need for aliases with the existing implementation.
>
> How will the macro check the parameters now?
Well, my last proposal to check __alignof__ within a __builtin_choose_expr
check wouldn't need this union actually, which would be much better I think.
>
> > Thoughts ?
>
> Could you actually try to write a patch instead running through points
> that we have discussed earlier?
I'm going back to the points that have been previously dismissed with a rather
large degree of handwaving. ;) I'm OK with looking into the API and providing
code snippets to show the basic implementation behind the ideas, but I
unfortunately don't have the bandwidth to stop everything I'm currently working
on and start working on double-cas patches. Sorry, I wish I could do more.
Thanks,
Mathieu
--
Mathieu Desnoyers
Operating System Efficiency R&D Consultant
EfficiOS Inc.
http://www.efficios.com
next prev parent reply other threads:[~2011-01-21 17:50 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 20:45 [cpuops cmpxchg double V2 0/4] this_cpu_cmpxchg_double support Christoph Lameter
2011-01-06 20:45 ` [cpuops cmpxchg double V2 1/4] Generic support for this_cpu_cmpxchg_double Christoph Lameter
2011-01-06 21:08 ` Mathieu Desnoyers
2011-01-06 21:43 ` Christoph Lameter
2011-01-06 22:05 ` H. Peter Anvin
2011-01-07 15:15 ` Christoph Lameter
2011-01-07 18:04 ` Mathieu Desnoyers
2011-01-07 18:41 ` Christoph Lameter
2011-01-08 17:24 ` Tejun Heo
2011-01-09 8:33 ` Pekka Enberg
2011-01-21 7:31 ` Pekka Enberg
2011-01-21 9:26 ` Tejun Heo
2011-01-21 15:31 ` H. Peter Anvin
2011-01-21 15:48 ` Tejun Heo
2011-01-21 16:30 ` H. Peter Anvin
2011-01-21 16:34 ` Tejun Heo
2011-01-21 16:54 ` Mathieu Desnoyers
2011-01-21 17:07 ` Christoph Lameter
2011-01-21 17:50 ` Mathieu Desnoyers [this message]
2011-01-21 18:06 ` Christoph Lameter
2011-01-21 18:37 ` Mathieu Desnoyers
2011-01-21 17:08 ` Tejun Heo
2011-01-21 17:13 ` H. Peter Anvin
2011-01-21 17:19 ` Tejun Heo
2011-01-24 6:01 ` H. Peter Anvin
2011-02-25 13:09 ` Pekka Enberg
2011-02-25 13:19 ` Tejun Heo
2011-02-25 16:26 ` Christoph Lameter
2011-02-25 16:37 ` Tejun Heo
2011-02-25 16:43 ` Christoph Lameter
2011-02-25 16:38 ` Eric Dumazet
2011-02-25 16:45 ` Christoph Lameter
2011-01-21 17:24 ` Christoph Lameter
2011-01-21 17:42 ` Mathieu Desnoyers
2011-01-21 17:50 ` Christoph Lameter
2011-01-21 18:10 ` Mathieu Desnoyers
2011-01-21 18:42 ` Christoph Lameter
2011-01-21 18:31 ` H. Peter Anvin
2011-01-21 18:46 ` Christoph Lameter
2011-01-21 19:32 ` Mathieu Desnoyers
2011-01-23 18:00 ` H. Peter Anvin
2011-01-06 20:45 ` [cpuops cmpxchg double V2 2/4] x86: this_cpu_cmpxchg_double() support Christoph Lameter
2011-01-06 20:45 ` [cpuops cmpxchg double V2 3/4] slub: Get rid of slab_free_hook_irq() Christoph Lameter
2011-01-06 20:45 ` [cpuops cmpxchg double V2 4/4] Lockless (and preemptless) fastpaths for slub Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110121175054.GB12150@Krystal \
--to=mathieu.desnoyers@efficios.com \
--cc=akpm@linux-foundation.org \
--cc=cl@linux.com \
--cc=eric.dumazet@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=penberg@cs.helsinki.fi \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®