From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Subject: [patch 2/3] xtensa: Convert s6000 gpio irq_chip to new functions
Date: Sun, 06 Feb 2011 21:12:22 -0000 [thread overview]
Message-ID: <20110206211137.750284615@linutronix.de> (raw)
In-Reply-To: <20110206211051.865188529@linutronix.de>
[-- Attachment #1: xtensa-convert-s6000-gpio.patch --]
[-- Type: text/plain, Size: 2580 bytes --]
Also use proper wrappers for irq_desc access.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/xtensa/variants/s6000/gpio.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
Index: linux-next/arch/xtensa/variants/s6000/gpio.c
===================================================================
--- linux-next.orig/arch/xtensa/variants/s6000/gpio.c
+++ linux-next/arch/xtensa/variants/s6000/gpio.c
@@ -85,30 +85,29 @@ int s6_gpio_init(u32 afsel)
return gpiochip_add(&gpiochip);
}
-static void ack(unsigned int irq)
+static void ack(struct irq_data *d)
{
- writeb(1 << (irq - IRQ_BASE), S6_REG_GPIO + S6_GPIO_IC);
+ writeb(1 << (d->irq - IRQ_BASE), S6_REG_GPIO + S6_GPIO_IC);
}
-static void mask(unsigned int irq)
+static void mask(struct irq_data *d)
{
u8 r = readb(S6_REG_GPIO + S6_GPIO_IE);
- r &= ~(1 << (irq - IRQ_BASE));
+ r &= ~(1 << (d->irq - IRQ_BASE));
writeb(r, S6_REG_GPIO + S6_GPIO_IE);
}
-static void unmask(unsigned int irq)
+static void unmask(struct irq_data *d)
{
u8 m = readb(S6_REG_GPIO + S6_GPIO_IE);
- m |= 1 << (irq - IRQ_BASE);
+ m |= 1 << (d->irq - IRQ_BASE);
writeb(m, S6_REG_GPIO + S6_GPIO_IE);
}
-static int set_type(unsigned int irq, unsigned int type)
+static int set_type(struct irq_data *d, unsigned int type)
{
- const u8 m = 1 << (irq - IRQ_BASE);
+ const u8 m = 1 << (d->irq - IRQ_BASE);
irq_flow_handler_t handler;
- struct irq_desc *desc;
u8 reg;
if (type == IRQ_TYPE_PROBE) {
@@ -129,8 +128,7 @@ static int set_type(unsigned int irq, un
handler = handle_edge_irq;
}
writeb(reg, S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IS);
- desc = irq_to_desc(irq);
- desc->handle_irq = handler;
+ __set_irq_handler_unlocked(irq, handler);
reg = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_IEV);
if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING))
@@ -160,12 +158,13 @@ static u8 demux_masks[4];
static void demux_irqs(unsigned int irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = get_irq_desc_chip(desc);
u8 *mask = get_irq_desc_data(desc);
u8 pending;
int cirq;
- desc->chip->mask(irq);
- desc->chip->ack(irq);
+ chip->mask(&desc->irq_data);
+ chip->ack(&desc->irq_data));
pending = readb(S6_REG_GPIO + S6_GPIO_BANK(0) + S6_GPIO_MIS) & *mask;
cirq = IRQ_BASE - 1;
while (pending) {
@@ -174,7 +173,7 @@ static void demux_irqs(unsigned int irq,
pending >>= n;
generic_handle_irq(cirq);
}
- desc->chip->unmask(irq);
+ chip->unmask(&desc->irq_data));
}
extern const signed char *platform_irq_mappings[XTENSA_NR_IRQS];
next prev parent reply other threads:[~2011-02-06 21:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-06 21:12 [patch 0/3] xtensa: Convert to new irq_chip functions Thomas Gleixner
2011-02-06 21:12 ` [patch 1/3] xtensa: Convert main irq_chip to new functions Thomas Gleixner
2011-02-06 21:12 ` Thomas Gleixner [this message]
2011-02-06 21:12 ` [patch 3/3] xtensa: Use generic IRQ Kconfig and set GENERIC_HARDIRQS_NO_DEPRECATED Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110206211137.750284615@linutronix.de \
--to=tglx@linutronix.de \
--cc=chris@zankel.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®