On Fri, Feb 11, 2011 at 12:04:37AM +0300, Antony Pavlov wrote:
> The AM29LV040B chips use 0x50 as sector erase command instead of 0x30 [1].
> 
> [1] http://www.datasheetcatalog.com/datasheets_pdf/A/M/2/9/AM29LV040B.shtml

I am confused. The datasheet says on page 15 it uses 0x30 while your
description above says it uses 0x50...

> Signed-off-by: Antony Pavlov <antony@niisi.msk.ru>
> ---
>  drivers/mtd/chips/cfi_cmdset_0002.c |    9 +++++++++
>  1 files changed, 9 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
> index f072fcf..a401dbe 100644
> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
> @@ -332,6 +332,14 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd)
>  	}
>  }
>  
> +static void fixup_use_sector_erase_cmd_30(struct mtd_info *mtd)
> +{
> +	struct map_info *map = mtd->priv;
> +	struct cfi_private *cfi = map->fldrv_priv;
> +
> +	cfi->sector_erase_cmd = CMD(0x30);

... but here you change it to 0x30 (which is the default) instead of 0x50?

Please clarify,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |