From: Arnd Bergmann <arnd@arndb.de>
To: "Guan Xuetao" <gxt@mprc.pku.edu.cn>
Cc: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
"'Greg KH'" <greg@kroah.com>
Subject: Re: [PATCH 06/12] unicore32 additional architecture files: low-level lib: misc
Date: Thu, 17 Feb 2011 18:14:28 +0100 [thread overview]
Message-ID: <201102171814.29081.arnd@arndb.de> (raw)
In-Reply-To: <014d01cbcdae$091bc6d0$1b535470$@mprc.pku.edu.cn>
On Wednesday 16 February 2011, Guan Xuetao wrote:
> diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h
> new file mode 100644
> index 0000000..d73457c
> --- /dev/null
> +++ b/arch/unicore32/include/asm/io.h
> @@ -0,0 +1,52 @@
> +/*
> + * linux/arch/unicore32/include/asm/io.h
> + *
> + * Code specific to PKUnity SoC and UniCore ISA
> + *
> + * Copyright (C) 2001-2010 GUAN Xue-tao
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef __UNICORE_IO_H__
> +#define __UNICORE_IO_H__
> +
> +#ifdef __KERNEL__
> +
> +#include <asm/byteorder.h>
> +#include <asm/memory.h>
> +#include <asm/system.h>
> +
> +#include <asm-generic/io.h>
> +
I just realized that the generic io.h implementation is actually wrong here, because it does
not offset the PIO port numbers with the PCI I/O range. To get this right, you need
the patch below, and also need to define PCI_IOBASE appropriately.
Arnd
8<-------
asm-generic: fix inX/outX functions for architectures that have PCI
The definitions for the PC-style PIO functions in asm-generic/io.h were
meant as dummies so you could compile code on architectures without
ISA and PCI buses. However, unicore32 actually wants to use them
with a real PCI bus, so they need to be defined to actually address
the register window holding the I/O ports.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index 4644c9a..e0ffa3d 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -94,6 +94,10 @@ static inline void __raw_writeq(u64 b, volatile void __iomem *addr)
#define writeq(b,addr) __raw_writeq(__cpu_to_le64(b),addr)
#endif
+#ifndef PCI_IOBASE
+#define PCI_IOBASE ((void __iomem *) 0)
+#endif
+
/*****************************************************************************/
/*
* traditional input/output functions
@@ -101,32 +105,32 @@ static inline void __raw_writeq(u64 b, volatile void __iomem *addr)
static inline u8 inb(unsigned long addr)
{
- return readb((volatile void __iomem *) addr);
+ return readb(addr + PCI_IOBASE);
}
static inline u16 inw(unsigned long addr)
{
- return readw((volatile void __iomem *) addr);
+ return readw(addr + PCI_IOBASE);
}
static inline u32 inl(unsigned long addr)
{
- return readl((volatile void __iomem *) addr);
+ return readl(addr + PCI_IOBASE);
}
static inline void outb(u8 b, unsigned long addr)
{
- writeb(b, (volatile void __iomem *) addr);
+ writeb(b, addr + PCI_IOBASE);
}
static inline void outw(u16 b, unsigned long addr)
{
- writew(b, (volatile void __iomem *) addr);
+ writew(b, addr + PCI_IOBASE);
}
static inline void outl(u32 b, unsigned long addr)
{
- writel(b, (volatile void __iomem *) addr);
+ writel(b, addr + PCI_IOBASE);
}
#define inb_p(addr) inb(addr)
@@ -213,32 +217,32 @@ static inline void outsl(unsigned long addr, const void *buffer, int count)
static inline void readsl(const void __iomem *addr, void *buf, int len)
{
- insl((unsigned long)addr, buf, len);
+ insl(addr - PCI_IOBASE, buf, len);
}
static inline void readsw(const void __iomem *addr, void *buf, int len)
{
- insw((unsigned long)addr, buf, len);
+ insw(addr - PCI_IOBASE, buf, len);
}
static inline void readsb(const void __iomem *addr, void *buf, int len)
{
- insb((unsigned long)addr, buf, len);
+ insb(addr - PCI_IOBASE, buf, len);
}
static inline void writesl(const void __iomem *addr, const void *buf, int len)
{
- outsl((unsigned long)addr, buf, len);
+ outsl(addr - PCI_IOBASE, buf, len);
}
static inline void writesw(const void __iomem *addr, const void *buf, int len)
{
- outsw((unsigned long)addr, buf, len);
+ outsw(addr - PCI_IOBASE, buf, len);
}
static inline void writesb(const void __iomem *addr, const void *buf, int len)
{
- outsb((unsigned long)addr, buf, len);
+ outsb(addr - PCI_IOBASE, buf, len);
}
#ifndef CONFIG_GENERIC_IOMAP
@@ -269,8 +273,9 @@ static inline void writesb(const void __iomem *addr, const void *buf, int len)
outsl((unsigned long) (p), (src), (count))
#endif /* CONFIG_GENERIC_IOMAP */
-
-#define IO_SPACE_LIMIT 0xffffffff
+#ifndef IO_SPACE_LIMIT
+#define IO_SPACE_LIMIT 0xffff
+#endif
#ifdef __KERNEL__
next prev parent reply other threads:[~2011-02-17 17:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 7:49 Guan Xuetao
2011-02-17 17:14 ` Arnd Bergmann [this message]
2011-02-22 10:54 ` Guan Xuetao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201102171814.29081.arnd@arndb.de \
--to=arnd@arndb.de \
--cc=greg@kroah.com \
--cc=gxt@mprc.pku.edu.cn \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome