mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
	NeilBrown <neilb@suse.de>
Subject: [24/73] md: avoid spinlock problem in blk_throtl_exit
Date: Fri, 04 Mar 2011 16:55:29 -0800	[thread overview]
Message-ID: <20110305005636.923246161@clark.kroah.org> (raw)
In-Reply-To: <20110305005720.GA16162@kroah.com>

2.6.37-stable review patch.  If anyone has any objections, please let us know.

------------------

From: NeilBrown <neilb@suse.de>

commit da9cf5050a2e3dbc3cf26a8d908482eb4485ed49 upstream.

blk_throtl_exit assumes that ->queue_lock still exists,
so make sure that it does.
To do this, we stop redirecting ->queue_lock to conf->device_lock
and leave it pointing where it is initialised - __queue_lock.

As the blk_plug functions check the ->queue_lock is held, we now
take that spin_lock explicitly around the plug functions.  We don't
need the locking, just the warning removal.

This is needed for any kernel with the blk_throtl code, which is
which is 2.6.37 and later.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/md/linear.c    |    1 -
 drivers/md/multipath.c |    1 -
 drivers/md/raid0.c     |    1 -
 drivers/md/raid1.c     |    6 ++++--
 drivers/md/raid10.c    |    7 ++++---
 drivers/md/raid5.c     |    1 -
 6 files changed, 8 insertions(+), 9 deletions(-)

--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -216,7 +216,6 @@ static int linear_run (mddev_t *mddev)
 
 	if (md_check_no_bitmap(mddev))
 		return -EINVAL;
-	mddev->queue->queue_lock = &mddev->queue->__queue_lock;
 	conf = linear_conf(mddev, mddev->raid_disks);
 
 	if (!conf)
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -435,7 +435,6 @@ static int multipath_run (mddev_t *mddev
 	 * bookkeeping area. [whatever we allocate in multipath_run(),
 	 * should be freed in multipath_stop()]
 	 */
-	mddev->queue->queue_lock = &mddev->queue->__queue_lock;
 
 	conf = kzalloc(sizeof(multipath_conf_t), GFP_KERNEL);
 	mddev->private = conf;
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -353,7 +353,6 @@ static int raid0_run(mddev_t *mddev)
 	if (md_check_no_bitmap(mddev))
 		return -EINVAL;
 	blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
-	mddev->queue->queue_lock = &mddev->queue->__queue_lock;
 
 	/* if private is not null, we are here after takeover */
 	if (mddev->private == NULL) {
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -593,7 +593,10 @@ static int flush_pending_writes(conf_t *
 	if (conf->pending_bio_list.head) {
 		struct bio *bio;
 		bio = bio_list_get(&conf->pending_bio_list);
+		/* Only take the spinlock to quiet a warning */
+		spin_lock(conf->mddev->queue->queue_lock);
 		blk_remove_plug(conf->mddev->queue);
+		spin_unlock(conf->mddev->queue->queue_lock);
 		spin_unlock_irq(&conf->device_lock);
 		/* flush any pending bitmap writes to
 		 * disk before proceeding w/ I/O */
@@ -959,7 +962,7 @@ static int make_request(mddev_t *mddev,
 		atomic_inc(&r1_bio->remaining);
 		spin_lock_irqsave(&conf->device_lock, flags);
 		bio_list_add(&conf->pending_bio_list, mbio);
-		blk_plug_device(mddev->queue);
+		blk_plug_device_unlocked(mddev->queue);
 		spin_unlock_irqrestore(&conf->device_lock, flags);
 	}
 	r1_bio_write_done(r1_bio, bio->bi_vcnt, behind_pages, behind_pages != NULL);
@@ -2024,7 +2027,6 @@ static int run(mddev_t *mddev)
 	if (IS_ERR(conf))
 		return PTR_ERR(conf);
 
-	mddev->queue->queue_lock = &conf->device_lock;
 	list_for_each_entry(rdev, &mddev->disks, same_set) {
 		disk_stack_limits(mddev->gendisk, rdev->bdev,
 				  rdev->data_offset << 9);
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -662,7 +662,10 @@ static int flush_pending_writes(conf_t *
 	if (conf->pending_bio_list.head) {
 		struct bio *bio;
 		bio = bio_list_get(&conf->pending_bio_list);
+		/* Spinlock only taken to quiet a warning */
+		spin_lock(conf->mddev->queue->queue_lock);
 		blk_remove_plug(conf->mddev->queue);
+		spin_unlock(conf->mddev->queue->queue_lock);
 		spin_unlock_irq(&conf->device_lock);
 		/* flush any pending bitmap writes to disk
 		 * before proceeding w/ I/O */
@@ -971,7 +974,7 @@ static int make_request(mddev_t *mddev,
 		atomic_inc(&r10_bio->remaining);
 		spin_lock_irqsave(&conf->device_lock, flags);
 		bio_list_add(&conf->pending_bio_list, mbio);
-		blk_plug_device(mddev->queue);
+		blk_plug_device_unlocked(mddev->queue);
 		spin_unlock_irqrestore(&conf->device_lock, flags);
 	}
 
@@ -2303,8 +2306,6 @@ static int run(mddev_t *mddev)
 	if (!conf)
 		goto out;
 
-	mddev->queue->queue_lock = &conf->device_lock;
-
 	mddev->thread = conf->thread;
 	conf->thread = NULL;
 
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -5205,7 +5205,6 @@ static int run(mddev_t *mddev)
 
 		mddev->queue->backing_dev_info.congested_data = mddev;
 		mddev->queue->backing_dev_info.congested_fn = raid5_congested;
-		mddev->queue->queue_lock = &conf->device_lock;
 		mddev->queue->unplug_fn = raid5_unplug_queue;
 
 		chunk_size = mddev->chunk_sectors << 9;



  parent reply	other threads:[~2011-03-05  1:15 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-05  0:57 [00/73] 2.6.37.3-stable review Greg KH
2011-03-05  0:55 ` [01/73] usb: musb: omap2430: fix kernel panic on reboot Greg KH
2011-03-05  0:55 ` [02/73] USB: add quirks entry for Keytouch QWERTY Panel Greg KH
2011-03-05  0:55 ` [03/73] USB: Add Samsung SGH-I500/Android modem ID switch to visor driver Greg KH
2011-03-05  0:55 ` [04/73] USB: Add quirk for Samsung Android phone modem Greg KH
2011-03-05  0:55 ` [05/73] USB: serial/usb_wwan, fix tty NULL dereference Greg KH
2011-03-05  0:55 ` [06/73] sierra: add new ID for Airprime/Sierra USB IP modem Greg KH
2011-03-05  0:55 ` [07/73] Revert "Bluetooth: Enable USB autosuspend by default on btusb" Greg KH
2011-03-05  0:55 ` [08/73] p54pci: update receive dma buffers before and after processing Greg KH
2011-03-05  0:55 ` [09/73] Revert "drm/radeon/kms: switch back to min->max pll post divider iteration" Greg KH
2011-03-05  0:55 ` [10/73] tcp: fix inet_twsk_deschedule() Greg KH
2011-03-05  0:55 ` [11/73] mm: prevent concurrent unmap_mapping_range() on the same inode Greg KH
2011-03-05  0:55 ` [12/73] staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel Greg KH
2011-03-05  0:55 ` [13/73] staging: brcm80211: bugfix for softmac crash on multi cpu configurations Greg KH
2011-03-05  0:55 ` [14/73] staging: usbip: vhci: update reference count for usb_device Greg KH
2011-03-05  0:55 ` [15/73] staging: usbip: vhci: give back URBs from in-flight unlink requests Greg KH
2011-03-05  0:55 ` [16/73] staging: usbip: vhci: refuse to enqueue for dead connections Greg KH
2011-03-05  0:55 ` [17/73] staging: usbip: vhci: use urb->dev->portnum to find port Greg KH
2011-03-05  0:55 ` [18/73] epoll: prevent creating circular epoll structures Greg KH
2011-03-05  0:55 ` [19/73] swiotlb: fix wrong panic Greg KH
2011-03-05  0:55 ` [20/73] ldm: corrupted partition table can cause kernel oops Greg KH
2011-03-05  0:55 ` [21/73] drivers/rtc/rtc-ds3232.c: fix time range difference between linux and RTC chip Greg KH
2011-03-05  0:55 ` [22/73] mm: fix dubious code in __count_immobile_pages() Greg KH
2011-03-05  0:55 ` [23/73] md: correctly handle probe of an mdp device Greg KH
2011-03-05  0:55 ` Greg KH [this message]
2011-03-05  0:55 ` [25/73] md: Fix - again - partition detection when array becomes active Greg KH
2011-03-05  0:55 ` [26/73] Fix over-zealous flush_disk when changing device size Greg KH
2011-03-05  0:55 ` [27/73] PM: Make ACPI wakeup from S5 work again when CONFIG_PM_SLEEP is unset Greg KH
2011-03-05  0:55 ` [28/73] x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems Greg KH
2011-03-05  0:55 ` [29/73] xhci: Avoid BUG() in interrupt context Greg KH
2011-03-05  0:55 ` [30/73] xhci: Clarify some expressions in the TRB math Greg KH
2011-03-05  0:55 ` [31/73] xhci: Fix errors in the running total calculations " Greg KH
2011-03-05  0:55 ` [32/73] xhci: Fix an error in count_sg_trbs_needed() Greg KH
2011-03-05  0:55 ` [33/73] USB: Reset USB 3.0 devices on (re)discovery Greg KH
2011-03-05  0:55 ` [34/73] USB: prevent buggy hubs from crashing the USB stack Greg KH
2011-03-05  0:55 ` [35/73] usb: musb: core: set has_tt flag Greg KH
2011-03-05  0:55 ` [36/73] ALSA: HDA: Add a new Conexant codec 506e (20590) Greg KH
2011-03-05  0:55 ` [37/73] ALSA: usb-audio: fix oops due to cleanup race when disconnecting Greg KH
2011-03-05  0:55 ` [38/73] ALSA: HDA: Fix mic initialization in VIA auto parser Greg KH
2011-03-05  0:55 ` [39/73] ALSA: HDA: Add ideapad quirk for two Dell machines Greg KH
2011-03-05  0:55 ` [40/73] ocfs2: Check heartbeat mode for kernel stacks only Greg KH
2011-03-05  0:55 ` [41/73] Ocfs2/refcounttree: Fix a bug for refcounttree to writeback clusters in a right number Greg KH
2011-03-05  0:55 ` [42/73] drm: fix unsigned vs signed comparison issue in modeset ctl ioctl Greg KH
2011-03-05  0:55 ` [43/73] ACPI / debugfs: Fix buffer overflows, double free Greg KH
2011-03-05  0:55 ` [44/73] mfd: Avoid tps6586x burst writes Greg KH
2011-03-05  0:55 ` [45/73] mfd: Fix NULL pointer due to non-initialized ucb1x00-ts absinfo Greg KH
2011-03-05  0:55 ` [46/73] x86: Use u32 instead of long to set reset vector back to 0 Greg KH
2011-03-05  0:55 ` [47/73] Bluetooth: add Atheros BT AR9285 fw supported Greg KH
2011-03-05  0:55 ` [48/73] Bluetooth: fix crash with quirky dongles doing sound Greg KH
2011-03-05  0:55 ` [49/73] Bluetooth: Add Atheros BT AR5BBU12 fw supported Greg KH
2011-03-05  0:55 ` [50/73] eukrea-tlv320: fix platform_name Greg KH
2011-03-05  0:55 ` [51/73] ASoC: correct pxa AC97 DAI names Greg KH
2011-03-05  0:55 ` [52/73] fuse: fix hang of single threaded fuseblk filesystem Greg KH
2011-03-05  0:55 ` [53/73] clockevents: Prevent oneshot mode when broadcast device is periodic Greg KH
2011-03-05  0:55 ` [54/73] ext2: Fix link count corruption under heavy link+rename load Greg KH
2011-03-05  0:56 ` [55/73] mm: vmstat: use a single setter function and callback for adjusting percpu thresholds Greg KH
2011-03-05  0:56 ` [56/73] e1000e: 82579 PHY incorrectly identified during init Greg KH
2011-03-05  0:56 ` [57/73] Staging: comedi: Add MODULE_LICENSE and similar to NI modules Greg KH
2011-03-05  0:56 ` [58/73] fix cfg80211_wext_siwfreq lock ordering Greg KH
2011-03-05  0:56 ` [59/73] tg3: Restrict phy ioctl access Greg KH
2011-03-05  0:56 ` [60/73] drm/i915: fix memory corruption with GM965 and >4GB RAM Greg KH
2011-03-05  0:56 ` [61/73] blk-throttle: Do not use kblockd workqueue for throtl work Greg KH
2011-03-05  0:56 ` [62/73] block: add @force_kblockd to __blk_run_queue() Greg KH
2011-03-05  0:56 ` [63/73] block: blk-flush shouldnt call directly into q->request_fn() __blk_run_queue() Greg KH
2011-03-05  0:56 ` [64/73] block: kill loop_mutex Greg KH
2011-03-05  0:56 ` [65/73] ath9k_htc: Fix an endian issue Greg KH
2011-03-05  0:56 ` [66/73] p54usb: add Senao NUB-350 usbid Greg KH
2011-03-05  0:56 ` [67/73] nilfs2: fix regression that i-flag is not set on changeless checkpoints Greg KH
2011-03-05  0:56 ` [68/73] carl9170: add Airlive X.USB a/b/g/n USBID Greg KH
2011-03-05  0:56 ` [69/73] r8169: disable ASPM Greg KH
2011-03-05  0:56 ` [70/73] dccp: fix oops on Reset after close Greg KH
2011-03-05  0:56 ` [71/73] e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup instead Greg KH
2011-03-05  0:56 ` [72/73] DNS: Fix a NULL pointer deref when trying to read an error key [CVE-2011-1076] Greg KH
2011-03-05  0:56 ` [73/73] arp_notify: unconditionally send gratuitous ARP for NETDEV_NOTIFY_PEERS Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110305005636.923246161@clark.kroah.org \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neilb@suse.de \
    --cc=stable-review@kernel.org \
    --cc=stable@kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®