From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Bob Liu <lliubbo@gmail.com>
Cc: linux-kernel@vger.kernel.org, mchehab@redhat.com,
hverkuil@xs4all.nl, sakari.ailus@maxwell.research.nokia.com,
martin_rubli@logitech.com, jarod@redhat.com, tj@kernel.org,
arnd@arndb.de, fweisbec@gmail.com, agust@denx.de, gregkh@suse.de,
vapier.adi@gmail.com, uclinux-dist-devel@blackfin.uclinux.org
Subject: Re: [PATCH] media: uvc_driver: add NO-MMU arch support
Date: Thu, 10 Mar 2011 12:03:30 +0100 [thread overview]
Message-ID: <201103101203.31563.laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <1299725077-13839-1-git-send-email-lliubbo@gmail.com>
Hi Bob,
Thanks for the patch.
On Thursday 10 March 2011 03:44:37 Bob Liu wrote:
> UVC driver used to have partial no-mmu arch support, but it's removed by
> commit c29fcff3daafbf46d64a543c1950bbd206ad8c1c.
>
> This patch added them back and expanded to fully support no-mmu arch, so
> that uvc cameras can be used on no-mmu platforms like Blackfin.
>
> Signed-off-by: Bob Liu <lliubbo@gmail.com>
> ---
> drivers/media/video/uvc/uvc_v4l2.c | 36
> ++++++++++++++++++++++++++++++++++++ drivers/media/video/v4l2-dev.c |
> 18 ++++++++++++++++++
> drivers/usb/gadget/uvc_queue.c | 15 +++++++++++++++
> include/media/v4l2-dev.h | 2 ++
> 4 files changed, 71 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/media/video/uvc/uvc_v4l2.c
> b/drivers/media/video/uvc/uvc_v4l2.c index 9005a8d..2413ec9 100644
> --- a/drivers/media/video/uvc/uvc_v4l2.c
> +++ b/drivers/media/video/uvc/uvc_v4l2.c
> @@ -1081,6 +1081,39 @@ static unsigned int uvc_v4l2_poll(struct file *file,
> poll_table *wait) return uvc_queue_poll(&stream->queue, file, wait);
> }
>
> +#ifndef CONFIG_MMU
> +static unsigned long uvc_v4l2_get_unmapped_area(struct file *file,
> + unsigned long addr, unsigned long len, unsigned long pgoff,
> + unsigned long flags)
> +{
> + struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
> + struct uvc_streaming *stream = handle->stream;
> + struct uvc_video_queue *queue = &stream->queue;
> + struct uvc_buffer *uninitialized_var(buffer);
> + unsigned int i;
> + int ret = 0;
> +
> + mutex_lock(&queue->mutex);
> + for (i = 0; i < queue->count; ++i) {
> + buffer = &queue->buffer[i];
> + if ((buffer->buf.m.offset >> PAGE_SHIFT) == pgoff)
> + break;
> + }
> +
> + if (i == queue->count ||
> + PAGE_ALIGN(len) != queue->buf_size) {
> + ret = -EINVAL;
> + goto done;
> + }
> +
> + addr = (unsigned long)queue->mem + buffer->buf.m.offset;
> + ret = addr;
> +done:
> + mutex_unlock(&queue->mutex);
> + return ret;
> +}
> +#endif
> +
Could you move the core of this function to uvc_queue.c ? Something like
unsigned long uvc_queue_get_unmapped_area(struct uvc_video_queue *queue,
unsigned long addr, unsigned long len, unsigned long pgoff,
unsigned long flags),
static unsigned long uvc_v4l2_get_unmapped_area(struct file *file,
unsigned long addr, unsigned long len, unsigned long pgoff,
unsigned long flags)
{
struct uvc_fh *handle = (struct uvc_fh *)file->private_data;
struct uvc_streaming *stream = handle->stream;
return uvc_queue_get_unmapped_area(queue, addr, len, pgoff, flags);
}
> diff --git a/drivers/usb/gadget/uvc_queue.c
> b/drivers/usb/gadget/uvc_queue.c index f7395ac..24378fb 100644
> --- a/drivers/usb/gadget/uvc_queue.c
> +++ b/drivers/usb/gadget/uvc_queue.c
> @@ -431,6 +431,7 @@ uvc_queue_mmap(struct uvc_video_queue *queue, struct
> vm_area_struct *vma) break;
> }
>
> +#ifdef CONFIG_MMU
> if (i == queue->count || size != queue->buf_size) {
> ret = -EINVAL;
> goto done;
> @@ -452,6 +453,20 @@ uvc_queue_mmap(struct uvc_video_queue *queue, struct
> vm_area_struct *vma) addr += PAGE_SIZE;
> size -= PAGE_SIZE;
> }
> +#else
> + if (i == queue->count ||
> + PAGE_ALIGN(size) != queue->buf_size) {
> + ret = -EINVAL;
> + goto done;
> + }
> +
> + /* documentation/nommu-mmap.txt */
> + vma->vm_flags |= VM_IO | VM_MAYSHARE;
> +
> + addr = (unsigned long)queue->mem + buffer->buf.m.offset;
> + vma->vm_start = addr;
> + vma->vm_end = addr + queue->buf_size;
> +#endif
>
> vma->vm_ops = &uvc_vm_ops;
> vma->vm_private_data = buffer;
Note that uvc_queue.c will be replaced by videobuf2 in the (near ?) future.
NOMMU support will thus be removed once again. If you want to keep it, you
should add a patch to videobuf2 to implement NOMMU support there.
--
Regards,
Laurent Pinchart
prev parent reply other threads:[~2011-03-10 11:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-10 2:44 Bob Liu
2011-03-10 11:03 ` Laurent Pinchart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201103101203.31563.laurent.pinchart@ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=agust@denx.de \
--cc=arnd@arndb.de \
--cc=fweisbec@gmail.com \
--cc=gregkh@suse.de \
--cc=hverkuil@xs4all.nl \
--cc=jarod@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lliubbo@gmail.com \
--cc=martin_rubli@logitech.com \
--cc=mchehab@redhat.com \
--cc=sakari.ailus@maxwell.research.nokia.com \
--cc=tj@kernel.org \
--cc=uclinux-dist-devel@blackfin.uclinux.org \
--cc=vapier.adi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®