From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Subject: [patch 1/3] arm/gpio: Remove three copies of broken and racy debug code
Date: Thu, 24 Mar 2011 21:27:35 -0000 [thread overview]
Message-ID: <20110324212508.931638262@linutronix.de> (raw)
In-Reply-To: <20110324212330.292903803@linutronix.de>
[-- Attachment #1: remove-gpio-crap.patch --]
[-- Type: text/plain, Size: 4686 bytes --]
gpiolib plus two gpio implementations in arm fiddle in the guts of
irq_desc in a racy and buggy way. Remove the stuff. I already told the
gpio folks that we can provide that information in a proper way if
necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/arm/mach-ep93xx/gpio.c | 39 -------------------------------------
arch/arm/plat-nomadik/gpio.c | 45 -------------------------------------------
drivers/gpio/gpiolib.c | 45 -------------------------------------------
3 files changed, 129 deletions(-)
Index: linux-2.6-tip/arch/arm/mach-ep93xx/gpio.c
===================================================================
--- linux-2.6-tip.orig/arch/arm/mach-ep93xx/gpio.c
+++ linux-2.6-tip/arch/arm/mach-ep93xx/gpio.c
@@ -366,45 +366,6 @@ static void ep93xx_gpio_dbg_show(struct
gpiochip_is_requested(chip, i) ? : "",
is_out ? "out" : "in ",
(data_reg & (1 << i)) ? "hi" : "lo");
-
- if (!is_out) {
- int irq = gpio_to_irq(gpio);
- struct irq_desc *desc = irq_desc + irq;
-
- if (irq >= 0 && desc->action) {
- char *trigger;
-
- switch (desc->status & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_NONE:
- trigger = "(default)";
- break;
- case IRQ_TYPE_EDGE_FALLING:
- trigger = "edge-falling";
- break;
- case IRQ_TYPE_EDGE_RISING:
- trigger = "edge-rising";
- break;
- case IRQ_TYPE_EDGE_BOTH:
- trigger = "edge-both";
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- trigger = "level-high";
- break;
- case IRQ_TYPE_LEVEL_LOW:
- trigger = "level-low";
- break;
- default:
- trigger = "?trigger?";
- break;
- }
-
- seq_printf(s, " irq-%d %s%s",
- irq, trigger,
- (desc->status & IRQ_WAKEUP)
- ? " wakeup" : "");
- }
- }
-
seq_printf(s, "\n");
}
}
Index: linux-2.6-tip/arch/arm/plat-nomadik/gpio.c
===================================================================
--- linux-2.6-tip.orig/arch/arm/plat-nomadik/gpio.c
+++ linux-2.6-tip/arch/arm/plat-nomadik/gpio.c
@@ -832,51 +832,6 @@ static void nmk_gpio_dbg_show(struct seq
: "? ",
(mode < 0) ? "unknown" : modes[mode],
pull ? "pull" : "none");
-
- if (!is_out) {
- int irq = gpio_to_irq(gpio);
- struct irq_desc *desc = irq_to_desc(irq);
-
- /* This races with request_irq(), set_irq_type(),
- * and set_irq_wake() ... but those are "rare".
- *
- * More significantly, trigger type flags aren't
- * currently maintained by genirq.
- */
- if (irq >= 0 && desc->action) {
- char *trigger;
-
- switch (desc->status & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_NONE:
- trigger = "(default)";
- break;
- case IRQ_TYPE_EDGE_FALLING:
- trigger = "edge-falling";
- break;
- case IRQ_TYPE_EDGE_RISING:
- trigger = "edge-rising";
- break;
- case IRQ_TYPE_EDGE_BOTH:
- trigger = "edge-both";
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- trigger = "level-high";
- break;
- case IRQ_TYPE_LEVEL_LOW:
- trigger = "level-low";
- break;
- default:
- trigger = "?trigger?";
- break;
- }
-
- seq_printf(s, " irq-%d %s%s",
- irq, trigger,
- (desc->status & IRQ_WAKEUP)
- ? " wakeup" : "");
- }
- }
-
seq_printf(s, "\n");
}
}
Index: linux-2.6-tip/drivers/gpio/gpiolib.c
===================================================================
--- linux-2.6-tip.orig/drivers/gpio/gpiolib.c
+++ linux-2.6-tip/drivers/gpio/gpiolib.c
@@ -1656,51 +1656,6 @@ static void gpiolib_dbg_show(struct seq_
chip->get
? (chip->get(chip, i) ? "hi" : "lo")
: "? ");
-
- if (!is_out) {
- int irq = gpio_to_irq(gpio);
- struct irq_desc *desc = irq_to_desc(irq);
-
- /* This races with request_irq(), set_irq_type(),
- * and set_irq_wake() ... but those are "rare".
- *
- * More significantly, trigger type flags aren't
- * currently maintained by genirq.
- */
- if (irq >= 0 && desc->action) {
- char *trigger;
-
- switch (desc->status & IRQ_TYPE_SENSE_MASK) {
- case IRQ_TYPE_NONE:
- trigger = "(default)";
- break;
- case IRQ_TYPE_EDGE_FALLING:
- trigger = "edge-falling";
- break;
- case IRQ_TYPE_EDGE_RISING:
- trigger = "edge-rising";
- break;
- case IRQ_TYPE_EDGE_BOTH:
- trigger = "edge-both";
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- trigger = "level-high";
- break;
- case IRQ_TYPE_LEVEL_LOW:
- trigger = "level-low";
- break;
- default:
- trigger = "?trigger?";
- break;
- }
-
- seq_printf(s, " irq-%d %s%s",
- irq, trigger,
- (desc->status & IRQ_WAKEUP)
- ? " wakeup" : "");
- }
- }
-
seq_printf(s, "\n");
}
}
next prev parent reply other threads:[~2011-03-24 21:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-24 21:27 [patch 0/3] gpio: Final genirq cleanups Thomas Gleixner
2011-03-24 21:27 ` Thomas Gleixner [this message]
2011-03-24 21:41 ` [patch 1/3] arm/gpio: Remove three copies of broken and racy debug code Ryan Mallon
2011-03-24 22:43 ` Thomas Gleixner
2011-03-24 21:27 ` [patch 2/3] gpio: Cleanup genirq namespace Thomas Gleixner
2011-03-24 21:27 ` [patch 3/3] gpio: Fold irq_set_chip/irq_set_handler to irq_set_chip_and_handler Thomas Gleixner
2011-03-24 21:40 ` [patch 0/3] gpio: Final genirq cleanups Grant Likely
2011-03-24 21:49 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110324212508.931638262@linutronix.de \
--to=tglx@linutronix.de \
--cc=grant.likely@secretlab.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®