From: Borislav Petkov <bp@alien8.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.6.39-rc7
Date: Sun, 15 May 2011 15:50:37 +0200 [thread overview]
Message-ID: <20110515135037.GA26111@liondog.tnic> (raw)
In-Reply-To: <BANLkTi=9fGdBw=r_dDE3KSPfjU0UjXBZFw@mail.gmail.com>
On Mon, May 09, 2011 at 07:49:48PM -0700, Linus Torvalds wrote:
> But please do test, just to make sure that 39-final is good.
I'm hitting a warn_on in the gendisk events code; happens after plugging
an ipod through usb. Adding Tejun.
[49045.176773] usb 1-3.1: new high speed USB device number 5 using ehci_hcd
[49045.287681] usb 1-3.1: New USB device found, idVendor=05ac, idProduct=1263
[49045.287697] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[49045.287707] usb 1-3.1: Product: iPod
[49045.287715] usb 1-3.1: Manufacturer: Apple Inc.
[49045.294369] scsi5 : usb-storage 1-3.1:1.0
[49046.300561] scsi 5:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[49046.350703] sd 5:0:0:0: [sdc] 3944897 4096-byte logical blocks: (16.1 GB/15.0 GiB)
[49046.354059] sd 5:0:0:0: [sdc] Write Protect is off
[49046.354071] sd 5:0:0:0: [sdc] Mode Sense: 68 00 00 08
[49046.354078] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[49046.357265] sd 5:0:0:0: [sdc] 3944897 4096-byte logical blocks: (16.1 GB/15.0 GiB)
[49046.358222] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[49046.359584] sdc: sdc1
[49046.363303] sd 5:0:0:0: [sdc] 3944897 4096-byte logical blocks: (16.1 GB/15.0 GiB)
[49046.364265] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[49046.364290] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[49739.003924] ------------[ cut here ]------------
[49739.003946] WARNING: at block/genhd.c:1556 disk_clear_events+0xca/0x101()
[49739.003954] Hardware name: System Product Name
[49739.003961] Modules linked in: nls_iso8859_15 nls_cp437 usblp tun powernow_k8 mperf cpufreq_ondemand cpufreq_powersave cpufreq_userspace cpufreq_conservative cpufreq_stats freq_table binfmt_misc kvm_amd kvm fuse ipv6 vfat fat 8250_pnp 8250 edac_core serial_core ohci_hcd k10temp
[49739.004043] Pid: 11237, comm: hald-addon-stor Not tainted 2.6.39-rc7 #1
[49739.004050] Call Trace:
[49739.004067] [<ffffffff8144673e>] ? _raw_spin_unlock_irqrestore+0x38/0x69
[49739.004082] [<ffffffff810383ee>] warn_slowpath_common+0x85/0x9d
[49739.004094] [<ffffffff81038420>] warn_slowpath_null+0x1a/0x1c
[49739.004104] [<ffffffff81190b97>] disk_clear_events+0xca/0x101
[49739.004117] [<ffffffff811159b9>] check_disk_change+0x27/0x5f
[49739.004129] [<ffffffff813051e4>] sd_open+0x86/0x12d
[49739.004139] [<ffffffff81191eae>] ? disk_get_part+0x22/0x128
[49739.004150] [<ffffffff811168ce>] __blkdev_get+0xb0/0x34c
[49739.004161] [<ffffffff81116d62>] blkdev_get+0x1f8/0x32a
[49739.004172] [<ffffffff81030494>] ? sub_preempt_count+0xa3/0xb6
[49739.004182] [<ffffffff814467a4>] ? _raw_spin_unlock+0x35/0x52
[49739.004194] [<ffffffff81116f1d>] blkdev_open+0x89/0x8d
[49739.004205] [<ffffffff810e6dc9>] __dentry_open+0x250/0x37b
[49739.004216] [<ffffffff81116e94>] ? blkdev_get+0x32a/0x32a
[49739.004227] [<ffffffff810e6fbf>] nameidata_to_filp+0x60/0x67
[49739.004238] [<ffffffff810f4ff8>] do_last+0x5c4/0x6b8
[49739.004250] [<ffffffff810f6167>] path_openat+0xca/0x363
[49739.004261] [<ffffffff8105d941>] ? local_clock+0x2a/0x3b
[49739.004272] [<ffffffff81101357>] ? alloc_fd+0x1bc/0x1ce
[49739.004284] [<ffffffff810f64f9>] do_filp_open+0x3d/0x8c
[49739.004294] [<ffffffff814467a4>] ? _raw_spin_unlock+0x35/0x52
[49739.004305] [<ffffffff81101357>] ? alloc_fd+0x1bc/0x1ce
[49739.004316] [<ffffffff810e697d>] do_sys_open+0x110/0x1a9
[49739.004327] [<ffffffff810e6a49>] sys_open+0x20/0x22
[49739.004338] [<ffffffff814472eb>] system_call_fastpath+0x16/0x1b
[49739.004347] ---[ end trace 0e6e57542dc517bf ]---
--
Regards/Gruss,
Boris.
next prev parent reply other threads:[~2011-05-15 13:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-10 2:49 Linus Torvalds
2011-05-10 3:53 ` Konrad Rzeszutek Wilk
2011-05-10 23:36 ` Konrad Rzeszutek Wilk
2011-05-10 23:42 ` H. Peter Anvin
2011-05-12 16:49 ` [2.6.39 regression] i915/kms: garbled screen because of 49183b281 (was: Re: Linux 2.6.39-rc7) Melchior FRANZ
2011-05-12 18:52 ` [PATCH] Revert "drm/i915: Only enable the plane after setting the fb base (pre-ILK)" Keith Packard
2011-05-12 21:41 ` [2.6.39 regression] i915/kms: garbled screen because of 49183b281 (was: Re: Linux 2.6.39-rc7) Chris Wilson
2011-05-13 11:59 ` Melchior FRANZ
2011-05-30 12:10 ` [3.0-rc1 regression] (was: Re: [2.6.39 regression] i915/kms: garbled screen because of 49183b281) Melchior FRANZ
2011-05-15 13:50 ` Borislav Petkov [this message]
2011-05-15 13:53 ` Linux 2.6.39-rc7 Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110515135037.GA26111@liondog.tnic \
--to=bp@alien8.de \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®