mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
	akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
	Eric Dumazet <eric.dumazet@gmail.com>,
	John Stultz <johnstul@us.ibm.com>
Subject: [05/21] Fix time() inconsistencies caused by intermediate xtime_cache values being read
Date: Thu, 19 May 2011 11:23:35 -0700	[thread overview]
Message-ID: <20110519182436.801262289@clark.kroah.org> (raw)
In-Reply-To: <20110519182446.GA23751@kroah.com>

2.6.32-longterm review patch.  If anyone has any objections, please let us know.

------------------


Currently with 2.6.32-longterm, its possible for time() to occasionally
return values one second earlier then the previous time() call.

This happens because update_xtime_cache() does:
	xtime_cache = xtime;
	timespec_add_ns(&xtime_cache, nsec);

Its possible that xtime is 1sec,999msecs, and nsecs is 1ms, resulting in
a xtime_cache that is 2sec,0ms.

get_seconds() (which is used by sys_time()) does not take the
xtime_lock, which is ok as the xtime.tv_sec value is a long and can be
atomically read safely.

The problem occurs the next call to update_xtime_cache() if xtime has
not increased:
	/* This sets xtime_cache back to 1sec, 999msec */
	xtime_cache = xtime; 
	/* get_seconds, calls here, and sees a 1second inconsistency */
	timespec_add_ns(&xtime_cache, nsec);


In order to resolve this, we could add locking to get_seconds(), but it
needs to be lock free, as it is called from the machine check handler,
opening a possible deadlock.

So instead, this patch introduces an intermediate value for the
calculations, so that we only assign xtime_cache once with the correct
time, using ACCESS_ONCE to make sure the compiler doesn't optimize out
any intermediate values.

The xtime_cache manipulations were removed with 2.6.35, so that kernel
and later do not need this change.

In 2.6.33 and 2.6.34 the logarithmic accumulation should make it so
xtime is updated each tick, so it is unlikely that two updates to
xtime_cache could occur while the difference between xtime and
xtime_cache crosses the second boundary. However, the paranoid might
want to pull this into 2.6.33/34-longterm just to be sure.

Thanks to Stephen for helping finally narrow down the root cause and
many hours of help with testing and validation. Also thanks to Max,
Andi, Eric and Paul for review of earlier attempts and helping clarify
what is possible with regard to out of order execution.

Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 kernel/time/timekeeping.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -168,8 +168,15 @@ int __read_mostly timekeeping_suspended;
 static struct timespec xtime_cache __attribute__ ((aligned (16)));
 void update_xtime_cache(u64 nsec)
 {
-	xtime_cache = xtime;
-	timespec_add_ns(&xtime_cache, nsec);
+	/*
+	 * Use temporary variable so get_seconds() cannot catch
+	 * an intermediate xtime_cache.tv_sec value.
+	 * The ACCESS_ONCE() keeps the compiler from optimizing
+	 * out the intermediate value.
+	 */
+	struct timespec ts = xtime;
+	timespec_add_ns(&ts, nsec);
+	ACCESS_ONCE(xtime_cache) = ts;
 }
 
 /* must hold xtime_lock */



  parent reply	other threads:[~2011-05-19 18:25 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-19 18:24 [00/21] 2.6.32.41-longterm review Greg KH
2011-05-19 18:23 ` [01/21] cifs: check for bytes_remaining going to zero in CIFS_SessSetup Greg KH
2011-05-19 18:23 ` [02/21] Validate size of EFI GUID partition entries Greg KH
2011-05-19 18:23 ` [03/21] dccp: handle invalid feature options length Greg KH
2011-05-19 18:23 ` [04/21] CIFS: Fix memory over bound bug in cifs_parse_mount_options Greg KH
2011-05-19 18:23 ` Greg KH [this message]
2011-05-19 20:33   ` [Stable-review] [05/21] Fix time() inconsistencies caused by intermediate xtime_cache values being read Ben Hutchings
2011-05-19 18:23 ` [06/21] ehea: fix wrongly reported speed and port Greg KH
2011-05-19 18:23 ` [07/21] NET: slip, fix ldisc->open retval Greg KH
2011-05-19 18:23 ` [08/21] ne-h8300: Fix regression caused during net_device_ops conversion Greg KH
2011-05-19 18:23 ` [09/21] hydra: " Greg KH
2011-05-19 18:23 ` [10/21] libertas: fix cmdpendingq locking Greg KH
2011-05-19 18:23 ` [11/21] zorro8390: Fix regression caused during net_device_ops conversion Greg KH
2011-05-19 18:23 ` [12/21] cifs: add fallback in is_path_accessible for old servers Greg KH
2011-05-19 18:23 ` [13/21] Revert "x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors" Greg KH
2011-05-19 18:23 ` [14/21] x86, AMD: Fix ARAT feature setting again Greg KH
2011-05-19 18:23 ` [15/21] clocksource: Install completely before selecting Greg KH
2011-05-19 18:23 ` [16/21] tick: Clear broadcast active bit when switching to oneshot Greg KH
2011-05-19 18:23 ` [17/21] x86, apic: Fix spurious error interrupts triggering on all non-boot APs Greg KH
2011-05-19 18:23 ` [18/21] x86, mce, AMD: Fix leaving freed data in a list Greg KH
2011-05-19 18:23 ` [19/21] [SCSI] megaraid_sas: Sanity check user supplied length before passing it to dma_alloc_coherent() Greg KH
2011-05-19 18:23 ` [20/21] vmxnet3: Fix inconsistent LRO state after initialization Greg KH
2011-05-19 18:23 ` [21/21] netxen: Remove references to unified firmware file Greg KH
2011-05-19 18:30 ` [01/24] cifs: check for bytes_remaining going to zero in CIFS_SessSetup Greg KH
2011-05-19 18:30 ` [02/24] Validate size of EFI GUID partition entries Greg KH
2011-05-19 18:30 ` [03/24] x86, hw_breakpoints: Fix racy access to ptrace breakpoints Greg KH
2011-05-19 18:30 ` [04/24] ptrace: Prepare to fix racy accesses on task breakpoints Greg KH
2011-05-19 18:30 ` [05/24] dccp: handle invalid feature options length Greg KH
2011-05-19 18:30 ` [06/24] CIFS: Fix memory over bound bug in cifs_parse_mount_options Greg KH
2011-05-19 18:30 ` [07/24] tmpfs: fix race between umount and swapoff Greg KH
2011-05-21  4:52   ` Hugh Dickins
2011-05-19 18:30 ` [08/24] ehea: fix wrongly reported speed and port Greg KH
2011-05-19 18:30 ` [09/24] NET: slip, fix ldisc->open retval Greg KH
2011-05-19 18:30 ` [10/24] ne-h8300: Fix regression caused during net_device_ops conversion Greg KH
2011-05-19 18:30 ` [11/24] hydra: " Greg KH
2011-05-19 18:30 ` [12/24] libertas: fix cmdpendingq locking Greg KH
2011-05-19 18:30 ` [13/24] zorro8390: Fix regression caused during net_device_ops conversion Greg KH
2011-05-19 18:30 ` [14/24] fixes for using make 3.82 Greg KH
2011-05-19 18:30 ` [15/24] tmpfs: fix spurious ENOSPC when racing with unswap Greg KH
2011-05-20 17:49   ` Hugh Dickins
2011-05-21 21:49     ` Greg KH
2011-05-22  0:15       ` Hugh Dickins
2011-05-19 18:30 ` [16/24] cifs: add fallback in is_path_accessible for old servers Greg KH
2011-05-19 18:30 ` [17/24] Revert "x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors" Greg KH
2011-05-19 18:30 ` [18/24] x86, AMD: Fix ARAT feature setting again Greg KH
2011-05-19 18:30 ` [19/24] clocksource: Install completely before selecting Greg KH
2011-05-19 18:30 ` [20/24] tick: Clear broadcast active bit when switching to oneshot Greg KH
2011-05-19 18:30 ` [21/24] x86, apic: Fix spurious error interrupts triggering on all non-boot APs Greg KH
2011-05-19 18:30 ` [22/24] x86, mce, AMD: Fix leaving freed data in a list Greg KH
2011-05-19 18:30 ` [23/24] [SCSI] megaraid_sas: Sanity check user supplied length before passing it to dma_alloc_coherent() Greg KH
2011-05-19 18:30 ` [24/24] vmxnet3: Fix inconsistent LRO state after initialization Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110519182436.801262289@clark.kroah.org \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=eric.dumazet@gmail.com \
    --cc=johnstul@us.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable-review@kernel.org \
    --cc=stable@kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®