From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Daniel Haid <d.haid@gogi.tv>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Question about iommu on x86_64 and radeon driver.
Date: Mon, 23 May 2011 18:05:37 -0400 [thread overview]
Message-ID: <20110523220536.GB11961@dumpdata.com> (raw)
In-Reply-To: <6ac3f6faad655602b767aa14b355e982@admin.gogi.tv>
On Sun, May 22, 2011 at 10:56:27PM +0100, Daniel Haid wrote:
> Hello,
>
> I have an x86_64 system with a VIA chipset and 4GB of RAM. The
> mainboard
> is an ASUS M2V where the bios-setup has an option called "Map around
> memory hole" and I have an "ATI Technologies Inc RV710 [Radeon HD
There had to be more than 'Map around memory hole'? Was it called
GART or IOMMU?
> 4350]"
> graphics card according to lspci.
>
> Now one of the following things happen to my system:
>
> 1) With the bios-option enabled and no kernel parameters I get the
> following error:
>
> [drm:r600_ring_test] *ERROR* radeon: ring test failed
> (scratch(0x8504)=0xCAFEDEAD)
> radeon 0000:02:00.0: disabling GPU acceleration
>
> and then I can not use any 3d-acceleration. I also get the message
The problem you are hitting (I think) is that the AMD GART poor-man IOMMU is turned off
and the SWIOTLB is used instead. If you would like some technical
details, take a look at:
http://lists.freedesktop.org/archives/dri-devel/2011-January/006885.html
(the point #2 is what you are hitting).
>
> Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed
>
> 2) With the bios-option enabled and "mem=3072M" I can not use only
> 3GB of RAM,
> but the radeon card works.
>
> 3) With the bios-option enabled and "iommu=allowed" I get 4GB of RAM
> and
> the radeon card works. But I wonder whether this can have any bad
> effects?
Not sure why the AMD GART IOMMU gets disabled on VIA chipsets. You might
want to use 'git gui blame arch/x86/kernel/early-quirks.c' and look
at the code in question to figure that out.
>
> 4) Without the bios-option (and without any kernel parameters) I do not
> get the "Looks like a VIA chipset. Disabling IOMMU. Override with
> iommu=allowed"
> message, but strangely linux shows only about 3GB of RAM.
>
> I did not try other combinations. Now my questions are
>
> A) Is this a bug in the radeon driver? Or maybe not, since
> Documentation/x86/x86_64/boot-options.txt
> seems to imply that for >3GB an iommu is required?
Correct, and an IOMMU does get turned on. The SWIOTLB one.
>
> B) Is it safe to use iommu=allowed in my case ? If not, what
> problems will I encounter and what
> options should I use instead? Will I be stuck with 3GB of RAM?
Well, if everything works.... but you might just want to use
the git gui blame to take a look at the back-story of why the quirk
was added.
next prev parent reply other threads:[~2011-05-23 22:05 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-22 21:56 Daniel Haid
2011-05-23 22:05 ` Konrad Rzeszutek Wilk [this message]
2011-05-23 23:45 ` Daniel Haid
2011-05-24 15:50 ` Konrad Rzeszutek Wilk
2011-05-24 21:33 ` Daniel Haid
2011-05-25 12:58 ` Konrad Rzeszutek Wilk
2011-05-25 14:28 ` Daniel Haid
2011-05-24 22:48 ` Andi Kleen
2011-05-25 10:00 ` Daniel Haid
2011-05-25 12:57 ` Konrad Rzeszutek Wilk
2011-05-25 14:51 ` Daniel Haid
2011-05-25 20:21 ` Daniel Haid
2011-05-25 23:05 ` Andi Kleen
2011-05-27 15:48 ` Daniel Haid
2011-05-27 15:55 ` Konrad Rzeszutek Wilk
2011-05-27 22:20 ` Daniel Haid
2011-05-31 13:45 ` Konrad Rzeszutek Wilk
2011-05-31 15:34 ` Daniel Haid
2011-05-31 16:02 ` Konrad Rzeszutek Wilk
[not found] ` <0a8cb4bcad7fcf091a6bbe158323bba0@admin.gogi.tv>
2011-05-31 16:20 ` Daniel Haid
[not found] ` <20110531190412.GA21245@dumpdata.com>
2011-05-31 19:57 ` Daniel Haid
2011-06-01 13:24 ` Konrad Rzeszutek Wilk
2011-06-01 16:10 ` Daniel Haid
2011-06-01 21:51 ` Andi Kleen
2011-06-01 21:58 ` Daniel Haid
2011-06-01 22:22 ` Andi Kleen
2011-06-03 17:31 ` [PATCH] tentative fix for radeon on systems >4GB without hardware iommu Daniel Haid
2011-06-03 20:44 ` Alex Deucher
2011-06-03 23:13 ` Konrad Rzeszutek Wilk
2011-06-06 17:45 ` Daniel Haid
2011-06-06 17:41 ` Daniel Haid
2011-06-06 19:08 ` Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110523220536.GB11961@dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=d.haid@gogi.tv \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome