Hello hackers. I found a reliable way to oops the kernel - both 2.6.38.6 and 2.6.39 are affected. The setup is this: - debian unstable - configured udisks + usbmount to automount thumb drives - attached a thumbdrive with UDF filesystem on it - checked that drive was mounted - removed drive ==> OOPS The oops only happens with UDF. A vfat filesystem doesn't cause any problems. Okay, I know that UDF on flash is somewhat of a rare thing but I happen to like it. System is rather old core2duo running 32-bit system: % cat /proc/version Linux version 2.6.38.6 (bostik@odin) (gcc version 4.6.1 20110507 (prerelease) (Debian 4.6.0-7) ) #2 SMP PREEMPT Sun May 15 08:07:07 EEST 2011 Dmesg attached. This is what my .config says about USB: % zgrep USB /proc/config.gz | grep -v ^# CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBFUSB=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_CDC_NCM=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_ZAURUS=m CONFIG_SND_USB=y CONFIG_USB_HID=m CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_UHCI_HCD=m CONFIG_USB_ACM=m CONFIG_USB_STORAGE=m And this is what it says about UDF: % zgrep UDF /proc/config.gz CONFIG_UDF_FS=m CONFIG_UDF_NLS=y When mounted, the UDF filesystem produces this: /dev/sdf1 on /media/usb0 type udf (rw,noexec,nodev,noatime,nodiratime) And when it is removed, I get a series of four consecutive oops messages. The oopses are attached. - oops.txt is the original one - oops2.txt is the first reproduction on 2.6.38.6 - oops3.txt is the reproduction on 2.6.39 I have included the immediately preceding log lines from usbmount for context. Is there any other information I could provide? Output of lspci -vvv, filtered to USB controllers only: 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device 514d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-