Re: tc match MAC destination - nothing matches on protocol 802_3

[Stephen Hemminger <shemminger@vyatta.com>]

On Thu, 16 Jun 2011 10:56:52 +0300
Doru Theodor Petrescu <pdoru.kernel@evox.ro> wrote:

> 
> 
> I updated my scripts to use the 'tc filter ... match ether src/dst'
> syntax. it really makes reading the script easier. thanks for the tip!
> 
> however the problem persists. I changed the rule to match ANY pachet of
> type 802_3 and redirect it to ifb1. but nothing arrives on ifb1.
> 
> I tried to redirect ARP pachets using 'protocol arp' filter and it works
> perfectly as expected.
> 
> so at this point the problem is no longer 'how to match ethernet header'
> but rather 'how to match a pachet of type 802_3'. My feeling is that
> there is a bug somewhere in kernel where the 'protocol 802_3' matching
> happens.
> 
> 
> I attach part of the script I use to generate the filters and classes. I
> removed everything related to HTB and IP pachets because there is no
> problem there. in case the formating is lost, you can download it from
> here: http://evox.ro/kernel_netdev_tc_protocol_802.3/
> 
> 
> Thx for any help,
> Doru Theodor Petrescu
> CTO, Evox Solutions SRL
> http://evox.ro/
> 
> 
> 
> for DEV in bond0.2199 bond1.2199 bond0.3000 bond1.3001 ; do
> 
> 
>    tc qdisc  del dev $DEV root
> 
>    tc qdisc  add dev $DEV root handle 1: htb default 2
>    tc class  add dev $DEV parent 1: classid 1:1 htb rate 930000kbit ceil
> 930000kbit quantum 1600
>    
>    tc filter add dev $DEV parent 1: prio 5 protocol ip u32
> # ==> 800:
> 
>    tc filter add dev $DEV parent 1: prio 1 protocol 0x0806 u32
> # ==> 801:      protocol ARP
>    tc filter add dev $DEV parent 1: prio 1 handle 801:0:7 protocol
> 0x0806 u32  match u32 0 0 flowid 1:3
> 
>    tc filter add dev $DEV parent 1: prio 2 protocol 802_3 u32
> # ==> 802:
> 
>    tc filter add dev $DEV parent 1: prio 6 protocol ip u32
> # ==> 803:
> 
> 
>    tc filter replace dev $DEV parent 1: prio 2 handle 802:0:3  protocol
> 802_3 u32 match u16 0 0 at 0 flowid 1:3 action mirred egress mirror dev
> ifb1
>    tc filter replace dev $DEV parent 1: prio 2 handle 802:0:9  protocol
> 802_3 u32 match ether src 01:00:0c:cc:cc:cd flowid 1:3 action mirred
> egress mirror dev ifb1
>    tc filter replace dev $DEV parent 1: prio 2 handle 802:0:10 protocol
> 802_3 u32 match ether dst 01:00:0c:cc:cc:cd flowid 1:3 action mirred
> egress mirror dev ifb1
> 
> done
> 
> 
> # the 802_3 pachet filter:   
> # 
> # 802:0:3 should match ANY pachet of type 802_3 and mirror it to ifb1
> # 802:0:9 and 802:0:10 should match any pachet with src/dst
> 01:00:0c:cc:cc:cd and mirror it to ifb1
> #
> # however NOTHING is going to ifb1    try 'tcpdump -nltve -i ifb1'
> # at the same time 'tcpdump -nltve -i bond1.2199 ether host
> 0100.0ccc.cccd' will show about one pachet every second
> # 
> 
> 
> # at the same time the ARP filter works. you can mirror all ARP trafic
> to IFB1 like this:
> # tc filter replace dev $DEV parent 1: prio 1 handle 801:0:7 protocol
> 0x0806 u32  match u32 0 0 flowid 1:3 action mirred egress mirror dev
> ifb1

I think you want 802_2 to match STP frames. 802_3 is a dummy value
for the old Novell IPX encapsulation