From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753028Ab1G3F2a (ORCPT ); Sat, 30 Jul 2011 01:28:30 -0400 Received: from isilmar-3.linta.de ([188.40.101.200]:57325 "EHLO linta.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751978Ab1G3F22 (ORCPT ); Sat, 30 Jul 2011 01:28:28 -0400 Date: Sat, 30 Jul 2011 07:28:26 +0200 From: Dominik Brodowski To: Larry Finger Cc: "linux-pcmcia@lists.infradead.org" , LKML Subject: Re: Problem with ide-cs Message-ID: <20110730052826.GB12383@isilmar-3.linta.de> Mail-Followup-To: Larry Finger , "linux-pcmcia@lists.infradead.org" , LKML References: <4E33851C.2000806@lwfinger.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <4E33851C.2000806@lwfinger.net> User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Larry, On Fri, Jul 29, 2011 at 11:14:20PM -0500, Larry Finger wrote: > With kernel 3.0, my external hard drive attached to a PCMCIA card reports > "irq 11: nobody cared (try booting with the "irqpoll" option)". The > driver in question is ide-cs. When I try irqpoll, the device works > correctly. Naturally, the interrupt is shared with yenta, the PCMCIA > adapter driver. In addition, that same interrupt is used by a BCM4318 > Cardbus device. > > I plan on preparing a Bugzilla entry for this problem, but I'm not quite > ready. What I would like to know if there is any documentation on what > kinds of changes are needed to fix the problem. Let me guess: it worked fine in 2.6.39, or .38? Output of "lspci -vv", "dmesg" for a working and a non-working kernel would be good starting points for trying to debug this issue. Best, Dominik