From: Josh Boyer <jwboyer@redhat.com>
To: Oliver Neukum <oliver@neukum.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: cdc_ncm uses stack memory for DMA
Date: Tue, 2 Aug 2011 07:01:38 -0400 [thread overview]
Message-ID: <20110802110138.GD2096@zod.bos.redhat.com> (raw)
In-Reply-To: <201108012226.16180.oliver@neukum.org>
On Mon, Aug 01, 2011 at 10:26:16PM +0200, Oliver Neukum wrote:
> Am Montag, 1. August 2011, 21:59:50 schrieb Josh Boyer:
>
> Hi,
>
> > Looking through the code, it seems that cdc_ncm_setup is still passing
> > stack variables around lines 270, 276, 375, and 406. Which of those
> > exactly is triggering the backtrace, I'm not sure but all of them seem
> > incorrect from what I can tell.
>
> They are incorrect.
>
> > Do you have any thoughts on a solution for this? Off the top of my
> > head, either the local variables being used could be added to the ctx
>
> Careful. You also need to confirm to the rules about cached coherency
> on some architectures. You cannot do DMA into the middle of a structure
> unless you are sure it is not touched any other way.
>
> > structure or the variables can be changed to pointers and then be
> > allocated via kmalloc and torn down shortly after.
>
> This looks like the easiest way.
OK. How does the following look? It's been compile tested, but I don't
have the hardware.
josh
commit 208ae00b437bec1f46fa93f37c65a66a831e55fb
Author: Josh Boyer <jwboyer@redhat.com>
Date: Mon Aug 1 21:09:43 2011 -0400
The cdc_ncm driver still has a few places where stack variables are passed
to the cdc_ncm_do_request function. This triggers a stack trace in
lib/dma-debug.c if the CONFIG_DEBUG_DMA_API option is set.
Adjust these calls to pass parameters that have been allocated with kzalloc.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index fd622a6..7415265 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -260,23 +260,38 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
req.wIndex = cpu_to_le16(iface_no);
if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) {
- struct usb_cdc_ncm_ndp_input_size ndp_in_sz;
+ struct usb_cdc_ncm_ndp_input_size *ndp_in_sz;
+
+ ndp_in_sz = kzalloc(sizeof(*ndp_in_sz), GFP_KERNEL);
+ if (!ndp_in_sz) {
+ err = -ENOMEM;
+ goto size_err;
+ }
req.wLength = 8;
- ndp_in_sz.dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
- ndp_in_sz.wNtbInMaxDatagrams =
+ ndp_in_sz->dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+ ndp_in_sz->wNtbInMaxDatagrams =
cpu_to_le16(CDC_NCM_DPT_DATAGRAMS_MAX);
- ndp_in_sz.wReserved = 0;
- err = cdc_ncm_do_request(ctx, &req, &ndp_in_sz, 0, NULL,
+ ndp_in_sz->wReserved = 0;
+ err = cdc_ncm_do_request(ctx, &req, ndp_in_sz, 0, NULL,
1000);
+ kfree(ndp_in_sz);
} else {
- __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+ __le32 *dwNtbInMaxSize;
+ dwNtbInMaxSize = kzalloc(sizeof(*dwNtbInMaxSize), GFP_KERNEL);
+ if (!dwNtbInMaxSize) {
+ err = -ENOMEM;
+ goto size_err;
+ }
+ *dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
req.wLength = 4;
- err = cdc_ncm_do_request(ctx, &req, &dwNtbInMaxSize, 0,
+ err = cdc_ncm_do_request(ctx, &req, dwNtbInMaxSize, 0,
NULL, 1000);
+ kfree(dwNtbInMaxSize);
}
+size_err:
if (err)
pr_debug("Setting NTB Input Size failed\n");
}
@@ -362,9 +377,15 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
/* set Max Datagram Size (MTU) */
if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) {
- __le16 max_datagram_size;
+ __le16 *max_datagram_size;
u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
+ max_datagram_size = kzalloc(sizeof(*max_datagram_size), GFP_KERNEL);
+ if (!max_datagram_size) {
+ err = -ENOMEM;
+ goto max_dgram_err;
+ }
+
req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN |
USB_RECIP_INTERFACE;
req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE;
@@ -372,13 +393,14 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
req.wIndex = cpu_to_le16(iface_no);
req.wLength = cpu_to_le16(2);
- err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL,
+ err = cdc_ncm_do_request(ctx, &req, max_datagram_size, 0, NULL,
1000);
+
if (err) {
pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n",
CDC_NCM_MIN_DATAGRAM_SIZE);
} else {
- ctx->max_datagram_size = le16_to_cpu(max_datagram_size);
+ ctx->max_datagram_size = le16_to_cpu(*max_datagram_size);
/* Check Eth descriptor value */
if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) {
if (ctx->max_datagram_size > eth_max_sz)
@@ -401,10 +423,12 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
req.wValue = 0;
req.wIndex = cpu_to_le16(iface_no);
req.wLength = 2;
- max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
+ *max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
- err = cdc_ncm_do_request(ctx, &req, &max_datagram_size,
+ err = cdc_ncm_do_request(ctx, &req, max_datagram_size,
0, NULL, 1000);
+ kfree(max_datagram_size);
+max_dgram_err:
if (err)
pr_debug("SET_MAX_DATAGRAM_SIZE failed\n");
}
next prev parent reply other threads:[~2011-08-02 11:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-01 19:59 Josh Boyer
2011-08-01 20:26 ` Oliver Neukum
2011-08-02 11:01 ` Josh Boyer [this message]
2011-08-02 12:00 ` Alexey ORISHKO
2011-08-02 12:08 ` Josh Boyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110802110138.GD2096@zod.bos.redhat.com \
--to=jwboyer@redhat.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=oliver@neukum.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®