From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Stephen Hemminger <shemminger@vyatta.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [13/50] bridge: send proper message_age in config BPDU
Date: Fri, 05 Aug 2011 17:03:31 -0700 [thread overview]
Message-ID: <20110806000412.847636558@clark.kroah.org> (raw)
In-Reply-To: <20110806000419.GA28392@kroah.com>
2.6.33-longterm review patch. If anyone has any objections, please let us know.
------------------
From: stephen hemminger <shemminger@vyatta.com>
commit 0c03150e7ea8f7fcd03cfef29385e0010b22ee92 upstream.
A bridge topology with three systems:
+------+ +------+
| A(2) |--| B(1) |
+------+ +------+
\ /
+------+
| C(3) |
+------+
What is supposed to happen:
* bridge with the lowest ID is elected root (for example: B)
* C detects that A->C is higher cost path and puts in blocking state
What happens. Bridge with lowest id (B) is elected correctly as
root and things start out fine initially. But then config BPDU
doesn't get transmitted from A -> C. Because of that
the link from A-C is transistioned to the forwarding state.
The root cause of this is that the configuration messages
is generated with bogus message age, and dropped before
sending.
In the standardmessage_age is supposed to be:
the time since the generation of the Configuration BPDU by
the Root that instigated the generation of this Configuration BPDU.
Reimplement this by recording the timestamp (age + jiffies) when
recording config information. The old code incorrectly used the time
elapsed on the ageing timer which was incorrect.
See also:
https://bugzilla.vyatta.com/show_bug.cgi?id=7164
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
net/bridge/br_private.h | 1 +
net/bridge/br_stp.c | 4 ++--
2 files changed, 3 insertions(+), 2 deletions(-)
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -75,6 +75,7 @@ struct net_bridge_port
bridge_id designated_bridge;
u32 path_cost;
u32 designated_cost;
+ unsigned long designated_age;
struct timer_list forward_delay_timer;
struct timer_list hold_timer;
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -165,8 +165,7 @@ void br_transmit_config(struct net_bridg
else {
struct net_bridge_port *root
= br_get_port(br, br->root_port);
- bpdu.message_age = br->max_age
- - (root->message_age_timer.expires - jiffies)
+ bpdu.message_age = (jiffies - root->designated_age)
+ MESSAGE_AGE_INCR;
}
bpdu.max_age = br->max_age;
@@ -190,6 +189,7 @@ static inline void br_record_config_info
p->designated_cost = bpdu->root_path_cost;
p->designated_bridge = bpdu->bridge_id;
p->designated_port = bpdu->port_id;
+ p->designated_age = jiffies + bpdu->message_age;
mod_timer(&p->message_age_timer, jiffies
+ (p->br->max_age - bpdu->message_age));
next prev parent reply other threads:[~2011-08-06 0:10 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-06 0:04 [00/50] 2.6.33.17-longterm review Greg KH
2011-08-06 0:03 ` [01/50] ASoC: Fix Blackfin I2S _pointer() implementation return in bounds values Greg KH
2011-08-06 0:03 ` [02/50] [media] v4l2-ioctl.c: prefill tuner type for g_frequency and g/s_tuner Greg KH
2011-08-06 0:03 ` [03/50] [media] pvrusb2: fix g/s_tuner support Greg KH
2011-08-06 0:03 ` [04/50] [media] bttv: fix s_tuner for radio Greg KH
2011-08-06 0:03 ` [05/50] SUNRPC: Fix a race between work-queue and rpc_killall_tasks Greg KH
2011-08-06 0:03 ` [06/50] SUNRPC: Fix use of static variable in rpcb_getport_async Greg KH
2011-08-06 0:03 ` [07/50] si4713-i2c: avoid potential buffer overflow on si4713 Greg KH
2011-08-06 0:03 ` [08/50] hwmon: (asus_atk0110) Fix memory leak Greg KH
2011-08-06 0:03 ` [09/50] hwmon: (max1111) Fix race condition causing NULL pointer exception Greg KH
2011-08-06 0:03 ` [10/50] USB: pl2303: add AdLink ND-6530 USB IDs Greg KH
2011-08-06 0:03 ` [11/50] USB: pl2303.h: checkpatch cleanups Greg KH
2011-08-06 0:03 ` [12/50] USB: serial: add IDs for WinChipHead USB->RS232 adapter Greg KH
2011-08-06 0:03 ` Greg KH [this message]
2011-08-06 0:03 ` [14/50] davinci: DM365 EVM: fix video input mux bits Greg KH
2011-08-06 0:03 ` [15/50] libata: fix unexpectedly frozen port after ata_eh_reset() Greg KH
2011-08-06 0:03 ` [16/50] x86: Make Dell Latitude E5420 use reboot=pci Greg KH
2011-08-06 0:03 ` [17/50] gro: Only reset frag0 when skb can be pulled Greg KH
2011-08-06 0:03 ` [18/50] staging: comedi: fix infoleak to userspace Greg KH
2011-08-06 0:03 ` [19/50] usb: musb: restore INDEX register in resume path Greg KH
2011-08-06 0:03 ` [20/50] USB: dummy-hcd needs the has_tt flag Greg KH
2011-08-06 0:03 ` [21/50] ARM: pxa/cm-x300: fix V3020 RTC functionality Greg KH
2011-08-06 0:03 ` [22/50] jme: Fix unmap error (Causing system freeze) Greg KH
2011-08-06 0:03 ` [23/50] [SCSI] libsas: remove expander from dev list on error Greg KH
2011-08-06 0:03 ` [24/50] mac80211: Restart STA timers only on associated state Greg KH
2011-08-06 0:03 ` [25/50] [SCSI] Blacklist Traxdata CDR4120 and IOMEGA Zip drive to avoid lock ups Greg KH
2011-08-06 0:03 ` [26/50] [SCSI] ses: requesting a fault indication Greg KH
2011-08-06 0:03 ` [27/50] [SCSI] fix crash in scsi_dispatch_cmd() Greg KH
2011-08-06 0:03 ` [28/50] [SCSI] pmcraid: reject negative request size Greg KH
2011-08-06 0:03 ` [29/50] kexec, x86: Fix incorrect jump back address if not Greg KH
2011-08-06 0:03 ` [30/50] powerpc/kdump: Fix timeout in crash_kexec_wait_realmode Greg KH
2011-08-06 0:03 ` [31/50] PCI: ARI is a PCIe v2 feature Greg KH
2011-08-06 0:03 ` [32/50] cciss: do not attempt to read from a write-only register Greg KH
2011-08-06 0:03 ` [33/50] geode: reflect mfgpt dependency on mfd Greg KH
2011-08-06 0:03 ` [34/50] xtensa: prevent arbitrary read in ptrace Greg KH
2011-08-06 0:03 ` [35/50] ext3: Fix oops in ext3_try_to_allocate_with_rsv() Greg KH
2011-08-06 0:03 ` [36/50] svcrpc: fix list-corrupting race on nfsd shutdown Greg KH
2011-08-06 0:03 ` [37/50] EHCI: only power off port if over-current is active Greg KH
2011-08-06 0:03 ` [38/50] EHCI: fix direction handling for interrupt data toggles Greg KH
2011-08-06 0:03 ` [39/50] powerpc/pseries/hvconsole: Fix dropped console output Greg KH
2011-08-06 0:03 ` [40/50] x86: Hpet: Avoid the comparator readback penalty Greg KH
2011-08-06 0:03 ` [41/50] x86: HPET: Chose a paranoid safe value for the ETIME check Greg KH
2011-08-06 0:04 ` [42/50] Revert "block: rescan partitions on invalidated devices on -ENOMEDIA Greg KH
2011-08-06 0:04 ` [43/50] gre: fix netns vs proto registration ordering Greg KH
2011-08-06 0:04 ` [44/50] netns xfrm: fixup xfrm6_tunnel error propagation Greg KH
2011-08-06 0:04 ` [45/50] alpha: fix several security issues Greg KH
2011-08-06 0:04 ` [46/50] proc: restrict access to /proc/PID/io Greg KH
2011-08-06 0:04 ` [47/50] ALSA: sound/core/pcm_compat.c: adjust array index Greg KH
2011-08-06 0:04 ` [48/50] dm mpath: fix potential NULL pointer in feature arg processing Greg KH
2011-08-06 0:04 ` [49/50] dm: fix idr leak on module removal Greg KH
2011-08-06 0:04 ` [50/50] drm/i915: Fix typo in DRM_I915_OVERLAY_PUT_IMAGE ioctl Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110806000412.847636558@clark.kroah.org \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=shemminger@vyatta.com \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®