From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
"David S. Miller" <davem@davemloft.net>
Subject: [30/90] net: Compute protocol sequence numbers and fragment IDs using MD5.
Date: Fri, 12 Aug 2011 14:04:15 -0700 [thread overview]
Message-ID: <20110812210554.766557745@clark.kroah.org> (raw)
In-Reply-To: <20110812210626.GA4725@kroah.com>
3.0-stable review patch. If anyone has any objections, please let us know.
------------------
From: "David S. Miller" <davem@davemloft.net>
Computers have become a lot faster since we compromised on the
partial MD4 hash which we use currently for performance reasons.
MD5 is a much safer choice, and is inline with both RFC1948 and
other ISS generators (OpenBSD, Solaris, etc.)
Furthermore, only having 24-bits of the sequence number be truly
unpredictable is a very serious limitation. So the periodic
regeneration and 8-bit counter have been removed. We compute and
use a full 32-bit sequence number.
For ipv6, DCCP was found to use a 32-bit truncated initial sequence
number (it needs 43-bits) and that is fixed here as well.
Reported-by: Dan Kaminsky <dan@doxpara.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/random.c | 334 -------------------------------
include/linux/random.h | 11 -
include/net/secure_seq.h | 20 +
net/core/Makefile | 2
net/core/secure_seq.c | 184 +++++++++++++++++
net/dccp/ipv4.c | 1
net/dccp/ipv6.c | 9
net/ipv4/inet_hashtables.c | 1
net/ipv4/inetpeer.c | 1
net/ipv4/netfilter/nf_nat_proto_common.c | 1
net/ipv4/route.c | 1
net/ipv4/tcp_ipv4.c | 1
net/ipv6/inet6_hashtables.c | 1
net/ipv6/tcp_ipv6.c | 1
14 files changed, 223 insertions(+), 345 deletions(-)
create mode 100644 include/net/secure_seq.h
create mode 100644 net/core/secure_seq.c
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1300,330 +1300,14 @@ ctl_table random_table[] = {
};
#endif /* CONFIG_SYSCTL */
-/********************************************************************
- *
- * Random functions for networking
- *
- ********************************************************************/
+static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned;
-/*
- * TCP initial sequence number picking. This uses the random number
- * generator to pick an initial secret value. This value is hashed
- * along with the TCP endpoint information to provide a unique
- * starting point for each pair of TCP endpoints. This defeats
- * attacks which rely on guessing the initial TCP sequence number.
- * This algorithm was suggested by Steve Bellovin.
- *
- * Using a very strong hash was taking an appreciable amount of the total
- * TCP connection establishment time, so this is a weaker hash,
- * compensated for by changing the secret periodically.
- */
-
-/* F, G and H are basic MD4 functions: selection, majority, parity */
-#define F(x, y, z) ((z) ^ ((x) & ((y) ^ (z))))
-#define G(x, y, z) (((x) & (y)) + (((x) ^ (y)) & (z)))
-#define H(x, y, z) ((x) ^ (y) ^ (z))
-
-/*
- * The generic round function. The application is so specific that
- * we don't bother protecting all the arguments with parens, as is generally
- * good macro practice, in favor of extra legibility.
- * Rotation is separate from addition to prevent recomputation
- */
-#define ROUND(f, a, b, c, d, x, s) \
- (a += f(b, c, d) + x, a = (a << s) | (a >> (32 - s)))
-#define K1 0
-#define K2 013240474631UL
-#define K3 015666365641UL
-
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-
-static __u32 twothirdsMD4Transform(__u32 const buf[4], __u32 const in[12])
+static int __init random_int_secret_init(void)
{
- __u32 a = buf[0], b = buf[1], c = buf[2], d = buf[3];
-
- /* Round 1 */
- ROUND(F, a, b, c, d, in[ 0] + K1, 3);
- ROUND(F, d, a, b, c, in[ 1] + K1, 7);
- ROUND(F, c, d, a, b, in[ 2] + K1, 11);
- ROUND(F, b, c, d, a, in[ 3] + K1, 19);
- ROUND(F, a, b, c, d, in[ 4] + K1, 3);
- ROUND(F, d, a, b, c, in[ 5] + K1, 7);
- ROUND(F, c, d, a, b, in[ 6] + K1, 11);
- ROUND(F, b, c, d, a, in[ 7] + K1, 19);
- ROUND(F, a, b, c, d, in[ 8] + K1, 3);
- ROUND(F, d, a, b, c, in[ 9] + K1, 7);
- ROUND(F, c, d, a, b, in[10] + K1, 11);
- ROUND(F, b, c, d, a, in[11] + K1, 19);
-
- /* Round 2 */
- ROUND(G, a, b, c, d, in[ 1] + K2, 3);
- ROUND(G, d, a, b, c, in[ 3] + K2, 5);
- ROUND(G, c, d, a, b, in[ 5] + K2, 9);
- ROUND(G, b, c, d, a, in[ 7] + K2, 13);
- ROUND(G, a, b, c, d, in[ 9] + K2, 3);
- ROUND(G, d, a, b, c, in[11] + K2, 5);
- ROUND(G, c, d, a, b, in[ 0] + K2, 9);
- ROUND(G, b, c, d, a, in[ 2] + K2, 13);
- ROUND(G, a, b, c, d, in[ 4] + K2, 3);
- ROUND(G, d, a, b, c, in[ 6] + K2, 5);
- ROUND(G, c, d, a, b, in[ 8] + K2, 9);
- ROUND(G, b, c, d, a, in[10] + K2, 13);
-
- /* Round 3 */
- ROUND(H, a, b, c, d, in[ 3] + K3, 3);
- ROUND(H, d, a, b, c, in[ 7] + K3, 9);
- ROUND(H, c, d, a, b, in[11] + K3, 11);
- ROUND(H, b, c, d, a, in[ 2] + K3, 15);
- ROUND(H, a, b, c, d, in[ 6] + K3, 3);
- ROUND(H, d, a, b, c, in[10] + K3, 9);
- ROUND(H, c, d, a, b, in[ 1] + K3, 11);
- ROUND(H, b, c, d, a, in[ 5] + K3, 15);
- ROUND(H, a, b, c, d, in[ 9] + K3, 3);
- ROUND(H, d, a, b, c, in[ 0] + K3, 9);
- ROUND(H, c, d, a, b, in[ 4] + K3, 11);
- ROUND(H, b, c, d, a, in[ 8] + K3, 15);
-
- return buf[1] + b; /* "most hashed" word */
- /* Alternative: return sum of all words? */
-}
-#endif
-
-#undef ROUND
-#undef F
-#undef G
-#undef H
-#undef K1
-#undef K2
-#undef K3
-
-/* This should not be decreased so low that ISNs wrap too fast. */
-#define REKEY_INTERVAL (300 * HZ)
-/*
- * Bit layout of the tcp sequence numbers (before adding current time):
- * bit 24-31: increased after every key exchange
- * bit 0-23: hash(source,dest)
- *
- * The implementation is similar to the algorithm described
- * in the Appendix of RFC 1185, except that
- * - it uses a 1 MHz clock instead of a 250 kHz clock
- * - it performs a rekey every 5 minutes, which is equivalent
- * to a (source,dest) tulple dependent forward jump of the
- * clock by 0..2^(HASH_BITS+1)
- *
- * Thus the average ISN wraparound time is 68 minutes instead of
- * 4.55 hours.
- *
- * SMP cleanup and lock avoidance with poor man's RCU.
- * Manfred Spraul <manfred@colorfullife.com>
- *
- */
-#define COUNT_BITS 8
-#define COUNT_MASK ((1 << COUNT_BITS) - 1)
-#define HASH_BITS 24
-#define HASH_MASK ((1 << HASH_BITS) - 1)
-
-static struct keydata {
- __u32 count; /* already shifted to the final position */
- __u32 secret[12];
-} ____cacheline_aligned ip_keydata[2];
-
-static unsigned int ip_cnt;
-
-static void rekey_seq_generator(struct work_struct *work);
-
-static DECLARE_DELAYED_WORK(rekey_work, rekey_seq_generator);
-
-/*
- * Lock avoidance:
- * The ISN generation runs lockless - it's just a hash over random data.
- * State changes happen every 5 minutes when the random key is replaced.
- * Synchronization is performed by having two copies of the hash function
- * state and rekey_seq_generator always updates the inactive copy.
- * The copy is then activated by updating ip_cnt.
- * The implementation breaks down if someone blocks the thread
- * that processes SYN requests for more than 5 minutes. Should never
- * happen, and even if that happens only a not perfectly compliant
- * ISN is generated, nothing fatal.
- */
-static void rekey_seq_generator(struct work_struct *work)
-{
- struct keydata *keyptr = &ip_keydata[1 ^ (ip_cnt & 1)];
-
- get_random_bytes(keyptr->secret, sizeof(keyptr->secret));
- keyptr->count = (ip_cnt & COUNT_MASK) << HASH_BITS;
- smp_wmb();
- ip_cnt++;
- schedule_delayed_work(&rekey_work,
- round_jiffies_relative(REKEY_INTERVAL));
-}
-
-static inline struct keydata *get_keyptr(void)
-{
- struct keydata *keyptr = &ip_keydata[ip_cnt & 1];
-
- smp_rmb();
-
- return keyptr;
-}
-
-static __init int seqgen_init(void)
-{
- rekey_seq_generator(NULL);
+ get_random_bytes(random_int_secret, sizeof(random_int_secret));
return 0;
}
-late_initcall(seqgen_init);
-
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-__u32 secure_tcpv6_sequence_number(__be32 *saddr, __be32 *daddr,
- __be16 sport, __be16 dport)
-{
- __u32 seq;
- __u32 hash[12];
- struct keydata *keyptr = get_keyptr();
-
- /* The procedure is the same as for IPv4, but addresses are longer.
- * Thus we must use twothirdsMD4Transform.
- */
-
- memcpy(hash, saddr, 16);
- hash[4] = ((__force u16)sport << 16) + (__force u16)dport;
- memcpy(&hash[5], keyptr->secret, sizeof(__u32) * 7);
-
- seq = twothirdsMD4Transform((const __u32 *)daddr, hash) & HASH_MASK;
- seq += keyptr->count;
-
- seq += ktime_to_ns(ktime_get_real());
-
- return seq;
-}
-EXPORT_SYMBOL(secure_tcpv6_sequence_number);
-#endif
-
-/* The code below is shamelessly stolen from secure_tcp_sequence_number().
- * All blames to Andrey V. Savochkin <saw@msu.ru>.
- */
-__u32 secure_ip_id(__be32 daddr)
-{
- struct keydata *keyptr;
- __u32 hash[4];
-
- keyptr = get_keyptr();
-
- /*
- * Pick a unique starting offset for each IP destination.
- * The dest ip address is placed in the starting vector,
- * which is then hashed with random data.
- */
- hash[0] = (__force __u32)daddr;
- hash[1] = keyptr->secret[9];
- hash[2] = keyptr->secret[10];
- hash[3] = keyptr->secret[11];
-
- return half_md4_transform(hash, keyptr->secret);
-}
-
-#ifdef CONFIG_INET
-
-__u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport)
-{
- __u32 seq;
- __u32 hash[4];
- struct keydata *keyptr = get_keyptr();
-
- /*
- * Pick a unique starting offset for each TCP connection endpoints
- * (saddr, daddr, sport, dport).
- * Note that the words are placed into the starting vector, which is
- * then mixed with a partial MD4 over random data.
- */
- hash[0] = (__force u32)saddr;
- hash[1] = (__force u32)daddr;
- hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
- hash[3] = keyptr->secret[11];
-
- seq = half_md4_transform(hash, keyptr->secret) & HASH_MASK;
- seq += keyptr->count;
- /*
- * As close as possible to RFC 793, which
- * suggests using a 250 kHz clock.
- * Further reading shows this assumes 2 Mb/s networks.
- * For 10 Mb/s Ethernet, a 1 MHz clock is appropriate.
- * For 10 Gb/s Ethernet, a 1 GHz clock should be ok, but
- * we also need to limit the resolution so that the u32 seq
- * overlaps less than one time per MSL (2 minutes).
- * Choosing a clock of 64 ns period is OK. (period of 274 s)
- */
- seq += ktime_to_ns(ktime_get_real()) >> 6;
-
- return seq;
-}
-
-/* Generate secure starting point for ephemeral IPV4 transport port search */
-u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
-{
- struct keydata *keyptr = get_keyptr();
- u32 hash[4];
-
- /*
- * Pick a unique starting offset for each ephemeral port search
- * (saddr, daddr, dport) and 48bits of random data.
- */
- hash[0] = (__force u32)saddr;
- hash[1] = (__force u32)daddr;
- hash[2] = (__force u32)dport ^ keyptr->secret[10];
- hash[3] = keyptr->secret[11];
-
- return half_md4_transform(hash, keyptr->secret);
-}
-EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
-
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
- __be16 dport)
-{
- struct keydata *keyptr = get_keyptr();
- u32 hash[12];
-
- memcpy(hash, saddr, 16);
- hash[4] = (__force u32)dport;
- memcpy(&hash[5], keyptr->secret, sizeof(__u32) * 7);
-
- return twothirdsMD4Transform((const __u32 *)daddr, hash);
-}
-#endif
-
-#if defined(CONFIG_IP_DCCP) || defined(CONFIG_IP_DCCP_MODULE)
-/* Similar to secure_tcp_sequence_number but generate a 48 bit value
- * bit's 32-47 increase every key exchange
- * 0-31 hash(source, dest)
- */
-u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport)
-{
- u64 seq;
- __u32 hash[4];
- struct keydata *keyptr = get_keyptr();
-
- hash[0] = (__force u32)saddr;
- hash[1] = (__force u32)daddr;
- hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
- hash[3] = keyptr->secret[11];
-
- seq = half_md4_transform(hash, keyptr->secret);
- seq |= ((u64)keyptr->count) << (32 - HASH_BITS);
-
- seq += ktime_to_ns(ktime_get_real());
- seq &= (1ull << 48) - 1;
-
- return seq;
-}
-EXPORT_SYMBOL(secure_dccp_sequence_number);
-#endif
-
-#endif /* CONFIG_INET */
-
+late_initcall(random_int_secret_init);
/*
* Get a random word for internal kernel use only. Similar to urandom but
@@ -1631,17 +1315,15 @@ EXPORT_SYMBOL(secure_dccp_sequence_numbe
* value is not cryptographically secure but for several uses the cost of
* depleting entropy is too high
*/
-DEFINE_PER_CPU(__u32 [4], get_random_int_hash);
+DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash);
unsigned int get_random_int(void)
{
- struct keydata *keyptr;
__u32 *hash = get_cpu_var(get_random_int_hash);
- int ret;
+ unsigned int ret;
- keyptr = get_keyptr();
hash[0] += current->pid + jiffies + get_cycles();
-
- ret = half_md4_transform(hash, keyptr->secret);
+ md5_transform(hash, random_int_secret);
+ ret = hash[0];
put_cpu_var(get_random_int_hash);
return ret;
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -57,17 +57,6 @@ extern void add_interrupt_randomness(int
extern void get_random_bytes(void *buf, int nbytes);
void generate_random_uuid(unsigned char uuid_out[16]);
-extern __u32 secure_ip_id(__be32 daddr);
-extern u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
-extern u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
- __be16 dport);
-extern __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport);
-extern __u32 secure_tcpv6_sequence_number(__be32 *saddr, __be32 *daddr,
- __be16 sport, __be16 dport);
-extern u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
- __be16 sport, __be16 dport);
-
#ifndef MODULE
extern const struct file_operations random_fops, urandom_fops;
#endif
--- /dev/null
+++ b/include/net/secure_seq.h
@@ -0,0 +1,20 @@
+#ifndef _NET_SECURE_SEQ
+#define _NET_SECURE_SEQ
+
+#include <linux/types.h>
+
+extern __u32 secure_ip_id(__be32 daddr);
+extern __u32 secure_ipv6_id(const __be32 daddr[4]);
+extern u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+extern u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+ __be16 dport);
+extern __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
+ __be16 sport, __be16 dport);
+extern __u32 secure_tcpv6_sequence_number(__be32 *saddr, __be32 *daddr,
+ __be16 sport, __be16 dport);
+extern u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
+ __be16 sport, __be16 dport);
+extern u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
+ __be16 sport, __be16 dport);
+
+#endif /* _NET_SECURE_SEQ */
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -3,7 +3,7 @@
#
obj-y := sock.o request_sock.o skbuff.o iovec.o datagram.o stream.o scm.o \
- gen_stats.o gen_estimator.o net_namespace.o
+ gen_stats.o gen_estimator.o net_namespace.o secure_seq.o
obj-$(CONFIG_SYSCTL) += sysctl_net_core.o
--- /dev/null
+++ b/net/core/secure_seq.c
@@ -0,0 +1,184 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cryptohash.h>
+#include <linux/module.h>
+#include <linux/cache.h>
+#include <linux/random.h>
+#include <linux/hrtimer.h>
+#include <linux/ktime.h>
+#include <linux/string.h>
+
+#include <net/secure_seq.h>
+
+static u32 net_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned;
+
+static int __init net_secret_init(void)
+{
+ get_random_bytes(net_secret, sizeof(net_secret));
+ return 0;
+}
+late_initcall(net_secret_init);
+
+static u32 seq_scale(u32 seq)
+{
+ /*
+ * As close as possible to RFC 793, which
+ * suggests using a 250 kHz clock.
+ * Further reading shows this assumes 2 Mb/s networks.
+ * For 10 Mb/s Ethernet, a 1 MHz clock is appropriate.
+ * For 10 Gb/s Ethernet, a 1 GHz clock should be ok, but
+ * we also need to limit the resolution so that the u32 seq
+ * overlaps less than one time per MSL (2 minutes).
+ * Choosing a clock of 64 ns period is OK. (period of 274 s)
+ */
+ return seq + (ktime_to_ns(ktime_get_real()) >> 6);
+}
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+__u32 secure_tcpv6_sequence_number(__be32 *saddr, __be32 *daddr,
+ __be16 sport, __be16 dport)
+{
+ u32 secret[MD5_MESSAGE_BYTES / 4];
+ u32 hash[MD5_DIGEST_WORDS];
+ u32 i;
+
+ memcpy(hash, saddr, 16);
+ for (i = 0; i < 4; i++)
+ secret[i] = net_secret[i] + daddr[i];
+ secret[4] = net_secret[4] +
+ (((__force u16)sport << 16) + (__force u16)dport);
+ for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+ secret[i] = net_secret[i];
+
+ md5_transform(hash, secret);
+
+ return seq_scale(hash[0]);
+}
+EXPORT_SYMBOL(secure_tcpv6_sequence_number);
+
+u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+ __be16 dport)
+{
+ u32 secret[MD5_MESSAGE_BYTES / 4];
+ u32 hash[MD5_DIGEST_WORDS];
+ u32 i;
+
+ memcpy(hash, saddr, 16);
+ for (i = 0; i < 4; i++)
+ secret[i] = net_secret[i] + (__force u32) daddr[i];
+ secret[4] = net_secret[4] + (__force u32)dport;
+ for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+ secret[i] = net_secret[i];
+
+ md5_transform(hash, secret);
+
+ return hash[0];
+}
+#endif
+
+#ifdef CONFIG_INET
+__u32 secure_ip_id(__be32 daddr)
+{
+ u32 hash[MD5_DIGEST_WORDS];
+
+ hash[0] = (__force __u32) daddr;
+ hash[1] = net_secret[13];
+ hash[2] = net_secret[14];
+ hash[3] = net_secret[15];
+
+ md5_transform(hash, net_secret);
+
+ return hash[0];
+}
+
+__u32 secure_ipv6_id(const __be32 daddr[4])
+{
+ __u32 hash[4];
+
+ memcpy(hash, daddr, 16);
+ md5_transform(hash, net_secret);
+
+ return hash[0];
+}
+
+__u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr,
+ __be16 sport, __be16 dport)
+{
+ u32 hash[MD5_DIGEST_WORDS];
+
+ hash[0] = (__force u32)saddr;
+ hash[1] = (__force u32)daddr;
+ hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
+ hash[3] = net_secret[15];
+
+ md5_transform(hash, net_secret);
+
+ return seq_scale(hash[0]);
+}
+
+u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
+{
+ u32 hash[MD5_DIGEST_WORDS];
+
+ hash[0] = (__force u32)saddr;
+ hash[1] = (__force u32)daddr;
+ hash[2] = (__force u32)dport ^ net_secret[14];
+ hash[3] = net_secret[15];
+
+ md5_transform(hash, net_secret);
+
+ return hash[0];
+}
+EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
+#endif
+
+#if defined(CONFIG_IP_DCCP) || defined(CONFIG_IP_DCCP_MODULE)
+u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr,
+ __be16 sport, __be16 dport)
+{
+ u32 hash[MD5_DIGEST_WORDS];
+ u64 seq;
+
+ hash[0] = (__force u32)saddr;
+ hash[1] = (__force u32)daddr;
+ hash[2] = ((__force u16)sport << 16) + (__force u16)dport;
+ hash[3] = net_secret[15];
+
+ md5_transform(hash, net_secret);
+
+ seq = hash[0] | (((u64)hash[1]) << 32);
+ seq += ktime_to_ns(ktime_get_real());
+ seq &= (1ull << 48) - 1;
+
+ return seq;
+}
+EXPORT_SYMBOL(secure_dccp_sequence_number);
+
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+u64 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
+ __be16 sport, __be16 dport)
+{
+ u32 secret[MD5_MESSAGE_BYTES / 4];
+ u32 hash[MD5_DIGEST_WORDS];
+ u64 seq;
+ u32 i;
+
+ memcpy(hash, saddr, 16);
+ for (i = 0; i < 4; i++)
+ secret[i] = net_secret[i] + daddr[i];
+ secret[4] = net_secret[4] +
+ (((__force u16)sport << 16) + (__force u16)dport);
+ for (i = 5; i < MD5_MESSAGE_BYTES / 4; i++)
+ secret[i] = net_secret[i];
+
+ md5_transform(hash, secret);
+
+ seq = hash[0] | (((u64)hash[1]) << 32);
+ seq += ktime_to_ns(ktime_get_real());
+ seq &= (1ull << 48) - 1;
+
+ return seq;
+}
+EXPORT_SYMBOL(secure_dccpv6_sequence_number);
+#endif
+#endif
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -26,6 +26,7 @@
#include <net/timewait_sock.h>
#include <net/tcp_states.h>
#include <net/xfrm.h>
+#include <net/secure_seq.h>
#include "ackvec.h"
#include "ccid.h"
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -29,6 +29,7 @@
#include <net/transp_v6.h>
#include <net/ip6_checksum.h>
#include <net/xfrm.h>
+#include <net/secure_seq.h>
#include "dccp.h"
#include "ipv6.h"
@@ -69,13 +70,7 @@ static inline void dccp_v6_send_check(st
dh->dccph_checksum = dccp_v6_csum_finish(skb, &np->saddr, &np->daddr);
}
-static inline __u32 secure_dccpv6_sequence_number(__be32 *saddr, __be32 *daddr,
- __be16 sport, __be16 dport )
-{
- return secure_tcpv6_sequence_number(saddr, daddr, sport, dport);
-}
-
-static inline __u32 dccp_v6_init_sequence(struct sk_buff *skb)
+static inline __u64 dccp_v6_init_sequence(struct sk_buff *skb)
{
return secure_dccpv6_sequence_number(ipv6_hdr(skb)->daddr.s6_addr32,
ipv6_hdr(skb)->saddr.s6_addr32,
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -21,6 +21,7 @@
#include <net/inet_connection_sock.h>
#include <net/inet_hashtables.h>
+#include <net/secure_seq.h>
#include <net/ip.h>
/*
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -19,6 +19,7 @@
#include <linux/net.h>
#include <net/ip.h>
#include <net/inetpeer.h>
+#include <net/secure_seq.h>
/*
* Theory of operations.
--- a/net/ipv4/netfilter/nf_nat_proto_common.c
+++ b/net/ipv4/netfilter/nf_nat_proto_common.c
@@ -12,6 +12,7 @@
#include <linux/ip.h>
#include <linux/netfilter.h>
+#include <net/secure_seq.h>
#include <net/netfilter/nf_nat.h>
#include <net/netfilter/nf_nat_core.h>
#include <net/netfilter/nf_nat_rule.h>
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -108,6 +108,7 @@
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#endif
+#include <net/secure_seq.h>
#define RT_FL_TOS(oldflp4) \
((u32)(oldflp4->flowi4_tos & (IPTOS_RT_MASK | RTO_ONLINK)))
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -72,6 +72,7 @@
#include <net/timewait_sock.h>
#include <net/xfrm.h>
#include <net/netdma.h>
+#include <net/secure_seq.h>
#include <linux/inet.h>
#include <linux/ipv6.h>
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -20,6 +20,7 @@
#include <net/inet_connection_sock.h>
#include <net/inet_hashtables.h>
#include <net/inet6_hashtables.h>
+#include <net/secure_seq.h>
#include <net/ip.h>
int __inet6_hash(struct sock *sk, struct inet_timewait_sock *tw)
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -61,6 +61,7 @@
#include <net/timewait_sock.h>
#include <net/netdma.h>
#include <net/inet_common.h>
+#include <net/secure_seq.h>
#include <asm/uaccess.h>
next prev parent reply other threads:[~2011-08-14 16:07 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-12 21:06 [00/90] 3.0.2-stable review Greg KH
2011-08-12 21:03 ` [01/90] cris: fix a build error in kernel/fork.c Greg KH
2011-08-12 21:03 ` [02/90] cris: fix a build error in sync_serial_open() Greg KH
2011-08-12 21:03 ` [03/90] cris: fix the prototype of sync_serial_ioctl() Greg KH
2011-08-12 21:03 ` [04/90] cris: add missing declaration of kgdb_init() and breakpoint() Greg KH
2011-08-12 21:03 ` [05/90] futex: Fix regression with read only mappings Greg KH
2011-08-12 21:03 ` [06/90] [PARISC] wire up sendmmsg syscall Greg KH
2011-08-12 21:03 ` [07/90] [PARISC] Fix futex support Greg KH
2011-08-12 21:03 ` [08/90] [PARISC] fix return type of __atomic64_add_return Greg KH
2011-08-12 21:03 ` [09/90] rt2x00: rt2800: fix zeroing skb structure Greg KH
2011-08-12 21:03 ` [10/90] rt2x00: fix usage of NULL queue Greg KH
2011-08-12 21:03 ` [11/90] rtlwifi: Fix kernel oops on ARM SOC Greg KH
2011-08-12 21:03 ` [12/90] iwlegacy: set tx power after rxon_assoc Greg KH
2011-08-12 21:03 ` [13/90] ath9k: initialize tx chainmask before testing channel tx power values Greg KH
2011-08-12 21:03 ` [14/90] ath9k: skip ->config_pci_powersave() if PCIe port has ASPM disabled Greg KH
2011-08-12 21:04 ` [15/90] net: sendmmsg should only return an error if no messages were sent Greg KH
2011-08-12 21:04 ` [16/90] net: Cap number of elements for sendmmsg Greg KH
2011-08-12 21:04 ` [17/90] net: Fix security_socket_sendmsg() bypass problem Greg KH
2011-08-12 21:04 ` [18/90] xen: allow enable use of VGA console on dom0 Greg KH
2011-08-12 21:04 ` [19/90] drm: Separate EDID Header Check from EDID Block Check Greg KH
2011-08-12 21:04 ` [20/90] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines (here: Asus M2A-VM HDMI) Greg KH
2011-08-12 21:04 ` [21/90] drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D Connector Greg KH
2011-08-12 21:04 ` [22/90] drm/radeon: Log Subsystem Vendor and Device Information Greg KH
2011-08-12 21:04 ` [23/90] drm/i915/pch: Fix integer math bugs in panel fitting Greg KH
2011-08-12 21:04 ` [24/90] drm/i915: load the LUT before pipe enable on ILK+ Greg KH
2011-08-12 21:04 ` [25/90] drm/i915: Fix typo in DRM_I915_OVERLAY_PUT_IMAGE ioctl define Greg KH
2011-08-12 21:04 ` [26/90] drm/i915: Initialize RCS ring status page address in intel_render_ring_init_dri Greg KH
2011-08-12 21:04 ` [27/90] drm/i915: Hold mode_config->mutex during hotplug processing Greg KH
2011-08-12 21:04 ` [28/90] drm/i915: Fixup for Hold mode_config->mutex during hotplug Greg KH
2011-08-12 21:04 ` [29/90] crypto: Move md5_transform to lib/md5.c Greg KH
2011-08-12 21:04 ` Greg KH [this message]
2011-08-12 21:04 ` [31/90] asus-wmi: fix hwmon/pwm1 Greg KH
2011-08-12 21:04 ` [32/90] asus-wmi: return proper value in store_cpufv() Greg KH
2011-08-12 21:04 ` [33/90] CIFS: Fix missing a decrement of inFlight value Greg KH
2011-08-12 21:04 ` [34/90] cifs: cope with negative dentries in cifs_get_root Greg KH
2011-08-12 21:04 ` [35/90] cifs: convert prefixpath delimiters in Greg KH
2011-08-12 21:04 ` [36/90] ASoC: sgtl5000: fix cache handling Greg KH
2011-08-12 21:04 ` [37/90] ALSA: timer - Fix Oops at closing slave timer Greg KH
2011-08-12 21:04 ` [38/90] ALSA: snd-usb-caiaq: Fix keymap for RigKontrol3 Greg KH
2011-08-12 21:04 ` [39/90] ALSA: snd-usb: avoid dividing by zero on invalid input Greg KH
2011-08-12 21:04 ` [40/90] ALSA: snd-usb: operate on given mixer interface only Greg KH
2011-08-12 21:04 ` [41/90] ALSA: snd-usb: Accept UAC2 FORMAT_TYPE descriptors with Greg KH
2011-08-12 21:04 ` [42/90] ipv6: make fragment identifications less predictable Greg KH
2011-08-12 21:04 ` [43/90] icmp: Fix regression in nexthop resolution during replies Greg KH
2011-08-12 21:04 ` [44/90] ipv4: Constrain UFO fragment sizes to multiples of 8 bytes Greg KH
2011-08-12 21:04 ` [45/90] ipv4: fix the reusing of routing cache entries Greg KH
2011-08-12 21:04 ` [46/90] IPVS: Free resources on module removal Greg KH
2011-08-12 21:04 ` [47/90] net: adjust array index Greg KH
2011-08-12 21:04 ` [48/90] drivers/net/niu.c: " Greg KH
2011-08-12 21:04 ` [49/90] sch_sfq: fix sfq_enqueue() Greg KH
2011-08-12 21:04 ` [50/90] IPv4: Send gratuitous ARP for secondary IP addresses also Greg KH
2011-08-12 21:04 ` [51/90] net: add IFF_SKB_TX_SHARED flag to priv_flags Greg KH
2011-08-12 21:04 ` [52/90] net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared Greg KH
2011-08-12 21:04 ` [53/90] bonding: fix string comparison errors Greg KH
2011-08-12 21:04 ` [54/90] Fix cdc-phonet build Greg KH
2011-08-12 21:04 ` [55/90] xfrm: Fix key lengths for rfc3686(ctr(aes)) Greg KH
2011-08-12 21:04 ` [56/90] sis190: Rx filter init is needed for MAC address change Greg KH
2011-08-12 21:04 ` [57/90] r8169: Add support for D-Link 530T rev C1 (Kernel Bug 38862) Greg KH
2011-08-12 21:04 ` [58/90] net: allow netif_carrier to be called safely from IRQ Greg KH
2011-08-12 21:04 ` [59/90] ipv4: use RT_TOS after some rt_tos conversions Greg KH
2011-08-12 21:04 ` [60/90] gre: fix improper error handling Greg KH
2011-08-12 21:04 ` [61/90] iwlagn: 5000 do not support idle mode Greg KH
2011-08-12 21:04 ` [62/90] [SCSI] mpt2sas: Fixed Big Indian Issues on 32 bit PPC Greg KH
2011-08-12 21:04 ` [63/90] sparc: Dont leave sparc_pmu_type NULL on sun4v Greg KH
2011-08-12 21:04 ` [64/90] sparc: Add T3 sun4v cpu type and hypervisor group defines Greg KH
2011-08-12 21:04 ` [65/90] sparc: Dont do expensive hypervisor PCR write unless necessary Greg KH
2011-08-12 21:04 ` [66/90] sparc: Detect and handle UltraSPARC-T3 cpu types Greg KH
2011-08-12 21:04 ` [67/90] sparc: Sanitize cpu feature detection and reporting Greg KH
2011-08-12 21:04 ` [68/90] sparc: Minor tweaks to Niagara page copy/clear Greg KH
2011-08-12 21:04 ` [69/90] sparc: Use popc if possible for hweight routines Greg KH
2011-08-12 21:04 ` [70/90] sparc: Use hweight64() in popc emulation Greg KH
2011-08-12 21:04 ` [71/90] sparc: Add some missing hypervisor API groups Greg KH
2011-08-12 21:04 ` [72/90] sparc: Set reboot-cmd using reboot data hypervisor call if available Greg KH
2011-08-12 21:04 ` [73/90] sparc: Use popc when possible for ffs/__ffs/ffz Greg KH
2011-08-12 21:04 ` [74/90] sparc: Access kernel TSB using physical addressing when possible Greg KH
2011-08-12 21:05 ` [75/90] sparc: Size mondo queues more sanely Greg KH
2011-08-12 21:05 ` [76/90] sparc: Fix build with DEBUG_PAGEALLOC enabled Greg KH
2011-08-12 21:05 ` [77/90] Ecryptfs: Add mount option to check uid of device being Greg KH
2011-08-12 21:05 ` [78/90] eCryptfs: Return error when lower file pointer is NULL Greg KH
2011-08-12 21:05 ` [79/90] powerpc/pseries: Fix kexec on recent firmware versions Greg KH
2011-08-12 21:05 ` [80/90] powerpc: Fix device tree claim code Greg KH
2011-08-12 21:05 ` [81/90] powerpc: pseries: Fix kexec on machines with more than 4TB of RAM Greg KH
2011-08-12 21:05 ` [82/90] ext3: Properly count journal credits for long symlinks Greg KH
2011-08-12 21:05 ` [83/90] ext4: " Greg KH
2011-08-12 21:05 ` [84/90] e1000e: alternate MAC address does not work on device id 0x1060 Greg KH
2011-08-12 21:05 ` [85/90] gianfar: fix fiper alignment after resetting the time Greg KH
2011-08-12 21:05 ` [86/90] dp83640: increase receive time stamp buffer size Greg KH
2011-08-12 21:05 ` [87/90] ath9k_hw: Fix incorrect Tx control power in AR9003 template Greg KH
2011-08-12 21:05 ` [88/90] ath9k: fix a misprint which leads to incorrect calibration Greg KH
2011-08-12 21:05 ` [89/90] sparc: Dont do hypervisor calls on non-sun4v in DS driver Greg KH
2011-08-12 21:05 ` [90/90] mm: Fix fixup_user_fault() for MMU=n Greg KH
2011-08-14 10:31 ` [00/90] 3.0.2-stable review Jiri Slaby
2011-08-14 16:18 ` Greg KH
2011-08-15 20:56 ` Dave Jones
2011-08-16 1:24 ` Greg KH
2011-08-16 17:46 ` Arnaud Lacombe
2011-08-16 17:59 ` Greg KH
2011-08-16 18:10 ` Linus Torvalds
2011-08-16 21:11 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110812210554.766557745@clark.kroah.org \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®