From: Conny Seidel <conny.seidel@amd.com>
To: Jan Beulich <JBeulich@suse.com>
Cc: "mingo@elte.hu" <mingo@elte.hu>,
"tglx@linutronix.de" <tglx@linutronix.de>,
"hpa@zytor.com" <hpa@zytor.com>, Borislav Petkov <bp@alien8.de>,
"tj@kernel.org" <tj@kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH, v2] i386/bigsmp: eliminate false warnings regarding logical APIC ID mismatches
Date: Sun, 16 Oct 2011 23:23:30 +0200 [thread overview]
Message-ID: <20111016232330.57d7facf.conny.seidel@amd.com> (raw)
In-Reply-To: <4E835D16020000780005844C@nat28.tlf.novell.com>
[-- Attachment #1: Type: text/plain, Size: 3914 bytes --]
These warnings (generally one per CPU) are a result of initializing
x86_cpu_to_logical_apicid while apic_default is still in use, but the
check in setup_local_APIC() being done when apic_bigsmp was already
used as an override in default_setup_apic_routing():
Overriding APIC driver with bigsmp
Enabling APIC mode: Physflat. Using 5 I/O APICs
------------[ cut here ]------------
WARNING: at .../arch/x86/kernel/apic/apic.c:1239
setup_local_APIC+0x137/0x46b() Hardware name: ...
CPU0 logical APIC ID: 1 != 0
Pid: 1, comm: swapper Not tainted 3.0.1-2011-08-09-jb #2
Call Trace:
[<c1005f91>] try_stack_unwind+0x1b1/0x1f0
[<c1004cc7>] dump_trace+0x47/0x110
[<c1005b0b>] show_trace_log_lvl+0x4b/0x60
[<c1005b38>] show_trace+0x18/0x20
[<c1261435>] dump_stack+0x6d/0x72
[<c10355f7>] warn_slowpath_common+0x77/0xb0
[<c10356c3>] warn_slowpath_fmt+0x33/0x40
[<c13fda81>] setup_local_APIC+0x137/0x46b
[<c13d1733>] native_smp_prepare_cpus+0x108/0x1cd
[<c13c61ff>] kernel_init+0x37/0x12c
[<c1264826>] kernel_thread_helper+0x6/0xd
---[ end trace 4eaa2a86a8e2da22 ]---
...
CPU 1 irqstacks, hard=f1c9a000 soft=f1c9c000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9e000
Initializing CPU#1
------------[ cut here ]------------
WARNING: at .../arch/x86/kernel/apic/apic.c:1239
setup_local_APIC+0x137/0x46b() Hardware name: ...
CPU1 logical APIC ID: 2 != 8
...
Fix this (for the time being, i.e. until x86_32_early_logical_apicid()
will get removed again, as Tejun says ought to be possible) by
overriding the previously stored values at the point where the APIC
driver gets overridden.
v2: Move this and the pre-existing override logic into
arch/x86/kernel/apic/bigsmp_32.c.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-By: Conny Seidel <conny.seidel@amd.com>
Cc: stable@kernel.org (2.6.39 and onwards)
---
arch/x86/include/asm/apic.h | 2 +-
arch/x86/kernel/apic/bigsmp_32.c | 20 ++++++++++++++++----
arch/x86/kernel/apic/probe_32.c | 10 ++--------
3 files changed, 19 insertions(+), 13 deletions(-)
--- 3.1-rc8/arch/x86/include/asm/apic.h
+++
3.1-rc8-i386-bigsmp-early-lapicid-override/arch/x86/include/asm/apic.h
@@ -495,7 +495,7 @@ static inline void default_wait_for_init
return;
}
-extern struct apic *generic_bigsmp_probe(void);
+extern void generic_bigsmp_probe(void);
#ifdef CONFIG_X86_LOCAL_APIC
--- 3.1-rc8/arch/x86/kernel/apic/bigsmp_32.c
+++
3.1-rc8-i386-bigsmp-early-lapicid-override/arch/x86/kernel/apic/bigsmp_32.c
@@ -255,12 +255,24 @@ static struct apic apic_bigsmp = {
.x86_32_early_logical_apicid =
bigsmp_early_logical_apicid, };
-struct apic * __init generic_bigsmp_probe(void)
+void __init generic_bigsmp_probe(void)
{
- if (probe_bigsmp())
- return &apic_bigsmp;
+ unsigned int cpu;
- return NULL;
+ if (!probe_bigsmp())
+ return;
+
+ apic = &apic_bigsmp;
+
+ for_each_possible_cpu(cpu) {
+ if (early_per_cpu(x86_cpu_to_logical_apicid,
+ cpu) == BAD_APICID)
+ continue;
+ early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
+ bigsmp_early_logical_apicid(cpu);
+ }
+
+ pr_info("Overriding APIC driver with %s\n", apic_bigsmp.name);
}
apic_driver(apic_bigsmp);
--- 3.1-rc8/arch/x86/kernel/apic/probe_32.c
+++
3.1-rc8-i386-bigsmp-early-lapicid-override/arch/x86/kernel/apic/probe_32.c
@@ -200,14 +200,8 @@ void __init default_setup_apic_routing(v
* - we find more than 8 CPUs in acpi LAPIC listing with
xAPIC support */
- if (!cmdline_apic && apic == &apic_default) {
- struct apic *bigsmp = generic_bigsmp_probe();
- if (bigsmp) {
- apic = bigsmp;
- printk(KERN_INFO "Overriding APIC driver with
%s\n",
- apic->name);
- }
- }
+ if (!cmdline_apic && apic == &apic_default)
+ generic_bigsmp_probe();
#endif
if (apic->setup_apic_routing)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2011-10-16 21:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-28 15:44 Jan Beulich
2011-10-16 21:23 ` Conny Seidel [this message]
2011-10-18 6:40 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111016232330.57d7facf.conny.seidel@amd.com \
--to=conny.seidel@amd.com \
--cc=JBeulich@suse.com \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome