From: Borislav Petkov <bp@alien8.de>
To: Mark Langsdorf <mark.langsdorf@amd.com>
Cc: venki@google.com, linux-kernel@vger.kernel.org,
"H. Peter Anvin" <hpa@zytor.com>, Ingo Molnar <mingo@elte.hu>,
Thomas Gleixner <tglx@linutronix.de>
Subject: Re: [PATCH] x86: force HPET to immediately enable RTC wake
Date: Wed, 19 Oct 2011 23:37:27 +0200 [thread overview]
Message-ID: <20111019213727.GA29433@liondog.tnic> (raw)
In-Reply-To: <201110191226.49627.mark.langsdorf@amd.com>
CCing x86 people.
On Wed, Oct 19, 2011 at 12:26:48PM -0500, Mark Langsdorf wrote:
> When HPET is operating in RTC mode, the TN_ENABLE bit
> on timer1 controls whether the HPET or the RTC delivers
> interrupts to irq8. When the system goes into suspend,
> the RTC driver sends a signal to the HPET driver so
> that the HPET releases control of irq8, allowing the
> RTC to wake the system from suspend. The switchover
> is accomplished by a write to the HPET configuration
> registers which currently only occurs while servicing
> the HPET interrupt.
>
> On some systems, I have seen the system suspend before
> an HPET interrupt occurs, preventing the write to the
> HPET configuration register and leaving the HPET in
> control of the irq8. As the HPET is not active during
> suspend, it does not generate a wake signal and RTC
> alarms do not work.
>
> This patch forces the HPET driver to immediately transfer
> control of the irq8 channel to the RTC instead of waiting
> until the next interrupt event.
>
> Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
> Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
> ---
> arch/x86/kernel/hpet.c | 21 ++++++++++++++-------
> 1 files changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
> index 4aecc54..10b09d7 100644
> --- a/arch/x86/kernel/hpet.c
> +++ b/arch/x86/kernel/hpet.c
> @@ -1048,6 +1048,14 @@ int hpet_rtc_timer_init(void)
> }
> EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
>
> +static void hpet_disable_rtc_channel(void)
> +{
> + unsigned long cfg;
> + cfg = hpet_readl(HPET_T1_CFG);
> + cfg &= ~HPET_TN_ENABLE;
> + hpet_writel(cfg, HPET_T1_CFG);
> +}
> +
> /*
> * The functions below are called from rtc driver.
> * Return 0 if HPET is not being used.
> @@ -1059,6 +1067,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
> return 0;
>
> hpet_rtc_flags &= ~bit_mask;
> + if (unlikely(!hpet_rtc_flags))
> + hpet_disable_rtc_channel();
> +
> return 1;
> }
> EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
> @@ -1124,15 +1135,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
>
> static void hpet_rtc_timer_reinit(void)
> {
> - unsigned int cfg, delta;
> + unsigned int delta;
> int lost_ints = -1;
>
> - if (unlikely(!hpet_rtc_flags)) {
> - cfg = hpet_readl(HPET_T1_CFG);
> - cfg &= ~HPET_TN_ENABLE;
> - hpet_writel(cfg, HPET_T1_CFG);
> - return;
> - }
> + if (unlikely(!hpet_rtc_flags))
> + hpet_disable_rtc_channel();
>
> if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
> delta = hpet_default_delta;
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Regards/Gruss,
Boris.
prev parent reply other threads:[~2011-10-19 21:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-19 17:26 Mark Langsdorf
2011-10-19 21:37 ` Borislav Petkov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111019213727.GA29433@liondog.tnic \
--to=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.langsdorf@amd.com \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=venki@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®