From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Claudio Scordino <claudio@evidence.eu.com>,
Jesper Nilsson <Jesper.Nilsson@axis.com>,
Greg KH <greg@kroah.com>,
linux-kernel@vger.kernel.org,
Mikael Starvik <mikael.starvik@axis.com>,
Darron Black <darron@griffin.net>,
linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, alan@linux.intel.com
Subject: Re: [PATCH] RS485: fix inconsistencies in the meaning of some variables
Date: Tue, 8 Nov 2011 10:59:59 +0100 [thread overview]
Message-ID: <20111108095959.GB31737@game.jcrosoft.org> (raw)
In-Reply-To: <4EB8F6B9.6010008@atmel.com>
On 10:30 Tue 08 Nov , Nicolas Ferre wrote:
> On 11/04/2011 09:19 AM, Claudio Scordino :
> > Hi Alan, Hi Greg,
> >
> > it seems that the crisv10.c and the atmel_serial.c serial
> > drivers interpret the fields of the serial_rs485 structure in a different
> > way.
> >
> > In particular, it seems that crisv10.c uses SER_RS485_RTS_AFTER_SEND and
> > SER_RS485_RTS_ON_SEND for the _logic value_ of the RTS pin;
> > atmel_serial.c, instead, uses these values to know if a _delay_ must be
> > set before and after sending.
>
> It seems sensible, but, on the other hand, I fear that this is a big
> change in the user interface: If people are already relying on this for
> their application, this can be difficult to understand the change. Can't
> we imagine an smoother migration path?
>
> It seems from de6f86ce5 that 16C950 may also use rs485 mode (with
> another signal that RTS BTW)...
>
> See comments online...
>
> > This patch makes the usage of these variables consistent across all
> > drivers and fixes the Documentation as well.
> > In particular, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will
> > be used to set the logic value of the RTS pin (as in the crisv10.c
> > driver); the delay is understood by looking only at the value of
> > delay_rts_before_send and delay_rts_after_send.
> >
> > Best regards,
> >
> > Claudio
> >
> >
> > Subject: RS485: fix inconsistencies in the meaning of some variables
> > From: Claudio Scordino <claudio@evidence.eu.com>
> >
> > The crisv10.c and the atmel_serial.c serial drivers interpret the fields
> > of the serial_rs485 structure in a different way.
> > In particular, crisv10.c uses SER_RS485_RTS_AFTER_SEND and
> > SER_RS485_RTS_ON_SEND for the voltage of the RTS pin; atmel_serial.c, instead,
> > uses these values to know if a delay must be set before and after sending.
> > This patch makes the usage of these variables consistent across all drivers and
> > fixes the Documentation as well.
> >>From now on, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will be used to
> > set the voltage of the RTS pin (as in the crisv10.c driver); the delay will be
> > understood by looking only at the value of delay_rts_before_send and
> > delay_rts_after_send.
>
> Ok, but don't you think that the flags names are not so much
> self-explanatory for this new meaning?
>
> What about:
> SER_RS485_RTS_LEVEL_DURING_SEND
> SER_RS485_RTS_VALUE_DURING_SEND (maybe too vague?)
> SER_RS485_RTS_LOGICAL_VALUE_DURING_SEND (maybe too long?)
>
> Moreover, can't we just use one property for this? I mean, if RTS
> logical value is high during the sending of data, can it mean that RTS
> will be low before and after? And the other way around: if the signal is
> low during data send, will it be high before and after?
>
> Here again, changing the user interface is not a good idea, so I fear
> that it can be a show stopper.
agreed with nicolas
Best Regards,
J.
next prev parent reply other threads:[~2011-11-08 16:00 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-15 14:28 [PATCH] atmel_serial: RS485: receiving enabled when sending data Bernhard Roth
2011-08-22 21:18 ` Greg KH
2011-08-23 8:30 ` Claudio Scordino
2011-08-23 9:30 ` Russell King - ARM Linux
2011-08-23 10:06 ` Claudio Scordino
2011-08-23 10:14 ` Alan Cox
2011-08-23 10:21 ` Russell King - ARM Linux
2011-08-23 15:39 ` Greg KH
2011-08-24 7:48 ` Claudio Scordino
2011-11-04 8:19 ` [PATCH] RS485: fix inconsistencies in the meaning of some variables Claudio Scordino
2011-11-04 10:36 ` Jesper Nilsson
2011-11-08 9:30 ` Nicolas Ferre
2011-11-08 9:59 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2011-11-08 10:48 ` Claudio Scordino
2011-11-08 13:48 ` Alan Cox
2011-11-08 14:24 ` Greg KH
2011-11-09 14:51 ` Claudio Scordino
2011-11-13 21:53 ` Wolfram Sang
2011-11-14 0:37 ` Darron Black
2011-11-14 11:11 ` Nicolas Ferre
2011-11-14 12:07 ` Alan Cox
2011-11-14 8:22 ` Claudio Scordino
2011-11-14 12:18 ` Nicolas Ferre
2011-11-08 15:02 ` Nicolas Ferre
2011-11-08 15:45 ` Claudio Scordino
2011-11-08 16:34 ` Jesper Nilsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111108095959.GB31737@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=Jesper.Nilsson@axis.com \
--cc=alan@linux.intel.com \
--cc=claudio@evidence.eu.com \
--cc=darron@griffin.net \
--cc=greg@kroah.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mikael.starvik@axis.com \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®