From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757287Ab1KKLkU (ORCPT ); Fri, 11 Nov 2011 06:40:20 -0500 Received: from gimli.pitney-fabs.co.uk ([87.106.140.52]:38625 "EHLO gimli.pitney-fabs.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754285Ab1KKLkT (ORCPT ); Fri, 11 Nov 2011 06:40:19 -0500 Date: Fri, 11 Nov 2011 11:40:15 +0000 From: Andrew Walrond To: linux-kernel@vger.kernel.org Subject: Re: eth0/1 swapped places after kernel Upgrade 3.0.8 -> 3.1.0 (and udev 172 -> 174) Message-ID: <20111111114014.GA1962@andrews-imac.pitney-fabs> References: <20111102101404.GA5195@andrew-xps.home> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20111102101404.GA5195@andrew-xps.home> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Nov 02, 2011 at 10:14:04AM +0000, Andrew Walrond wrote: > Not sure if this is a udev or kernel issue, or indeed whether I > should expect these devices to have persistent naming at all > without some udev configuration of my own, but I thought I'd > report it just in case it's useful. > > Output from lspci: > > 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) > 07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) > It's worse than I thought; eth0/eth1 are randomly swapping places on boot. Is this likely to be a kernel or udev problem? Relevant kernel messages: bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:1d:09:64:ae:03 bnx2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bnx2 0000:07:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:1d:09:64:ae:05 bnx2 0000:03:00.0: irq 47 for MSI/MSI-X bnx2 0000:03:00.0: eth0: using MSI bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON bnx2 0000:07:00.0: irq 48 for MSI/MSI-X bnx2 0000:07:00.0: eth1: using MSI bnx2 0000:07:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON Please let me know if I need to redirect this elsewhere. > Andrew Walrond >