From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Wang YanQing <Udknight@gmail.com>
Subject: [19/25] USB: serial: pl2303: rm duplicate id
Date: Tue, 22 Nov 2011 16:21:09 -0800 [thread overview]
Message-ID: <20111123002208.775607941@clark.kroah.org> (raw)
In-Reply-To: <20111123002222.GA2376@kroah.com>
2.6.32-longterm review patch. If anyone has any objections, please let me know.
------------------
Content-Length: 1792
Lines: 54
From: wangyanqing <udknight@gmail.com>
commit 0c16595539b612fe948559433dda08ff96a8bdc7 upstream.
I get report from customer that his usb-serial
converter doesn't work well,it sometimes work,
but sometimes it doesn't.
The usb-serial converter's id:
vendor_id product_id
0x4348 0x5523
Then I search the usb-serial codes, and there are
two drivers announce support this device, pl2303
and ch341, commit 026dfaf1 cause it. Through many
times to test, ch341 works well with this device,
and pl2303 doesn't work quite often(it just work quite little).
ch341 works well with this device, so we doesn't
need pl2303 to support.I try to revert 026dfaf1 first,
but it failed. So I prepare this patch by hand to revert it.
Signed-off-by: Wang YanQing <Udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/pl2303.c | 1 -
drivers/usb/serial/pl2303.h | 4 ----
2 files changed, 5 deletions(-)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -101,7 +101,6 @@ static struct usb_device_id id_table []
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
- { USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ } /* Terminating entry */
};
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
#define ADLINK_VENDOR_ID 0x0b63
#define ADLINK_ND6530_PRODUCT_ID 0x6530
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID 0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID 0x5523
-
/* SMART USB Serial Adapter */
#define SMART_VENDOR_ID 0x0b8c
#define SMART_PRODUCT_ID 0x2303
next prev parent reply other threads:[~2011-11-23 0:33 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-23 0:22 [00/25] 2.6.32.49-longterm review Greg KH
2011-11-23 0:20 ` [01/25] [SCSI] st: fix race in st_scsi_execute_end Greg KH
2011-11-23 0:20 ` [02/25] [SCSI] Make scsi_free_queue() kill pending SCSI commands Greg KH
2011-11-23 0:20 ` [03/25] NFS/sunrpc: dont use a credential with extra groups Greg KH
2011-11-23 0:20 ` [04/25] netlink: validate NLA_MSECS length Greg KH
2011-11-23 0:20 ` [05/25] mtd: mtdchar: add missing initializer on raw write Greg KH
2011-11-23 0:20 ` [06/25] PM / Suspend: Off by one in pm_suspend() Greg KH
2011-11-23 0:20 ` [07/25] hfs: add sanity check for file name length Greg KH
2011-11-23 0:20 ` [08/25] kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0 Greg KH
2011-11-23 0:20 ` [09/25] ASoC: wm8940: Properly set codec->dapm.bias_level Greg KH
2011-11-23 0:21 ` [10/25] md/raid5: abort any pending parity operations when array fails Greg KH
2011-11-23 0:21 ` [11/25] [media] Remove the old V4L1 v4lgrab.c file Greg KH
2011-11-23 0:21 ` [12/25] Revert "ALSA: hda: Fix quirk for Dell Inspiron 910" Greg KH
2011-11-23 0:21 ` [13/25] drm/i915: Sanity check pread/pwrite Greg KH
2011-11-23 0:21 ` [14/25] drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow Greg KH
2011-11-23 0:21 ` [15/25] genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier Greg KH
2011-11-23 0:21 ` [16/25] mm: avoid null pointer access in vm_struct via /proc/vmallocinfo Greg KH
2011-11-23 0:21 ` [17/25] ipv6: udp: fix the wrong headroom check Greg KH
2011-11-23 0:21 ` [18/25] kbuild: Fix passing -Wno-* options to gcc 4.4+ Greg KH
2011-11-23 0:21 ` Greg KH [this message]
2011-11-23 0:21 ` [20/25] USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Greg KH
2011-11-23 0:21 ` [21/25] usb-storage: Accept 8020i-protocol commands longer than 12 bytes Greg KH
2011-11-23 0:21 ` [22/25] USB: add quirk for Logitech C600 web cam Greg KH
2011-11-23 0:21 ` [23/25] USB: quirks: adding more quirky webcams to avoid squeaky audio Greg KH
2011-11-23 0:21 ` [24/25] tty: Make tiocgicount a handler Greg KH
2011-11-23 0:21 ` [25/25] tty: icount changeover for other main devices Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111123002208.775607941@clark.kroah.org \
--to=gregkh@suse.de \
--cc=Udknight@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®