mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: torvalds@linux-foundation.org, akpm@linux-foundation.org,
	alan@lxorguk.ukuu.org.uk,
	Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>,
	Alan Cox <alan@linux.intel.com>
Subject: [20/53] pch_uart: Support new device LAPIS Semiconductor ML7831 IOH
Date: Tue, 22 Nov 2011 16:23:27 -0800	[thread overview]
Message-ID: <20111123002406.486745749@clark.kroah.org> (raw)
In-Reply-To: <20111123002419.GA8531@kroah.com>

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>

commit 8249f743f732ccbc3056428945ab1d9bd36d46bf upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/tty/serial/Kconfig    |   14 +++++++-------
 drivers/tty/serial/pch_uart.c |    8 ++++++++
 2 files changed, 15 insertions(+), 7 deletions(-)

--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1585,7 +1585,7 @@ config SERIAL_IFX6X60
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART"
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
 	depends on PCI
 	select SERIAL_CORE
 	help
@@ -1593,12 +1593,12 @@ config SERIAL_PCH_UART
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7213, ML7223 and ML7831.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 config SERIAL_MSM_SMD
 	bool "Enable tty device interface for some SMD ports"
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -256,6 +256,8 @@ enum pch_uart_num_t {
 	pch_ml7213_uart2,
 	pch_ml7223_uart0,
 	pch_ml7223_uart1,
+	pch_ml7831_uart0,
+	pch_ml7831_uart1,
 };
 
 static struct pch_uart_driver_data drv_dat[] = {
@@ -268,6 +270,8 @@ static struct pch_uart_driver_data drv_d
 	[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
 	[pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
 	[pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
+	[pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
+	[pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
 };
 
 static unsigned int default_baud = 9600;
@@ -1546,6 +1550,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_
 	 .driver_data = pch_ml7223_uart0},
 	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
 	 .driver_data = pch_ml7223_uart1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
+	 .driver_data = pch_ml7831_uart0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
+	 .driver_data = pch_ml7831_uart1},
 	{0,},
 };
 



  parent reply	other threads:[~2011-11-23  0:40 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-23  0:24 [00/53] 3.0.11-stable review Greg KH
2011-11-23  0:23 ` [01/53] genirq: Fix irqfixup, irqpoll regression Greg KH
2011-11-23  0:23 ` [02/53] [SCSI] fix WARNING: at drivers/scsi/scsi_lib.c:1704 Greg KH
2011-11-23  0:23 ` [03/53] [SCSI] hpsa: Disable ASPM Greg KH
2011-11-23  0:23 ` [04/53] [SCSI] aacraid: controller hangs if kernel uses non-default ASPM policy Greg KH
2011-11-23  0:23 ` [05/53] [media] saa7164: Add support for another HVR2200 hardware revision Greg KH
2011-11-23  0:23 ` [06/53] drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend Greg KH
2011-11-23  0:23 ` [07/53] ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ Greg KH
2011-11-23  0:23 ` [08/53] Net, libertas: Resolve memory leak in if_spi_host_to_card() Greg KH
2011-11-23  0:23 ` [09/53] rt2x00: Fix sleep-while-atomic bug in powersaving code Greg KH
2011-11-23  0:23 ` [10/53] mac80211: fix NULL dereference in radiotap code Greg KH
2011-11-23  0:23 ` [11/53] mac80211: fix bug in ieee80211_build_probe_req Greg KH
2011-11-23  0:23 ` [12/53] nl80211: fix HT capability attribute validation Greg KH
2011-11-23  0:23 ` [13/53] cfg80211: fix bug on regulatory core exit on access to last_request Greg KH
2011-11-23  0:23 ` [14/53] ip6_tunnel: copy parms.name after register_netdevice Greg KH
2011-11-23  0:23 ` [15/53] PM / driver core: disable devices runtime PM during shutdown Greg KH
2011-11-23  0:23 ` [16/53] pch_phub: Support new device LAPIS Semiconductor ML7831 IOH Greg KH
2011-11-23  0:23 ` [17/53] pch_phub: Fix MAC address writing issue for LAPIS ML7831 Greg KH
2011-11-23  0:23 ` [18/53] pch_uart: Fix hw-flow control issue Greg KH
2011-11-23  0:23 ` [19/53] pch_uart: Fix DMA resource leak issue Greg KH
2011-11-23  0:23 ` Greg KH [this message]
2011-11-23  0:23 ` [21/53] tty: hvc_dcc: Fix duplicate character inputs Greg KH
2011-11-23  0:23 ` [22/53] TTY: ldisc, allow waiting for ldisc arbitrarily long Greg KH
2011-11-23  0:23 ` [23/53] TTY: ldisc, move wait idle to caller Greg KH
2011-11-23  0:23 ` [24/53] TTY: ldisc, wait for ldisc infinitely in hangup Greg KH
2011-11-23  0:23 ` [25/53] nfs: when attempting to open a directory, fall back on normal lookup (try #5) Greg KH
2011-11-23  0:23 ` [26/53] pcie-gadget-spear: Add "platform:" prefix for platform modalias Greg KH
2011-11-23  0:23 ` [27/53] drivers/base/node.c: fix compilation error with older versions of gcc Greg KH
2011-11-23  0:23 ` [28/53] xhci: Set slot and ep0 flags for address command Greg KH
2011-11-23  0:23 ` [29/53] usb, xhci: Clear warm reset change event during init Greg KH
2011-11-23  0:23 ` [30/53] usb, xhci: fix lockdep warning on endpoint timeout Greg KH
2011-11-23  0:23 ` [31/53] USB: XHCI: resume root hubs when the controller resumes Greg KH
2011-11-23  0:23 ` [32/53] USB: option: release new PID for ZTE 3G modem Greg KH
2011-11-23  0:23 ` [33/53] USB: option: add PID of Huawei E173s " Greg KH
2011-11-23  0:23 ` [34/53] USB: serial: pl2303: rm duplicate id Greg KH
2011-11-23  0:23 ` [35/53] USB: cdc-acm: Fix disconnect() vs close() race Greg KH
2011-11-23  0:23 ` [36/53] USB: workaround for bug in old version of GCC Greg KH
2011-11-23  0:23 ` [37/53] USB: ark3116 initialisation fix Greg KH
2011-11-23  0:23 ` [38/53] USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c Greg KH
2011-11-23  0:23 ` [39/53] usb-storage: Accept 8020i-protocol commands longer than 12 bytes Greg KH
2011-11-23  0:23 ` [40/53] USB: EHCI: fix HUB TT scheduling issue with iso transfer Greg KH
2011-11-23  0:23 ` [41/53] USB: add quirk for Logitech C600 web cam Greg KH
2011-11-23  0:23 ` [42/53] USB: quirks: adding more quirky webcams to avoid squeaky audio Greg KH
2011-11-23  0:23 ` [43/53] xfs: fix error handling for synchronous writes Greg KH
2011-11-23  0:23 ` [44/53] xfs: fix xfs_mark_inode_dirty during umount Greg KH
2011-11-23  0:23 ` [45/53] xfs: dont serialise direct IO reads on page cache Greg KH
2011-11-23  0:23 ` [46/53] xfs: avoid direct I/O write vs buffered I/O race Greg KH
2011-11-23  0:23 ` [47/53] xfs: Return -EIO when xfs_vn_getattr() failed Greg KH
2011-11-23  0:23 ` [48/53] xfs: fix buffer flushing during unmount Greg KH
2011-11-23  0:23 ` [49/53] xfs: Fix possible memory corruption in xfs_readlink Greg KH
2011-11-23  0:23 ` [50/53] xfs: use doalloc flag in xfs_qm_dqattach_one() Greg KH
2011-11-23  0:23 ` [51/53] xfs: fix ->write_inode return values Greg KH
2011-11-23  0:23 ` [52/53] drm/i915: fix IVB cursor support Greg KH
2011-11-23  0:24 ` [53/53] drm/i915: always set FDI composite sync bit Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111123002406.486745749@clark.kroah.org \
    --to=gregkh@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=alan@linux.intel.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tomoya-linux@dsn.lapis-semi.com \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®